Aceton Industries LLP Kandivali, Mumbai, Maharashtra

We are engaged in processing, supplying and exporting high quality Silica Sand. Silica sands offered by us have fetched repeated orders from our industrial clients and this symbolizes the trust that we have garnered in the industry and acts as a testimony of quality of these products. Before being supplied in the market, these products are tested stringently n different parameters by our experts. The products are offered are 100% natural and pure. Features:•Long shelf life•Accurate composition•Moisture free Specifications:•For manufacturing glass, disodium ultramarine, synthetic foundry molding catalysts and water purification silica sand is used•Silica sand also finds its application in acid heat resistantceramics, pottery glaze, refractories and enamel•Silica sand with 150 meshes is largely used in sawing stone, grinding and surfacing glass as well as polishing marble•Rounded grains of silica sand are used for sand blasting as well as fillers in paints, gypsum Plasters, 'wood paste' molded hard rubber goods, ox chloride acoustic plasters and soap

Application : Construction

Grade : Standard

Application : Construction

we, aceton industries llp from 2018 are one of the famous manufacturers, traders, exporters, and wholesalers an extensive array of cement and ready mix plaster. Our offered range consists of best grade fly ash, pond ash, ready mix plaster, red oxide, gypsum plaster, ground granulated blast furnace slag (ggbfs), lime powder, copper slag, aac blocks, clc blocks, fly ash bricks, silica sand, cement, . All offered products are prepared using pure ingredients at well-equipped infrastructure unit. This product range is required for their longer shelf life, top quality, and nominal costs. Also, the presented products are available in various forms and packing options as per the exact requirements of patrons.

gypsum is calcium sulphate dihydrate (caso4.2h2o) deposited in sedimentary layers on the seabed. Under high pressure and temperature, gypsum turns into anhydrite (caso4). Gypsum / anhydrite are produced from open-cast mines or underground mines. Gypsum is normally only screened to remove ‘fines’ (mainly mudstones), then crushed and finely ground for various applications. Gypsum is an indispensable component of ordinary portland cement as it has a great influence on water consumption of standard consistency and strength simultaneously. During the cement manufacturing process, 4%-6% of gypsum (by weight) in crushed form is introduced during the final grinding process upon cooling of clinker. It plays an important role in controlling the rate of hardening or setting of cement. If not added, the cement will set immediately after mixing of water leaving no time for concrete placing. Over 60% of gypsum produced across the world is used in cement manufacturing. Other applications include the production of plaster, plasterboards, gypsum fiberboard and gypsum blocks. It can also be used as a soil conditioner and has various other specialized applications. An important property of gypsum is that it is naturally fire-resistant.  

Color : White

blast furnace slag is a by-product from the manufacturing of steel in a blast furnace. Initially, in its molten form, it is diverted to a granulator where it is quenched with water and rapidly cooled to form glassy, non-metallic granules which are silicates and aluminosilicates of calcium. These granules are dried to produce granulated blast furnace slag (gbfs) and then ground to a suitable fineness to produce ground granulated blast furnace slag (ggbfs). When used as a cementitious material in concrete, ggbfs enhances long-term performance and durability characteristics while reducing life-cycle and maintenance costs. Gbfs is ground to a controlled fineness through vertical roller mills with the latest technology and quality control systems to produce ggbfs. The grinding process takes account of mean particle size, grading (particle size distribution) and particle shape, thus giving quality-assured material which is consistent, predictable and suitable for varied applications. 

Color : White

we aceton industries llp certified company are a well-reckoned exporter and supplier of wide variety of products fly ash powder, fly ash, dry fly ash, bottom ash & pond ash & many more is of and in the export market in the saudi arabia, gulf countries, srilanka, mauritious, middle east australia, east asian countries, europe, african countries and worldwide markets. Fly ash is considered to be a byproduct from burning pulverized coal in electric power generating plants. The fly ash is a kind of artificial pozzolan, particularly designed and processed to attain maximum performance on most of the cement and concrete applications. In the course of producing high-quality industrial fly ash use for - cement industries, concrete plant, highway road filler & construction industries etc.

Type : Fly Ash

Application : Cement, Concrete, Construction

Color : Grey, Light White

Feature : Acid-Proof, Anti-Algae, Artistic Ceilings, Radiation-Resistant, Refractory

Condition : DRY

Form : Powder

Brand Name : Premium Pozz Fly Ash

fly ash brick (fab) is a building material, specifically masonry units, containing class c or class f fly ash and water. Compressed at 28 mpa (272 atm) and cured for 24 hours in a 66 °c steam bath, then toughened with an air entrainment agent, the bricks last for more than 100 freeze-thaw cycles. Owing to the high concentration of calcium oxide in class c fly ash, the brick is described as "self-cementing". The manufacturing method saves energy, reduces mercury pollution, and costs 20% less than traditional clay brick manufacturing. ever since fal-g (fly ash-lime-gypsum) process is introduced in 1991, fly ash brick activity has been revolutionised in india. developed and patented by drbhanumathidas and kalidas has simplified the process by adding gypsum to fly ash+lime/cement, converting the calcium aluminates into calcium alumino-sulphates resulting in to achieve high early strengths.thus fal-g brick does not need any pressure and gets cured at ambient temperature of 20-40 °c. By avoiding both press and heating chamber, fal-g process has brought down the multi-million plant cost to a few lakhs, within the reach of micro units

Color : Grey

Copper Slag is a byâ��product obtained during the matte smelting and refining of copper. It is formed when molten slag is cooled slowly, forming a dense, hard crystalline product. Quick solidification by pouring molten slag into water gives granulated amorphous slag. Quality control is done through systematic control of the smelting process, and testing of composite samples at the in-house as well as independent laboratories. Applications of Copper Slag include abrasive blasting, building materials, landfilling, road construction, abrasive tools, cutting tools, tiles and glass and roofing granules. Replacing sand by Copper Slag in blasting applications will lead to safer and cleaner dust free environment, gives high quality and high efficiency. It cuts the surface faster resulting into low man-hours requirement and near to white metal finish.Copper Slag has similar properties to sand,and is a very effective substitute during monsoon (rainy) season. Further, Copper Slag is also used in the production of cement, mortar and concrete as a raw material for clinker, cement replacement, coarse and fine aggregates. Central Road Research Institute (CRRI) recommends usage of Copper Slag in road construction and structural fill applications. It is very good substitute of soil for land filling. Copper Slag is also cost-effective compared to soil and helps conserve the environment Chemical Properties: Silica SiO 2 [combined as silicate] : 26 - 30% Free Silica :

Color : Black

clc is called as cellular light weight concrete and it is also called as foam concrete. Cellular light weight concrete (clc) is a version of light weight concrete that is produced like normal concrete under ambient conditions. clc blocks are a cement-bonded material made by blending slurry of cement.

Color : Grey

India is the second largest producer of cement in the world, with production capacity expected to grow to 407 Mtpa by 2020. As one the leading distributors of cement in Western India, helps you select the right type and brand of cement for your requirements, and backs it up with reliable, timely supplies, efficient customer service and technical support. We are authorized distributors for all major cement manufacturers in India. We can supply the following types of Cement for various applications: Grey Cement Ordinary Portland Cement (OPC) - Grade 42.5/ 53 Portland Pozzolana Cement (PPC) Portland Slag Cement (PSC) White Cement Special Cement Sulphate Resisting Cement (SRC) Oil Well Cement Clinker Our customers include the biggest ready mix concrete producers, real estate and infrastructure developers/ contractors, retailers as well as global traders. Our systematic and professional approach to business, coupled with high standards of ethics and integrity, have contributed immensely towards our credibility and long-term relationships with customers. We supply Cement and Clinker in local and export markets.

Color : Grey

AAC is a highly thermally insulating concrete-based material used for both internal and external construction. Besides AAC's insulating capability, one of its advantages in construction is its quick and easy installation, because the material can be routed, sanded, or cut to size on site using standard carbon steel power tools. AAC is well suited for urban areas with high rise buildings and those with high temperature variations. Due to its lower density, high rise buildings constructed using AAC require less steel and concrete for structural members. The requirement of mortar for laying of AAC blocks is reduced due to the lower number of joints. Similarly, the material required for rendering is also lower due to the dimensional accuracy of AAC. The increased thermal efficiency of AAC makes it suitable for use in areas with extreme temperatures, as it eliminates the need for separate materials for construction and insulation, leading to faster construction and cost savings. Even though regular cement mortar can be used, most of the buildings erected with AAC materials use thin bed mortar in thicknesses around â�� inch, depending on the national building codes. AAC materials can be coated with a stucco or plaster compound to guard against the elements, or covered with siding materials such as brick or vinyl.

Size : 12x4x2 Inch, 6x5x3 Inch, 9x4x3 Inch

Type : Aac Block, Aerocon Bricks, Decorative Concrete Block, Ordinary Concrete Block

Material : Aerated Concrete, Cement, Silica Sand, Fly Ash, Gypsum

Application : Floor, Partiton Walls, Roof, Side Walls

Processing : Machine

certifacation : Ce Certified

Brand Name : Premium

Condition : New