Advanced Industrial Micro Systems Goregaon, Mumbai, Maharashtra

Tube Crimping Machine  for crimping of Aluminium & Collapsible Tubes with BNo, ExpDt, etc. embossing available. Speeds upto 30 tubes per minute is obtainable.

Tray Wrapping machine Model TWM-450 is useful for wrapping transparent cellophane type PVC stretch film on open trays of snacks & packets. This type of transparent packing makes the product look attractive as well as increases the shelf life. The contact parts are made of SS & it is equipped with a roller to mount the Film Roll, a cutter to cut the film to size as per the tray dimensions & a heater pad to seal the film under the tray, once it is stretched & wrapped. It is used on department check-out counters, for packing Fruits, Vegetables, Seafood, Sweets, etc. in trays.

Transfer type Motorized On-line Pipe Coder Model PPC – 35 – T is a compact, fully automatic PLC based printer for 1 to 4 lines printing of ISI mark, Mfg. Dt., Company Name, Logos, etc. on all types of rigid or soft type PVC / Polyethylene / HDPE / PV pipes & tubes, etc. of diameter 20 mm to 200 mm during extrusion process. The message to be printed is Engraved onto Metal Drum (cleaned by Doctor Blade) from where it is transferred by soft Silicon Rubber roller which prints onto the pipe. The inking is in the form of Ink Pot where all types of simple Inks can be used. The PLC has a bright LED display to set the printing repeat from 0.5 Meter to 25 Meters. It also displays the length of pipe extruded, no. of prints that have taken place & the linear speed of extrusion in meters / min. Also, a production length can be set & it can give an alarm & relay signal after the preset length of pipe has been extruded. (Free accessories include 1 Lit. Blue Paste Ink & 1 Lit. Solvent). These coders are ideal for Automatic On-Line Coding on various types of tubes & pipes during their extrusion process or as off-line printers also for manual printing.

We offer table top hot foil coder.these coders are ideal for semi-automatic coding. As soon as the product is put on the platform, coding is done automatically. the 3-line message to be printed is easily composed by pushing the brass stereos into the grooves & tightening them. The inking is in the form of foil ribbon, which passes below the stereos & is advanced automatically after each print. The brass stereos are heated to a temperature of around 150 deg. C & hit the film onto the substrate thus transferring the print with embossing. these are portable, compact and easy to install units. Simply plug the system into any electrical outlet of 230 vac at your site to start printing.

Table Top Electro-Mechanical (motorized) Coder Model EMC – 100 – T with Digital display, soft touch keys & production counter, for semi-automatic registered printing of B.No., Mfg.Dt., Exp.Dt., M.R.P. `, etc. The stereos used are flat or grooved type which can be easily press fitted & replaced daily for a max. 6 to 10 line printing area of 50 X 100 mm. It has in-built settable timer for speed control & also has Foot Switch for controlled operation to give production speeds from 1000 to 2500 pieces per hour depending upon operator skill. (Free accessories include 1 Lit. Ink, 1 Lit. Solvent, 4 mm Grooved Rubber Character Set, Ink Cartridge & Foot Switch). This coder is multi-purpose & suitable for registered printing on pouches, labels, laminated cartons, tins, bottles, etc.

Table Top Electro – Embossing Type Pneumatic Coder Model EPC – 35 – TM for semi-automatic registered EMBOSSING of B.No., Mfg.Dt., Exp.Dt., M.R.P. `, etc. The 3 to 4 line message (of 10 character in each line) to be printed is easily composed by putting Stainless Steel Characters & tightening them for speeds upto 90 impressions per minute for a max. 4 line printing area of 25 X 25 mm. It has in-built settable timer for speed control & also has Foot Switch for controlled operation to give production speeds from 2000 to 5000 pieces per hour depending upon operator skill. Quality Pneumatic accessories ensure reliability & long life. (Free accessories include 1 set of 0 to 9 in Stainless Steel & Foot Switch). This coder is suitable for registered Embossing on pouches, labels, cartons, etc.

Table Top Electro-Mechanical (motorized) Coder Model EMC – 35 – T with Digital display, soft touch keys & production counter, for semi-automatic registered printing of B.No., Mfg.Dt., Exp.Dt., M.R.P. `, etc. The stereos used are flat or grooved type which can be easily press fitted & replaced daily for a max. 4 to 6 line printing area of 35 X 35 mm. It has in-built settable timer for speed control & also has Foot Switch for controlled operation to give production speeds from 1000 to 3000 pieces per hour depending upon operator skill. (Free accessories include ½ Lit. Ink, ½ Lit. Solvent, 2.5 mm Grooved Rubber Character Set, Ink Cartridge & Foot Switch). This coder is multi-purpose & suitable for registered printing on pouches, labels, laminated cartons, tins, bottles (curvature), etc.

High Speed Table Top Coder Model TTC – 380 – T for registered printing of B.No., Mfg. Dt., Exp. Dt., MRP `, etc. using Print-Dry Solid Wax System. The message (upto 6 lines) to be printed is composed by assembling changeable brass or grooved rubber stereos by pushing them onto the rods on the print drum. The stereos & the replaceable circular hot wax ink cartridge are heated to a temperature of around 150oC for printing on the substrate, so it is instant drying. The labels / cartons (max. size 200 X 380 mm) are stacked or fed individually in the input tray for feeding, automatically picked up one by one by the reverse roller, passed under the print head & stacked in the collection tray at speeds upto 300/min. The location of printing is electronically settable by trim-pots & also a preset counter can be set for the coder to stop automatically when the desired production is over. (Free accessories include 2 mm Numeric Brass Character Set & Hot Wax Ink Cartridge). This coder is ideal for Automatic High Speed Coding on large quantities of labels & cartons.

Stretch Wrapping machine Model SWM-2100 is fully automatic & can operate continuously under severe industrial conditions. This kind of setup not only allows it to work as a conventional stretch wrapper but also as a top bander or semi-automatic stretch wrap machine if required.

Skin Packaging Machine Model PSP-390 is a new pattern commodity packing technique. No need for moulding mould. Skin Packing can prolong storage life and strength. It can be used for hardware, spare parts, medicine equipment, electric component, toy, stationery, dishware and craft products etc. We offer one of the best quality skin packing machine and automatic skin packing machine as well.

Type : Skin Packaging Machine

Certification : CE Certified

Color : Grey

Voltage : 440V

Condition : New

Function : Packing

Automatic Grade : Semi Automatic

Power : 5-7kw

Packaging Type : Bottles

Driven Type : Electric

Weight : 100-1000kg

Country of Origin : India

Brand Name : AIMS

Simple Hand Stamping System Model HSS-60-B for manually printing B.No., Mfg.Dt., Exp.Dt., M.R.P. `, etc. on plastic, glass, metal, paper, etc. The system uses flat or grooved type rubber stereos which can be easily press fitted & replaced daily, 2 nos. stamping holder of size 40 mm X 60 mm & 40 mm X 40 mm, to give 4 to 6 lines of printing & separate Stamp Pad. (Set inclusive of 100 ml. Ink, 100 ml. solvent, 3 mm Grooved Character Set, Stamp Pad, 2 nos. Hand Stamp holders). This coder is suitable for printing on pouches, labels, laminated cartons, tins, etc.

Thermal Shrink Packing Tunnel Model SPT-4525 of size 10” X 18” where the product is put into the PVC / POF / PP shrink sleeve & passed through the tunnel, the conveyor moves the product through the heat chamber with fan for uniform heating, and the finished, sealed product comes out from the other side giving skintight transparent packing that is tamper proof & has to be torn to use product. This sealer is suitable for shrinking gifts, mineral water, bottles, cosmetics, etc.

Semi Automatic Cup Sealer  for sealing glasses / cups made of EPS, PS, PP, etc. of beverages, soup, water, etc. The container is pushed inside the machine where the lid is cut & sealed over it from the roll & the sealed container is then pulled out with automatic advancement of sealing film. This is Ideal for Mineral Water, Shrikhand, Carry-Out Bowl products, Soups, Jelly, Pudding, etc.

Hand Held Pipe Coder Model PPC – 35 – M is a compact, Manual printer for 1 to 4 lines printing of ISI mark, Company Name, Logos, Batch No., etc. on all types of rigid or soft type PVC Polyethylene HDPE PV pipes & tubes, etc. of diameter 20 mm to 400 mm. The message to be printed is very easily composed by just sticking the low-cost rubber nylon stereos (easily changeable) on to the print wheel. The inking is in the form of rechargeable cartridge, so color of printing can be changed easily by changing cartridge. (Free accessories include 1 Lit. Blue Ink, 1 Lit. Solvent, 6 mm Flat Rubber Character Set, Double Sided Tape & Ink Cartridge). These coders are ideal for Manual Hand Held Printing on various types of tubes & pipes after extrusion process.

Type : Round Stamp

Shape : Round

Application : Stamping Use

Color : Black, Green, Red, White, Yellow

Condition : New, Used

Feature : Durable, Easy To Use, Optimum Quality, Unbreakable, Water Resistance

Inner Material : Rubber, Silicone Rubber

Hema Material : PE, Plastic, PP, PVC

Portable Non-Contact Ink Jet Pen Model IJP –Speed–i–Jet 798(REINER – Germany), which is a  Zero Maintenance, 300 dpi high resolution, Battery Powered ONE line (character height 3.2 mm) Printer & can be used on any Porous products to print B.No., Exp.Date, Time, Serial No. (AGMARK), etc. on labels, cartons, etc. It is fully programmable through the computer where it can print 1 line of Data at a very low price. This printer is a totally mobile Solution for Time Date Numbering,…uses such as; Parts Marking, Package Marking and validating in surgeries, pharmacies, and hospitals, marking dockets and packages in transit, quality control validation, laboratory timing and checking, production controls, delicate product marking, nightclub and meetings entry validation, etc. The system is inclusive of below mentioned accessories worth Rs. 25,000/- free of cost: a. 2 Nos. AA Rechargeable Batteries, Computer Software, USB Data Transfer Cable. b. 1 No. disposable Pre-mix Black ink cartridge, Cartridge cleaning Wipe. c. Operator Tool Kit, Operation & User Manual, Configuration Software on CD This printer is fully Electronic without CORE system & does not have any air pump, viscosity control unit, filters, etc. & so there is no maintenance required (No AMC). It does not require separate make up or wash solution as everything is included in the disposable ink cartridges making it very user friendly for the Operator. The running / Printing cost is only about 4 Paise per impression (25 char).

Portable Induction Sealing Machine Model ISM-500 utilizes the electromagnetic induction principle to produce instant high heat to manually adhere the melted Wad type aluminum foil sheet to the bunghole of PP / HDPE / LDPE / PET bottles / jars. The advantage of this machine is that there is no surface heat for sealing the caps so that the bottles or caps cannot get damaged. This is useful for leak proof sealing in pharmaceuticals, cosmetics, food industry, etc.

Portable Heat Sealing Machine Model HSM-500 utilizes the high heat to manually adhere the melted type aluminum foil sheet or PP / plastic cap to the bunghole of PP / HDPE / LDPE / PET bottles / jars. It is an economy model with a big 5” diameter round heater plate for sealing even big size jars, containers & bottles. It has a Thermostat control for maintaining Temperature & easy use heavy steel – chromium finish for fast sealing action. This is useful for sealing in cosmetics, food industry, pharmaceuticals, etc.

Material : Mild Steel

Finishing : Powder Coated

Driven Type : Electric

Shape : Rectangular

Color : Gray

Condition : New

Power : 1-3kw

Pressure : Low Pressure

Certification : ISO 9001:2008 Certified

Voltage : 220V

Capacity : 100-200kg/h

Width : 70mm

Packaging Type : Wooden Box

Overall Length : 65mm

Size (mm) : 400mm

Specialities : Rust Proof, Long Life, High Performance, Easy To Operate

Dimension (LxWxH) : 580x360x385mm

Machine Weight : 30kg

Phase : Single Phase

Warranty : 1 Year

Country of Origin : India

Operating Mode : Automatic

Corrosion Resistance : Yes

Machine Structure : Horizontal

Reverse Rotation : No

Is It Variable Speed : Yes

Open Blade Motorized Pad Printing Machine Model PPM – 520K is an automated replacement for Screen Printing & is used for very high quality printing of size up to 3½” X 3½” for LOGOs, manufacturing date, ingredients, bar code, issues, etc. on industrial products of food, cans, beverage, cosmetics, electric apparatus, pharmacy, etc. It can print on any flat, curved or uneven surface on metal, plastics, glass, ceramic, nylon etc. at speed upto 2000 strokes per hour. It uses a flat metal etched plate which carries the image, thick liquid paste ink which is cleared with an open blade & a soft silicon rubber pad which picks up the image from the plate & transfers it on to the substrate. (Free accessories include small Silicon Pad & Metal Plate). This coder is suitable for printing LOGOs & fixed information on small jars, glass, foil, tins, bottles (curvature), etc. Multiple machines can be used for multiple colors.

we offer On-Line Pipe Printer.These coders are ideal for Automatic On-Line Coding on various types of tubes & pipes during their extrusion process. The message to be printed is very easily composed by just assembling the stereos (easily changeable) on to the print wheel. The Inking system consists of a rechargeable circular cartridge, which is fully enclosed, allowing the use of fast-drying & indelible solvent-based inks. The whole assembly is directly mounted in front of the extruder where the extruded pipe passes over the rollers of the system. The PLC or controller takes the signal from the Digital Encoder & gives signal to the DC Stepper Motor to turn the print wheel automatically at the synchronized speed with the pipe to do the codingprinting after every preset distance.

We are offering on-line hot foil coder (hfc). These coders are ideal for semi-automatic coding. As soon as the product is put on the platform, coding is done automatically. The 3-line message to be printed is easily composed by pushing the brass stereos into the grooves & tightening them. The inking is in the form of foil ribbon, which passes below the stereos & is advanced automatically after each print. The brass stereos are heated to a temperature of around 150 deg. C & hit the film onto the substrate thus transferring the print with embossing. These are portable, compact and easy to install units. Simply plug the system into any electrical outlet of 230 vac at your site to start printing.

Hand Held Coder Model HHC – 95 – SP is an easy to use large character manual printer for in-house printing of Batch No., Product Name, Handling Instructions, LOGOs, etc. on Corrugated master cartons, paper bags, cement sheets, plywood, etc. in place of Stencils or Screen Printing. The message to be printed is composed by push fitting the easily changeable grooved stereos on to the grooved ring drum. The inking system consists of a rechargeable ink cartridge & the stereos re-ink automatically as they pass below the cartridge. Maximum printing area is 95 mm X 300 mm. (Set inclusive of 1 Ink Cartridge, 1 Lit. Ink &14 mm. Alphanumeric Character Set.) This coder is suitable for printing LOGOs & fixed information on Corrugated Cartons, Plywood, etc.

Multi-Functional Plastic / Metal Cap Locking & (ROPP) Capping Machine Model LCM-50D for automatically fixing the caps onto PET or Glass type bottles. The cap gets sealed & when twisted, opens with a snap & leaves a separate ring at the bottom. It is used for locking of plastic or ROPP metal caps on beverage & pharmaceutical bottles. Available in Paddle & Semi Automatic Model. Customized in Standard & GMP Model.