Back Back
reactors seals
Get Price Quote
1 Piece (MOQ)
Seal type SSI-107GL are factory assembled & dynamically tasted cartridge units for steel, glass lined, ss mixers, agitators & vessels. These are used with non pressurized barrier fluid preferably clean soft water because of its good heat transfer qualities. Fluids like oil, hydrocarbon, solvents etc. can also be used as buffer fluid by considering the corrosion resistance of wetted parts & compatibility with main media to be sealed. These seals are supplied with cooling water jacket, which ensure cool running of seals. SSI-107 Mechanical Seal for Vertical Type Agitation Equipment Structural Features: SSI-107GL is Single end unbalanced and balanced, wet seal without bearing arrangement. The component is cartridge seal with easy installation. Industrial Standards: HG21571-95 Scopes of Application: mainly used in top driven vertical type agitation equipment, which does not have strict requirements for leak proof ness. Operation Parameters Pressure: – 0.1 ~ 0.6 MPa (when the pressure is bigger than 0.6 MPa, the pressure balancing device is needed and its connection size can be customized) Temperature: – 20 ~ 150 ºC (cooling tank is required if the temperature is higher than 150 ºC and the installation height should be 100 mm higher than normal) Linear Speed: 2 m/s or less Materials Rotary Ring Face: SiC/Carbon Stationary Ring Face: CERAMIC/SiC Elastomers: /PTFE/FFKM Springs: /SS316/HC-276 Metal Parts: SS304/SS316/SS316 Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.
ME-610 Reactor Seal
25,000 - 150,000 Per Piece
1 Piece (MOQ)
Best Deals from Agitator Seal
Agitator Seals
2,000 - 2,200 Per Piece
R300 Agitator Mechanical Seal
15,000 - 80,000 Per Unit
1 Unit (MOQ)
R300 – Double mechanical seals with Bearing Etannor is a well-known and established partner in the designing and manufacturing of mechanical mixer seals. We offer mixer and agitator seals as single seals and as double mechanical seals. Each type is equipped with a number of barrier fluid, flush and grease connections. To increase the life and runtime of the seals, we offer wide range of seal support systems. All steel components are made out of stainless steel SS316 for the best achievable chemical resistance. Other materials are available upon request.
Agitator Mechanical Seal
350 - 500 Per Set
1 Piece (MOQ)
Double Agitator Reactor Mechanical Seal
35,000 Per Piece
1 Piece (MOQ)
Agitator Seals
Get Price Quote
Seal Type 510/D and 510/D/B Mechanical Seals are designed for Top, Side and Bottom Entry Drives in Agitators and Reactors. Compact Economical Cartridge Double Mechanical Seal for Agitators and Reactors. Seal Type 510/D/B Design Incorporate with location of Bearings very close to the Seal. These Seal specially designed for any mixed and pressurized liquid in Vessel with Top Entry Agitators where no leakage in Process Gas OR Fluids to the Environment can be tolerated. Complete Pre-assembled Tested Unit ready for installation. These Seal are used for Exclusive Solid Seal Faces, Stationary Seats, thus Lowest Level of Seal Face distortion when Expose to Compressive Load and Thermal Pressure.
Agitator Mechanical Seal
31,500 - 65,000 Per Piece
Agitator Seals
10,000 - 22,000 Per piece
5 Piece (MOQ)
AGITATOR SEAL Lineproof Engineering is a leading manufacturer and exporter of best quality Agitator Seals. This seal is precisely manufactured with high precision by utilizing paramount quality raw materials and contemporary techniques in tune with the international quality standards. The offered seal finds application in agitator for providing air tight sealing. Furthermore, our patrons can purchase this seal in varied sizes, at highly competitive prices from us. Industrial Application: Chemical, Pharmaceuticals, Drugs & Polymer Industries. Face Materials: Tungsten Carbide, Carbon, Silicon Carbide, Ceramic. Metal Component: S.S 304, S.S 316, Alloy 20, Hastelloy C. Secondary Seal: Viton, EPDM, Silicon, Grafoil, PTFE, FFKM. Operating Limits: Pressure : 40 bar Temperature : -40˚C to 200˚C Speed : Subject to specification.
Agitator Mechanical Seal
Get Price Quote
We offers agitator mechanical seal. Applications generally used for pulper, plastics & pharmaceutical industries operating limits shaft dia. : 40 to 200mmpressure : up to 60 barstemperature : -20 to 200 c
Agitator Mechanical Seals
Get Price Quote
Agitator Mechanical Seals are available with us in precision design and construction standards. Our range includes Single Dry Running Mixer Seal that provide working as single dry running seals, which are used in top entry low RPM mixers and agitators. These Agitator Mechanical Seals can be mounted on top, bottom, side or angular entry shafts in the mixer. We offer lots of designs to suit various applications as these are tailor-made and designed according to process conditions and equipment. We make available these Agitator Mechanical Seals with seal face options of Carbon/Sic/TC v/s Ceramic/Sic/TC and others with secondary seals options including Kalrez/Viton/FEP/PTFE and others. Other than this, the metal components utilized here include Hast-B, Hast-C, SS-316L and others. Applications Used in top entry mixer vessels in pharmaceuticals & chemical industries Also used in Plastic, Pharmaceuticals, Paper & Pulp and Sugar Industries
Bottom Entry Agitator Seal
12,500 Per Piece
1 Piece (MOQ)
Salient features: Balanced for Optimum Performance Unique Seal Face Design for Vacuum Conditions Vergin PTFE Wrapped O Ring Compitible with multiple Chemicals Complete Cartridge Unit Factory Assembled & Tested Less Components Robust for rugged environment Applications: Specially used in paper and pulp Industries, petrochemicals, petroleum refinery etc. Material: Seal Faces: Ceramic/Sic/Carbon Vs Ceramic/RB Sic./TC Secondary Seals: Viton/PTFE/GFT/FFKM Metal Components: SS-316/Hast-C/Carpenter-42
Agitator Seal
Get Price Quote
Agitator seal, Features: DOWNLOAD CATALOG DOuble Seal Unbalance seal Cartridge unit Easy installation Independent of direction of rotation
Agitator Mechanical Seals
12,000 Per Piece
1 Piece (MOQ)
Dry Running Agitator Seal
7,500 Per Piece
The basic materials named as raw materials should be of top-notch quality in order to maintain the quality of the finished goods. Thus, our experts source the raw materials only from the reliable vendors. Our team of quality analysts strictly tests each product against varied quality parameters ensuring zero defects at buyer's end. Specifications : Pressure - Up to 1.40 MPa Temperature - 10 to 150ºC Application - Industrial
Agitator Seals
Get Price Quote
Motivated by the aim to deliver nothing short of the best, we have grown as a reliable supplier of Agitator Seals in the market. We follow strict warehousing rules and thus we keep the extensive range of products safe in our well-structured warehouse, which is supervised by our team of experts. Features : Sturdy material Precision made Industrial application
Double Agitator Seal
Get Price Quote
25 Set(s) (MOQ)
These double agitator seals remain intact even at very high temperature and pressure. Our double agitator seal is made using materials which are resistant to breakage and other damages, thus highly reliable in use. Our double agitator seal is used for preventing the leakage of various chemicals and their vapors. raw materials used : •ss 304 ss 316 •carbon •silicon carbide •tungsten carbide •ceramic •viton •epdm •encapsulated ptfe •gft •carlez used for : •petrochemicals & its vapors •general chemical & its vapors •light hydrocarbons & its vapors specifications : •shaft diameter : 25 to 150 mm •pressure : 35 bar (max) •temperature : 200oc •shaft speed : 600 rpm (max) •vessel pressure : 1.5 bar
Reactor Dry Seal
Get Price Quote
Applications : Food Products Pharmaceutical Products Mixers Agitators.
Agitator Seals
Get Price Quote
Agitator Mechanical Seals
Get Price Quote
Our team members assist us in settling down the payment procedures and they help us in making transactions that are completely secured and are executed as per the client's convenience. To ensure quality of the products, we conduct diverse quality tests at all stages and thus our products are quality assured. Operating Limits : Pressure - up to 1.40 MPa Temperature - (-)10c to (+)150c Speed - up to 1 m/s Sizes - 25 mm to 100 mm Material - Seal Face - Carbon, Silicon, Ceramic, TC Secondary Seals - Viton / PTFE Metal Parts - SS 316, SS-304
Agitator Seal
Get Price Quote
HIGH PRESSURE AGITATOR SEAL
Get Price Quote
Our factory assembled High Pressure Double Mechanical Seals are used on mixers, agitators & reactors. These double mechanical seals are designed for handling severe & hazardous fluids. The design incorporates bearings located very close to seal to avoid cantilever effect at seal area. As a standard cooling jacket is provided in the seals to dissipate maximum amount of heat generated by the seals. Seals can be given without bearing, if equipments bearings are very close to seal area. We also offer double dry runniing seals to avoid the risk of contaminating costly batches.
Agitator Seal
Get Price Quote
A preassemble cartridge seal designed to work according to the applications. Agitator seals may be top, bottom or side entry design as suitable. It is tested unit which is readily available for installation.
Dry Running Agitator Seal
Get Price Quote
Our Dry Running Agitator Seal offers good performance in high vacuum conditions. It requires no auxiliary equipment for installations. Our range are quality tested at every level and are offered at industry leading price. Item Code: LS102 Type LS102 : seals are outside mounted balanced seal, which require no shaft or sleeve step for balancing LS102 seal shows good performance in high vaccum conditions. Since no auxiliary equipments are needed for installation, it is very cost effective & economical. These seal can be easily installed & repaired on the field to minimized replacements costs & downtime. Main features of the LS102 dry running seals are : Simple, rugged drive design that withstands shaft movement vibration & deflection. Seal design eliminates the need of auxiliary equipments for cooling & lubricants for mixer application. It eliminates the possibility of product contamination, since there is no use barrier fluid. Can be used in high vaccum applications. These seals are very cost effective. Seals with bearing can be provided for vessels having greater misalignments with special arrangement. Applications : Used in top entry mixer vessels in pharmaceuticals & chemical industries. Material : • Seal Face : Carbon Vs Ceramic/Sic/TC • Secondary Seals : Nitrile/Neoprene/Viton/PTFE • Metal Components : SS-316 Operating Limits : • Shaft Dia : 25 to 100mm • Pressure : up to 1.40 MPa • Temp : -10 to 150°C • Speed : up to 1 m/s
Agitator Seals
2,200 Per
Agitator Seal
Get Price Quote
We offer superior quality agitator seal in the industry. The dry running agitator seal supplied by us are recommended to be used in vacuum condition. These seal can be easily installed and repaired. Besides our agitator seals are effectively used in top entry mixer vessels the chemical as well as pharmaceutical industry. Apart from the above we are one of the chief standard agitator seal manufacturers in India. Main Features of the HR5 Dry Running Seals are: Simple, rugged drive design that withstands shaft movement vibration & deflection. Seal design eliminates the need of auxiliary equipments for cooling & lubrications for mixer application. It eliminates the possibility of product contamination, since there is no use of barrier fluid. Can be used in high vacuum applications. These seals are very cost effective. Seals with bearing can be provided for vessels having greater misalignments with special arrangement. Applications: Used in top entry mixer vessels in pharmaceuticals & chemical industries. Material: Seal Faces: Carbon Vs Ceramic/Sic./TC Secondary Seals: Nitrile/ Neoprene/Viton/PTFE Metal Components: SS-316 Operating Limits: Shaft Dia.: 25 to 100mm Pressure: up to 1.40 MPa Temp.: -50 to 150°C Speed: up to 1 m/s
Single Agitator Seal
6,800 Per Piece
Mechanical Agitator Seals
15,000 Per Set
2 Set (MOQ)
Agitator Seal
Get Price Quote
Agitator seal, agitators and vessels vary according to their position on the vessel, that is, whether the rotating shaft is top, side or bottom entry. Also, the material of the vessel, whether it is steel or glass lined, has a significant influence on the seal design. Seals for top entry vessels are expected to retain the gas or vapour above the fluid in the vessel. To do this, double seals are normally recommended, although for very light duties a single seal can be used. Unlubricated or dry running seals are being increasingly applied because they avoid the need for a seal lubricating system.
Agitator Mechanical Seals
Get Price Quote
Agitator Mixer Seals "Agitator Mechanical Seals" are top entry agitator double mechanical seal designed for medium to high pressure applications. These seal are successfully used for many years in all kind of mixer, reactors, paints and pulps etc. These seals can be easily installed without disturbing the delicase mating faces. Application Used in top entry mixer vessels in pharmaceuticals & chemical industries. Operating Limits Pressure : up to 1.40 MPa Temperature : (-)10c to (+)150c Speed :up to 1 m/s Sizes : 25 mm to 100 mm Material Seal Face : Carbon, Silicon, Ceramic, TC Secondary Seals : Viton / PTFE Metal Parts : SS 316, SS-304
Filter by Localities
