Agricultural Pump Dealers in Mumbai

• Usage: For Cutting

We offer disc harrow. Fourteen disc mounted harrow is secondary tillage equipment very commonly used in india for field preparatoin and used prior to harrow especially in fields with big shrub and wild grass. It essentially has high carbon discs arranged in tow rows on a sturdy channel frame. The front row has seven scalloped disc and the rear row has sever plain discs and it is ideally suited for 35 hp tractors of all makes and type with cat ii linkage. The discs are mounted on a 3 mm square bar with c I spools spacers in between to maintain disc spacing of 225 mm every alternate spacer has bearing hub with two new taper roller bearing and thus a total of twelve bearing are used in the harrow. The three point linkage bridge strut is made of flat 65 x 12 and the crank leveling lever is made of 28 mm dia road. Depth operation is controlled by tractor hydraulic model: 10 disc harrows (5 x 5) type: offset mounted disc harrow fitted in sturdy ms iron frame disc dia: 20" carbon steel discs square axle size: 28 mm bearings: cast iron spool bearings frame type: m s fabricated approx weight: 310 kg attachment: 3 point linkage adjustable hitch attachment model: 12 disc harrow (6 x 6) type: offset mounted disc harrow fitted in sturdy ms iron frame disc dia: 20" carbon steel discs square axle size: 28 mm bearings: cast iron spool bearings frame type: m s fabricated approx weight: 360 kg attachment: 3 point linkage adjustable hitch attachment model: 14 disc harrows (7 x 7) type: offset mounted disc harrow fitted in sturdy ms iron frame disc dia: 20" carbon steel discs square axle size: 28 mm bearings: cast iron spool bearings frame type: m s fabricated approx weight: 380 kg attachment: 3 point linkage adjustable hitch attachment

• Type: Dry Fog Machine
• Certification: CE Certified
• Color: Brown
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric

SKAN Fog (Ultra Low Volume) is a fogging machine for  spraying works for fumigation. The SKAN Fog ULV ideal machine designed to handle precision  spraying works, the ultra Precision Metering Valve assures ULV particles between 3 to 15 Microns for effective and better fumigation due to travel of lighter droplets for longer time in air. SKAN  Fog machine saves the consumption of the disinfectant solution and even time. Its area capacity  is up to 10000 cubic feet (Approx) and tank capacity is 5 liter.  

Thermal fogging machine available

• Size: 10-20mm, 20-30mm
• Material: Plastic
• Shape: Round
• Color: Black
• Feature: Good Quality
• Sprayer Type: Mist Spray
• Color: As shown in picture
• Packing size: Packed in Carton boxes
• Packing size: As per Customer Demand
• Warranty: 10 to 12 Months
• Features: Good Quality, Durable

Automatic disinfection systems and vehicle sanitization during docking and undocking are the key points for the factory manager to ensure complete end-to-end sanitization. Our solutions are scalable and customizable to fit your facilities and scheme of operation.

• Size: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Type: Mist Spray Pumps
• Material: Plastic
• Shape: Round
• Color: Black, White
• Finishing: Polished
• Country of Origin: China
• Brand Name: Yogiraj
• Plastic Type: PP
• Application: Spray
• Feature: Wholesale
• Custom Order: Yes
• Sprayer Type: Mist
• Metal Type: Non

UPVC Section (Used for Cabins)  Superior finish, concealed Piping, permanent structure. Fully automatic sensor based control. Manufacturing on order based. Looking for buyers from: Worldwide  

• Sanitizer Tank Capacity: 50/100/500 litres
• No. of Sprinkler: 8
• Input Electrical Supply: 230 Volts 50 Hz 1 Phase
• Current Rating: 3 Ampere
• No. of Light: 4
• Warranty: 1 Year

The tunnel is basically used to disinfect the body's passing through the tunnel, against the highly Contagious Virus Corona (Covid -19). Our Sanititation Chamber can be kept at various places such as Entry of Hospitals, Malls, Super Market, Schools, Colleges, Corporate office, Banks, Etc.    Sanitization Chamber is the solution for the gathering of infection freecrowd. This system enables distribution of disinfectant liquid and helps to sanitize the human body thoroughly. The loggers only start working when a body enters the tunnel the machine Is on for around 10 Seconds and this timing is sufficient for disinfecting the human body.    USING INSTRUCTIONS : One can place this machine at the entrance of a hospital, building, corporate company etc..  As the person enters he/she must enter through the sanitization tunnel, where he/she will get fully disinfected with the help of the machine and the further risk of infection can be avoided.    Features : Sanitizer tan capacity 5OO Liter  No of Sprinkles 8 Input electrical supply 230 volt 50 hz 1 phase Current Rating In Amperes 3 Ampere operation Start /off Automatic  No of operational Lights 4   Tunnel Details :  Enclosure Powder Coated mild steel and plastic sheet  Marerial of the tubes CPVC and PVC Floor high quality mat to kill/destroy virus using solution  Steps3 Overall dimensions of machine 3x5.5x10 in feet Gross weight of machine in kg 180 Short circuit protection yes

Voltage: AC 220 v to 240 v 50 to 60 hz Power: 600 w Preheat time: without preheating, straight out of the smoke Oil drum capacity: 3 l Fuel consumption: 1 liter can use 10 hours continuously Fan Angle: adjustable DMX512 signal: support 512 signal control Display: LCD control panel, remote control Product size: 590 * 500 * 450 mm Gross weight: 34 kg

We are engaged in supplying high pressure knapsack power sprayer which is 2 stroke engine driven. Our knapsack power sprayer delivers high volume of liquid spray. The knapsack power sprayer, offered by us, has 25 liters capacity tank, which reaches a controlled operating pressure of up to 300-350 psi, enabling it to achieve fine spray mist applications, even at extreme heights. The heavy-duty engine of knapsack power sprayer delivers a satisfying performance with the help of a dual acting reciprocating pump. further, a practical drain connector underneath the chemical tank ensures complete draining of the pesticide.

• Handle Material: Insulated Rubber
• MODEL NO:  NSS-FFEA-1732
• Product Category: Fire Fighting Equipment & Accessories
• Make: Safe Net
• Testing Voltage: 20,000 volts
• Use:  for breaking hard objects at the time of emergency.

• Material: Mild Steel
• Certification: CE Certified
• Voltage: 220V
• Frequency: 50Hz, 60Hz
• Automatic Grade: Automatic
• Warranty: 1 Yr

We are offering bitumen sprayer tank, fabricated from m.s plates with insulation and heating coils of various sizecapacity with spraying arrangements as per customers requirement and specifications, duly mounted on customers chassis.

• Country of Origin: India
• Type: Airless Paint Sprayer
• Certification: ISO 9001:2008
• Application: Painting
• Warranty: 1 YEAR
• Brand Name: HANDOK
• Model: 68:1
• Minimum Order Quantity: 1 Unit

• Material: SS
• Tank Capacity: 16 liters
• Pump Type: Brass
• Brand Name: HDC
• Automation Grade: Manual

• Capacity: 50ml to 500ml
• Material: HDPE
• Application: Hand Sanitizer Packaging
• Color: Transparent, White, etc
• Cap Type: Flip Top Cap

We are a well known Supplier and Exporter of Plastic Spray Pumps. We source the Spray Pumps from known vendors in the market. Our Pumps are known for their leak proof design and long functional life. Stringent quality-test ensures that only defect-free Pumps reach the buyers. We hold the expertise of delivering bulk orders of the Pumps within the allocated time. One can obtain them at nominal rates from us.

We are offering Transporting bulk bitumen

• Certification: CE Certified
• Application: Domestic
• Fuel: Electric
• Application: Industry
• Power: 1-3kw
• Structure: Single Stage Pump
• Warrenty: 1 Year
• Power: 0.5HP to 50 HP

Desirous of buying Fumigation Machine? We are one of the eminent Suppliers of a wide range. Get in touch with us for placing small as well as bulk orders, timely deliveries will be straight to your doorstep!

A Spray Nozzle is a device used for providing a controlled distribution of water in the cooling tower. Spray Nozzles that we offer are designed to deliver water in a spray pattern either by pressure or gravity flow. Full cone distribution pattern assures uniform water distribution for all film fills. Minimal spray overlap is required, providing uniform water distribution even near spray boundaries. These Spray Nozzles offer uniform water distribution over a wide range of operating water pressures.