Industrial Air Conditioning System Dealers in Andheri West, Mumbai

• Brand Name: DOZ

We manufacture FRP Ducts, FRP Chimney as per clients specification.

• Material: PVC/FRP Ducts
• Application: Industrial
• Brand Name: Plastic Fabricators
• Coating Thickness: 3mm and 5 mm
• Size: 200 mm Diameter to 2000mm Diameter

Main Features : . Small size, low noise, long life and convenient to operate. . Adopts 5:6 high efficiency screw compressor as refrigeration heart. The condenser and evaporator are made of imported high efficiency copper pipe from USA, Germany and Japan with world famous brand control parts built in. . Beautiful appearance, excellent performance. . SD type fitted with single compressor and SS type fitted with double compressors.

Bathroom louver manufacture, window louver manufacturers contractors, decorative window louver contractor, louver dealers, louver manufacturers, aluminum louver manufacturers, louver shutter dealers, louver shutter manufacturers, aluminum louver dealers, aluminum fabrication, customize louver manufacture….

We offer Sky Air Cooling System. Evaporative cooling is a physical phenomenon in which evaporation of a liquid, typically into surrounding air, cools an object or a liquid in contact with it. Latent heat describes the amount of heat that is needed to evaporate the liquid; this heat comes from the liquid itself and the surrounding gas and surfaces. When considering water evaporating into air, the wet-bulb temperature, as compared to the air’s dry-bulb temperature, is a measure of the potential for evaporative cooling. The greater the difference between the two temperatures, the better the evaporative cooling effects. When the temperatures are the same, no net evaporation of water in air occurs, thus there is no cooling effect.

The right scanning system for each type of material. The current position of the web is the basis. It is captured by one or more sensors as actual position. Ultrasonic Sensors (US) : The scanning of the web edge is realized contact-lessly by ultrasound. Optical Sensors (IR) : Non-contact scanning of the web edge is carried out by light. Contrast Sensors (CLS Pro CCD Pro) : The non-contact scanning of the web material is carried out by detecting optical contrasts

Architectural uPVC louvers are featured prominently over the exterior façade of the building there by increasing the aesthetic value of the façade. COOLFin louvers are made from UV stabilized uPVC. They can be ordered to exact sizes and are packaged with the supporting members that will be installed on the building surface. uPVC is the material of choice in building projects all across the world with established advantages over other materials such as concrete, aluminum or steel. The design team at COOLDECK relentlessly strives to create and achieve an elegant aesthetic look with the uPVC louvers /fins to complement the overall design of the building.   Advantages Enhance architectural appeal of the building.   Allow significant amount of light in the building while reducing ill effects of direct heat   Create a visual block but yet allow passage of cool air there by reducing energy cost.   Inexpensive solution compared to alternate high quality materials.   Available in UV stabilized colors to match the other components of the facade   Project pipes and ducts from the ill effects of direct sunlight.   Reduce heat absorption in the building structure.   Can be installed in new or existing building.

we are offering air curtains etc. heavy duty air curtains to form a efficient air barrier to prevent air, dust, flies, insect from entering a particular area even though the doors and fully open & vice-versa for preventing air conditioned air from escaping. these air curtains are available for door width 3', 3.5’, 4', 5' & for bigger door width multiple air curtains are fitted on the doors.

Ultra heavy duty industrial mancoolers for spot cooling in Hot work where workmen have to work in front of Hot Equipment/ Metals etc, where High Blast of Air or Long Throw of Air is required. Cast Aluminum Alloy Aerofoil Impellers. Size: 380 to 1200mm. Type: Pedestal / Wall mounting / Tubular. Effective Throw: 6 to 30 mtrs. A must for Foundries, Forge shops, Steel Plants, Glass Industries and Large workshops.

Suction diffusers are installed at the suction side of a pump in either a horizontal or vertical position. It is designed to remove any foreign matter or impurities that may be hazardous to the pump or other system components, which may also affect their performance, while providing proper flow conditions to the pump.

• Features: Non flammable, Non toxic, Stable properties
• Usage/Application: Air Conditioning
• Physical Form: Gas
• Packaging Type: Cylinder
• Packaging Size: 10 kg

Since this process works best at temperature around 25 Deg. C, a Chilling arrangement of suitable capacity is recommended.  

• Brand Name: GM
• Type: Thermostatic Panel
• Power Supply: 21-30V DC
• Power Consumption: Max. 360mW
• Current Consumption: Max. 12mA
• Auxiliary Supply Voltage: 21-30V,DC
• Auxiliary Power Consumption: Less Than 2W
• Operation Temperature Range: 5 Degree C-45 Degree C
• Storage Temperature Range: 25 Degree C-55 Degree C
• Transport Temperature Range: 25 Degree C-70 Degree C

NEX205 AHU Controller is a Dual Loop PID-cum-Logic Controller for intelligent humidity and temperature control. It can be used for hot water and chilled water valves, as well as with electrical heater banks, DX units for cooling, etc. Digital inputs allow monitoring of filters, AHU ON/OFF control, alarms for %RH, Temperature, DP, fire safety, etc. Relays can be used to activate hooters, or switch on or off external devices for alarms as well as monitoring purposes.

AC for All Seasons (Cools, Dehumidifies & Heats) Dual condensing system for high cooling 40% Less power Consumption over conventional AC Capable of running on DG sets / Inverters Easily Portable from One room to another Compatible for Shops, Terraces & Gardens No Drainage Required Unbreakable ABS Body Modular tiles free of cost Cools In Summers, Heats in winters Remote controlled easy operation Effective anti-bacteria filters on coil & condenser Works on auto evaporatertion systems (no drainage required ) Wheels for easy moment Quick operation Manoeuvrable for personal cooling 24 - hours timer with power saving mode

Course offers core curriculum covering with topics like fundamentals, cooling load & heat loss calculations, central heating system design, air distribution system design, chilled water system design, chilled water piping design, commercial ventilation system design, kitchen ventilation system design, VAV system design, equipment selection etc.

Chilled Shower is mandatory after Sauna and Steam bathing to get the most exhilarating experience. A Chilled water pressure bath rejuvenates the body after a hot sauna or steam bath. The water temperature maintained is 7°C to I 2°C. Hot Sauna or Steam open the pores of the skin and Chilled Shower cleans the skin & contracts the pores back to normal leaving behind a soft, smooth, clean skin and a refreshing feeling. Research indicates that chilled water bath provides muscle simulation and also enhances mental ability by reducing stress level.

Since this process works best at temperature around 25 Deg. C, a Chilling arrangement of suitable capacity is recommended.

Architectural uPVC louvers are featured prominently over the exterior façade of the building there by increasing the aesthetic value of the façade. COOLFin louvers are made from UV stabilized uPVC. They can be ordered to exact sizes and are packaged with the supporting members that will be installed on the building surface. uPVC is the material of choice in building projects all across the world with established advantages over other materials such as concrete, aluminum or steel. The design team at COOLDECK relentlessly strives to create and achieve an elegant aesthetic look with the uPVC louvers /fins to complement the overall design of the building.   Advantages Enhance architectural appeal of the building.   Allow significant amount of light in the building while reducing ill effects of direct heat   Create a visual block but yet allow passage of cool air there by reducing energy cost.   Inexpensive solution compared to alternate high quality materials.   Available in UV stabilized colors to match the other components of the facade   Project pipes and ducts from the ill effects of direct sunlight.   Reduce heat absorption in the building structure.   Can be installed in new or existing building.