Air Header Dealers in Mumbai

• Country of Origin: India
• Type: Air Headers
• Material: Carbon Steel, Stainless Steel

Air Header or Air Manifolds act as a distribution manifold that provides users with many connection options for isolation manifolds. Instrumxx offers Air Distribution Headers, which can be used with various outlet-take-off valves. This Air Distribution Header is a very efficient machine to replace many unit valve assemblies, operating from one source. Instrumxx Air Headers are available in a wide array of configurations based on end users requirements such as NPT, BSP, Butt Weld, Flanged, Socket Weld or Compression outlets. In the simplest terms, an air manifold allows you to connect multiple hoses to a central point on your worksite. It creates a junction box for using multiple tools on the same compressor without needing to run a separate line for each tool. There are various size manifolds equipped with multiple ports to run multiple tools. What are the advantages of an Air Header? They Offer Customized Compact design Multiple Valve inlets and Outlets save on Cost Variety of end connections Every Air Header is factory tested How Is It Used? It is a unit mainly used to distribute & control compressed Air from one Inlet to Multiple Outlets for use in plants or facilities. It is most commonly used for distribution of Instrument compressed Air within the plant for various utilities. Air HeaderSpecification Material of Construction (MOC): Stainless Steel, Carbon Steel, Hot Dip Galvanize Carbon Steel. Description Header Pipe: Air Header Pipe constructed from Seamless Pipe, size 1-1/2" & 2" NB schedule 40 and 80. Caps or Reducers welded to the pipe is manufactured from forge material. Inlet Connection: Flange or three piece union type connection. Outlet Connection: 4, 6, 8, 10, 12, 16, 18 or as per customer requirement. This outlet Connection are provided with IXX make Ball or Needle Valve of 1/4", 3/8", 1/2" sizes. Nipple used for all the above connections are manufactured from seamless pipe. Drain Connection: 1/2" or 1" Ball Valve ,Needle Valve, Gate Valve, Globe Valve as per customer requirement. Mounting: Bracket can be provide as option. Testing: Air Headers are tested at 150 PSI Pneumatically and 1000 PSI Hydraulically.  

Air Distribution Header finds extensive usage in outlet take-off valves. We are counted among the prime Manufacturers, Suppliers and Exporters of Air Distribution Header from Maharashtra. Our Air Distribution Header is manufactured in accordance with the ASTM standards. The Air Distribution Header that we offer is provided with threaded and flanged connection. It also has both inlet and outlet connections.

• Size: 1-1/2" | 2"
• Brand Name: IXX
• Material: Stainless Steel | Carbon Steel | Alloy Steel | Haste alloy | Duplex | Super Duplex | Monel | Inconel
• Condition: New
• Application: Gas Line | Oil & Gas | Instrumentation | Petrochemical
• Size: 1-1/2" | 2"
• Certification: ISO 9001:2008
• Packaging Type: HDPE BOX | Corrugated Box | Wooden Box
• Type: Air Headers
• Country of Origin: India
• Heating power: Best Quality

• Size: 15 nb to 300 nb

Available in all moc : c.s, ss 304, ss316, alloy steel etc sizes: 15 nb to 300 nb design: 2,3,4,5,6,,8,10,12,14,16,20 points end connection: screwed, & flanged ends pressure ration: class 150 to class 600.

• Inlet: DIN & ANSI ½” / 1” NB Flanged / Threaded Connections.
• Main Pipe: 1”, 1-½”, 2” NB SCH 40 / 80 / 160/ XXS, Seamless
• Outlet ports: 4way / 6way / 8way / 12way / 16way (Staggering or straight, Single sided or Double sided)
• Ports Size: ¼” - ½” NB SCH 40 / 80 / 160/ XXS Nipple TOE.
• Valves: Fitted on outlet ports ¼” / ½” SS or Brass or A 105 Needle Valves / SS Ball Valves  (Full or Reduced Port)
• Drain: ½” SCH SCH 40 / 80 / 160/ XXS Nipple TOE fitted with SS Ball Valve & Drain plug.
• Pressure Test: 150 psi. Pneumatic
• M.O.C: SS, CS, Alloy Steel, Monel etc.
• Mounting: Wall or Rack Mounting or ‘U’ clamps.

• Type: 8 Way & 16way
• Material: Steel
• Certification: ISO 9001:2008
• Application: Pharmaceutical Industries, Pneumatic Connections, Structure Pipe
• Weight: 200-300gm
• Finishing: Polished
• Warranty: 1year

Air headers have the ability to replace numerous unit valve fabrications that generally operate from one source. They can be aptly used with a range of outlet take off valves. In this arrangement, the connection of the inlet can be screwable or flange. It is also possible to create a drain valve at the air distribution manifold outlet. For wall mounting use, ‘U’ shaped clamp will be supplied.   Durable structure, sharp design and ease of installation are some features of air headers supplied by Mcneil Instruments. They are constructed from stainless steel or carbon steel. We ensure that each valve is thoroughly checked before shipment.   The compact design is the most valuable benefit of the stainless steel air header made by our organization. We have a prestigious clientele on a national and global level.

• Brand Name: Safe Power
• Material: Stainless Steel, Mild Steel
• Size: 1/2 - 2 Inch
• Packaging Type: Box
• Automation Grade: SS304, SS316
• Usage/Application: Instruments Fitting
• Working Temperature: Up To 100 Degree C
• Available Ways: 4 - 60 Ways Instruments

• Forged Fittings: Air Header

We are offering air header. we are offering air header. Air header can be flange- or screwable. A drain-valve is placed at the manifold exit. The air header is manufactured from the high technology parts as per the national and international quality standards. Robust construction of the air header ensures high performance with minimum maintenance. about air header robusthigh performanceexcellent qualitycompositional precisionsafesecured packagingeconomical suitable for use with a variety of outlet take-off valves supplied with for cs air headers distribution ports are provided with â¼" brass needle valvesfor ss316 / 304 air headers distribution ports are provided with â¼" ss 316 / 304â  needle / ball valvesfor mounting purpose ' u ' clamp is providedall npt threads are of ansi b 2.1 standardsocket weldâ  is of ansi b 16.11 standard.

ir Header or Air Manifolds act as a distribution manifolds that provides users with many connection options for isolation manifolds. We is one of the most reputed Air Manifolds Suppliers Introduction FAV Air Header are available in a wide array of configurations based on end users requirement such as NPT, BSP, Butt Weld, Flanged, Socket Weld or Compression outlets. Air Headers is a substitute for multiple valve assemblies, which normally operates from one originating point. The Air Manifolds are configured for accommodating various outlet valves. The inlet-connection can have variety of end connection. Accessories We supply all the air manifold valves along with Air Headers which include Instrument Valves including Ball valves and Needle valves, Tube Fittings, Couplings, Instrument Pipe Fitting or any other connections based on customers’ requirements.To understand our Needle Valve range click here .To understand our Ball Valve range click here . Standard Typical Specification Example FAV Air Header 10 Way Pipe : SS 316 Pipe ,SCH 80 ,2″ OD ,400 mm length Caps :SS 316 Pipe Cap,SCH 80 to be welded at both end Inlet : One Ball Valve of SS 316 Ball Valve,1/2″ NPTF connected Outlets: Ten SS 316 Ball Valve,1/2″ NPTF ,1000 psi  at each one Drain :1/2″ NPT Female Connection All the Red Color Variables are open to customization.

AIR HEADERS/ AIR DISTRIBUTION MANIFOLDS : WESMEC Brand Air Headers are specially designed for delivering air or utility to multiple take off points. These are custom manufactured as per client’s requirement for material, number of outlets and valve configurations. The WESMEC Air Header can be provided with mounting bracket.   FEATURES: • Available in a variety of end connections. • Various types of valves provided as per your requirement. • Bolting devices will be provided by us. • Various types of Coating used to avoid corrosion. • Designed as per ASME SEC VIII Div. I. • Fabrication and Welding as per ASME SEC IX. • Hydraulic Test Pressure: up to 40 Kg/Cm². • Pneumatic Test Pressure: up to 100 Kg/Cm². • Weld Joints are Argon welded by qualified welders. • WPS for approval are done as per Client's request. • NDT (Non Destructive Test) available on request. • Standards Followed: ASME B36.10/36.19/B16.9/B16.11, CE Marking. • Marking and Identification as per MSS-SP-25.   • Application: It is used for delivering multiple take offs.

• Size: 11/2" / 2" - SCH40 / SCH80
• M.O.C: SS316 / SS304 / CS
• Distribution Ports: Size -¼" / ½" , Ports - 6 / 8 / 10 / 12 / 16

We offer Air Headers that replace many unit valve assemblies that normally operate from one source. The Air Headers are suitable for use with a variety of outlet take-off valves. The inlet-connection can be screw-able. The drain-valve of the system is at the manifold exit and the manifolds can be supplied with a bracket or U clamp for ease of wall mounting.

We offer air headers that replace many unit valve assemblies that normally operate from one source. The air headers are suitable for use with a variety of outlet take-off valves. The inlet-connection can be screw-able. The drain-valve of the system is at the manifold exit and the manifolds can be supplied with a bracket or u clamp for ease of wall mounting.

These air headers replaces many unit valve assemblies, which would normally be operating from one source. The air headers are suitable for use with a variety of outlet take-off valves.

Shakti Forge Air Headers are fabricated as per customer requirement usingShakti Forge Ball / Needle Valves in Seamless Pipes or in Bar Stock, the Air Headers are used for Instrumentation or for Pneumatic applications. These Headers can also be used for lower Pressure Applications. They are available upto 2 x 12 outlets with equal spacing and are priced competitively. Materials used : SS316, SS304 & Carbon Steel

• Brand Name: EXCEL
• Material: As per customer’s Requirement
• Pressure: As per customer’s Requirement
• Country of Origin: India

We are engaged in manufacturing and exporting an extensive range of Air Headers to our valuable clients. Offered in varied sizes, these headers are offered withselector switches, condensing pots, gauge savers and melt bolts. Our range stands on international quality standards and is widely acclaimed for their easy installation, dimensional accuracy, chemical resistance, optimum performance, leakage proof nature and corrosion resistance nature.

We are the manufacturer of stainless steel 6 way air header 10 bar,14" end.

• Size: ¼” - ½” NB SCH 40 / 80 / 160/ XXS Nipple TOE

Air headers and distribution manifolds provide customers with many configurations for isolation manifolds. BAXCELL fabricates manifolds specifically to suit the customer's exact requirements.Weld joints are Argon welded as per ASME SEC IX by qualified welding personnel. All headers are 100% hydrostatically pneumatically tested at applicable pressures and also 2% samples are subjected to Dye Penetrant Testing. The following can be offered upon request.

• INDUSTRY: Refinery, Petrochemical & Fertilizer
• PROCESS: Horizontal Centrifugal Casting
• Feature: Heat Resistant

We are offering air headers are mainly used for air distribution and to several connections. It uses in refineries, liquid petroleum gas processing plant, petro-chemical plants, systems difficult to shut off due to solid contents dust, rust, dirt etc.

Air Header or Air Manifolds act as a distribution manifolds that provides users with many connection options for isolation manifolds. We offer Air Distribution Headers, which can be used with various outlet-take-off valves. This Air Distribution Header is a very efficient machine to replace many unit valve assemblies, operating from one source. This Air Distribution Header is provided with screw- able inlet connection FAV Air Header are available in a wide array of configurations based on end users requirement such as NPT, BSP, Butt Weld, Flanged, Socket Weld or Compression outlets. Air Headers are used to supply several users with instrument air. Besides multiple types of standard styles we also supply the Air Headers in accordance with specific customer demands.Selection can be made from a comprehensive range of pipe styles with a variety of connections and material options, optimizing installation and access opportunities.Air Headers is a substitute for multiple valve assemblies, which normally operates from one originating point. The Air Manifolds are configured for accommodating various outlet valves. The inlet-connection can have variety of end connection.We supply all the accessories along with Air Headers which include Instrument Valves including Ball valves and Needle valves, Tube Fittings, Couplings, Instrument Pipe Fitting or any other connections based on customers’ requirements. Air Header are fabricated from bar stock which are customized based on customers drawings. We also provide special coating like Zink coating; Hot dipped galvanizing coating, Epoxy coating, Silver coating.The most widely material used Air Header or Air Manifolds s are SS 316 Needle Valves .They is also available in Stainless Steel, Brass, Steel, Monel, High Duty Bronze, and Hastelloy FAV Air Header has been specifically designed for use on instrumentation, process and control systems, together with equipment employed in oil and gas, marine and shipping, chemical, chromatography, petroleum.