Air Meters Dealers in Mumbai

• Auxiliary Supply: 110, 240 V AC ± 20%, 50 Hz, 24 V DC
• Range: 4 – 20 mA DC

Ultrasonic wall-mounting Clamp-on Flow meter provides abundant capabilities for accurate liquid flow measurement from outside of a pipe.It utilizes best technology in ultrasonic transmissionreceiving, digital signal processing and transit-time measurement. The signal quality tracking and self-adapting technologies allow the system to optimally adapt to different pipe materials automatically.

The TMA10A is ideal for HVACR technicians measuring HeatVentila¬tionAir conditioning Refrigeration wind flow and temperature in resi¬dential, commercial and industrial air conditioning systems It offers numerous functions�use it to check air velocity FPM (Feet per minute), air volume (flow) CFM (Cubic feet per minute) plus the remote vane allows greater measurement loca¬tion flexibility Switch between °C and °F Input the area of airflow measurement to gain accurate air velocity results Measure an air flow source for a continuous mov¬ing average for up to two hours Determine minimum, maximum and average readings from a single point air source.

he thermal principle operates by observing the cooling effect of a gas flow as it passes over a heated transducer. In compressed air flow meter, the temperature sensor monitors the actual air temperature whilst the heater transducer is maintained a constant differential temperature by caring the required current to the heating sensor from electronic in order to maintain the differential temperature. Greater the flow, greater will be cooling effect and current required to maintain the differential temperature. The current produce to maintain this temperature differential is directly proportional to the mass flow rate. Hence there is no need for additional temperature or pressure compensation in the thermal mass flow meter. This makes thermal mass flow meters as a preferred choice for use in compressed air flow monitoring systems.

We work as authorized dealing point against VP Instruments, Netherlands and involved in offering Energy Management Solutions. If the energy is measured, it can be utilized meaningfully. These solutions helps in saving compressed air and industrial gases by revealing the cost of these gases and by providing monetary benefits to the clients. These solutions are used for measuring the demand and the actual consumption of energy used in plant. Pneumsys Advance Energy Solutions is specializes in offering various solutions for energy management, which includes :  

The Model AQH-20 Indoor Air Quality Meter reduces the number of instruments a contractor has to carry by measuring the carbon dioxide concentration, air temperature, and humidity percentage in one device. A large backlit LCD display shows all three parameters simultaneously. The Model AQH-20 can display dew point or wet bulb temperatures in place of the ambient temperature. Minimum, maximum, and average readings are easily accessible through the function buttons. By pressing the hold key, the current values are held so that they can be recorded. An audible alarm warns the user that the current ambient conditions are becoming hazardous. The Model AQH-20 includes a hard carrying case and batteries.

• Driven Type: Electric
• Operating Temperature: 0-55dig C For Continuous Use 0-100dig C Instantanceous Reading
• Air Velocity: 0.25-15 mtr/sec (Least Count: 0.01)
• Air Temperature: 0-100dig C
• Size Carry Case: 250 x 210 x 85mm
• Bettery: 2x9 Volts (6 F 22 Type)
• Extended Request: 50 mtr/sec,(Least Count: 0.1)
• Weight: Sensor 280 gms,Instrument 500gms

Keep your compressed air consumption in check: with the testo 6442 compressed air meter, you can carry out compressed air measurements in order to locate leaks.

• Material: Polycarbonate
• Color: White
• Power: 24vdc
• Features: Low Angular Dependence,Easy Installation,Adjustable To Application Requirements
• Brand: E+E
• Display Type: Not available
• Accuracy: +- (0.2 m/s (40 ft/min) + 3 % of m. v.)
• Range: 0 to 20 m/s
• Model Name/Number: EE650
• Process Temperature: -25 to 50 DegreeC

Used to determine air entrained in freshly mixed concrete by pressure method. Consist of a pressure tight flanged cylindrical measuring bowl of 0.005 / 0.01 / 0.1 cubic meter capacity for maximum size of aggregate 38 / 75 / 150 mm. Fitted with a removable flanged conical cover assembly with the help of a seal. The conical cover has an air valve and a petcock for bleeding off the water. A transparent cylindrical standpipe, which is graduated in air content, is fixed to the conical cover assembly. Pressure is applied to the specimen with the help of pressure bulb and the pressure is recorded on the pressure gauge, which is mounted on the standpipe. The whole assembly is mounted on a flat base. Each apparatus is supplied complete with a pressure bulb or air pump, Calibration Cylinder with spring clamp, Pressure Gauge, Funnel, Trowel and Tamping bar, Straight Edge, Rubber Mallet and Measure.

• Voltage: 18-30 V
• Features: Accurate,High efficiency,Outstanding performance
• Inside Nominal Diameter: 25 mm
• Temperature: -20 Degree C to +350 Degree C

Laminar Flow Bench- Clean Work Station for non dust working area. Unit comprising of HEPA / Pre dilter, Motor blowing assembly, Manometer, Tube Light. Horizontal & Vertical Models to meet requirement. 

Air Flow Meter, Sound Level Meters, pushpull meter, noise meter, lux meters

Air Velocity Meter, Sound Level Meter, Stroboscope, Tachometer

VA550 Flow Meter for Compressed Air and Gas, combustion gas analyzers

Air Velocity Transmitter, Dew Point Transmitter

airvelocity meter, Push Pull Meter, Vibration Meter, light meter, Lux Meter