Air Receivers Dealers in Mulund, Mumbai

Compressed Air Receivers plays very important role in compressed air system with multi purposes by value of its design and rightly selected. Compressed Air Receivers or Air pressure Vessel also enhance the service life of compressor. The receiver tank acts as a reservoir of compressed air for peak demands. The receiver tank will help remove water from the system by allowing the air a chance to cool. The receiver tank minimizes pulsation in the system caused by a reciprocating compressor or a cyclic process downstream.  

Bladder tanks are usually supplied in one of two configurations and are used to reduce pressure surges in pipelines. The air charge is contained within the bladder inside the tank. The air charge does not come into contact with the liquid in the tank and so cannot be absorbed. Air charge losses due to absorption are therefore not possibel as they have been eliminated. The pumped liquid from the main flows into and out of the main tank, it will come into contact with the tank walls and so compatible materials must be selected. The bladder is often made from a highly elastic rubber, such as butyl rubber, and may be sized to expand to fit the entire vessel. The bladder will typically be pre-charged at installation with a pre-determined pressure to give the correct operating level in the tank when the unit is connected to the main and at the operating pressure. There must be an anti extrusion plate fixed at the outlet from the vessel to prevent the bladder from being drawn into the main at low pressures. The anti-extrusion plate and inlet size must be selected so that they do not impose a restriction on the flow into and out of the vessel, otherwise the unit will not function correctly as a surge tank. Each bladder vessel comes with these standard features: Safety relief valve Pressure gauge Air fill valve Anti-extrusion plate Drain connection Internal bladder (membrane)

Project Name : M/s. Bharat Petroleum Corporation Limited (Mahul).   300 KL High pressure Air Receiver.

Air compressor tanks, Air Handling Unit, air flow systems

• Material: Mild Steel
• Shape: Round
• Application: Air Storage
• Warranty: 1year
• Tank Orientation: Horizontal
• Finishing: Polished

1) Horizontal & vertical version 2) Designed as per IS2062 3) Horizontal & Vertical Receiver as per following size.