Air Valve Dealers in Mumbai

The company shares glorious credentials with the leading Suppliers of Air Wafer Type Non Return Valve and offers the best deal. As we remain much concerned about the safety of the products, we store the entire lot in our capacious warehousing unit under secured environment and expert's supervision.   Details : Spring closing arrangement for the prevention of reverse flow in pipelines. These valves are general-purpose valves that are stronger, lighter and smaller than conventional swing check valves and   therefore, less expensive to install and maintain. Suitable for higher pressure/temperature (up to 400*C) Compact Design for simple installation between wide ranges of flange types. It can be mounted in any plane/direction. Extremely low opening pressures. Available sizes 15mm to 100mm, suitable for PN6-PN40 and ANSI 150/300. Weight and Dimension are same for class 150 & class 300 valves. Valves are self-centering type. Zero leakage for soft seated valves. The maximum permissible leakage rate shall be 3 cubic centimeters per inch of nominal pipe size for metal-seated valves. Testing - As per API 598 Design - As per manufacturers standard.   Material of Construction : Body : AISI 316, WCB. Disc :   AISI 316 Spring : Standard AISI 316 Spring Nimonic - for high temperature up to 400c Disc Seat - Standard, EPDM/Nitrile, Soft seated-for water-silicon/viton soft disc seating face - for oil & gases.   General Construction : Metal to Metal seated Construction Soft seated (EPDM/Nitrile/ Silicon/viton) construction.   Pressure Rating : PN 40   Flange Standard : BS 10 Table D, E *& H DIN: PN6, 10 16, 25, 40 ANSI 150 and 300   Operation :  Non Slam Check Valves are opened by the pressure of the fluid and closed by the spring as soon as flow ceases and before reverse flow occurs.   Installation : Non Slam check valves simply fit between two pipe flanges  Standard gaskets are used on either side of the valve together with longer bolts or studs.

Our air release valves are, carefully designed by the experts, keeping the varied requirements of the clients. We can also customize these air release valves as per the definite requirements of our clients. features : easily disassembled forcleaningreplacing internal partslightweight for easy transport & installationself-cleaninggreater air flow ratesdurablepatented float designmechanism of a rolling sealrequire less maintenance widely used in : parking placesgo-downs and warehousesofficial buildingslifts and elevatorsresidential building

• Usage: Fire Fighting
• Size: 3/4 inch, 1 inch
• MODEL NO: NSS-FFEA-1728
• Product Category: Fire Fighting Equipment & Accessories
• Feature: Lightweight for easy transport and installation , Longer life and less maintenance, Easily disassembled for cleaning and replacing internal parts.

Compact combination design, face to face dimensions. Material Construction: Body: Cast Iron, Ductile Iron, Seat: Stainless Steel, Bracket: Stainless Steel, Lever: Stainless Steel, Piston: Rubber, Floating Ball: Stainless Steel, Bolts: Galvanized Steel.

We deals in supplying of wide range of Air Release Valves.

A] Air Compressor - Spare Parts 1] INGERSOLL-RAND :- [ IR- T-30 SS NL LPG Series ] 2] INGERSOLL-RAND :- [IR- ESV ESH IHE PHE LLE HSE XLE- Series ] 3] ELGI Compressors : - [ ELGI- SC TC THPC HV SS TS HP Series ] B] Other Air Compressors- Spare Parts 1] FOUJI :- [ FOUJI- MB SMB FI FID MBD ] 2] AIR-MARSHAL :- [AIR- MARSHAL- GC-305V , GC-294 , GC-7150 , GC-2595 ] 3] BOSS :- [ BOSS- MB SS SD ST TD TT HT HP ] 4] INDO-AIR :- [INDO-AIR- IA IAV ] 5] JK PNEUM :- [JK PNEUM- 25S , 50S , 75L , 100L , 75H , 150H ] 6] PARKEEN :- [ PARKEEN- SA SB SF SS SV TCA TCB TCI TCK ] 7] PNEUMECH :- [ PNEUMECH- PM PMF ] 8] ZEN AIR :- [ ZEN- 75H 150HH 75L 125L 25S 50S ] C] Screw Compressor - Spare Parts 1] Ingersoll-Rand ELGI Atlas - Copco CP Kirloskar Khosla Kaser Sullair Boge D] Refrigeration Chilling Compressor - Spare Parts 1] Accel Sabroe Carrier Voltas Grasso Kirloskar Stal Thermoking Trane Vilter All the Models Refrigeration Chilling Compressor Spare Parts E] Marine Compressor - Spare Parts 1] Sperre Tanabe Hatlapa Hamworthy All the Models Marine Compressor Spare Parts We do Export our product to Asian countries, Middle East, America, Canada, Europe etc. Countries. We aim to explore new avenues and conquer new frontiers.

Pneumatic Air Valve the best quality in the business and are requested by our clients for their entire dependability. Our experts guarantee the most favoured nature of the crude items for the assembling for these shills. We have a wide accumulation of our shills, which is accessible at sensible costs.

• Size: Available in Different Sizes
• Material: Plastic
• Color: White
• Feature: Durable
• Pattern: Plain
• Pressure: High Pressure, Low Pressure, Medium Pressure

We involved in importing and supply of international quality standard Air Pressure Needle Valve. For fabricating these valves, we use top grade material, which is procured by us from the reliable sources. These high performance Air Pressure Needle Valve can be availed from us according to clients' specifications and demands. 

• Material: Metal
• Brand Name: Kcass, Aarpee
• Size: 1.1/4inch
• Pattern: Plain
• Feature: Durable
• Connection: Threded

The evaporative air cooler auto drain valve has an operational voltage of 220-250V. As a known name, we ensure safe and timely delivery of the orders at any desired Maharashtra(India). The company shares glorious credentials with the eminent Suppliers of Air Cooler Auto Drain Valve and offers the best deals.

• RANGE: 0.1 to 0.3 mm.

Rotary Airlock Valve (RAV) is the equipment which is fitted below the Bag Filter, Cyclone, Multicyclone etc. The main function of the RAV is to lock the air and discharge the dust powder. In the Bag Filter system there is negative pressure in the Bag Filter. So at the powder discharge point if there is any air leakage the powder will not fall down. So to restrict the leakage we provide the Rotary Airlock Valve. RAV consists of a stator & rotor. The radial & axial clearance is between 0.1 to 0.3 mm. The rotor has vanes (6 or 8) welded on the shaft. The rotor is mounted on the bearings at both the ends of the stator. A Geared Motor is provided to rotate the rotor. Since the clearance between rotor & stator is so low. Because of this air leak is very minimum and it delivers only powder.

Air disc valveAir disc valveAir disc valveAir disc valveCOSMOS” Non‐return Pressure relief Gravity Back draft dampers have been specifically designed for use in Air‐conditioning and Ventilation system, these dampers are air operated and are used for air intake and exhaust, and are also used for pressure relief. Non‐return Gravity Back draft dampers can either be operated by gravity (where pressure or velocity opens and closes the damper) or be motorized to open and close when required. These dampers are composed of a set of horizontally mounted blades, they are normally closed and are free to rotate about the horizontal axis. The blades are manufactured from light weight aluminum sheets. Frame is manufactured from high quality aluminum as well as from galvanized steel.

Since the lifetime of a reciprocating compressor depends essentially on the life time of the wear and tears parts, the selection of optimal materials and the development of innovative materials is one of Hoerbiger core competencies, Hoerbiger Valve plates are used in a wide range of compressor applications across different gas compositions and operating temperatures, acting as seals between different pressure zones within the compressor. They open when differential pressures between zones are reached and allow gases to flow from high to low pressure regions during the compression cycle.

• Application: Air Releasing
• Feature: Casting Approved, Durable

We are among the trusted names, involved in offering world-class lot of Air Compressor Safety Valve in the national market. We are acknowledged for entertaining voluminous orders at a time as we are supported by streamlined inventory management system and capacious storage facility. Features : Cost effective Resistance to corrosion High durability

• Weight: 0-500 g
• Material: Mild Iron, Fibre, Plastic, Stainless Steel
• Usage: Water, Air
• Colour: Black, White, Silver, Blue
• Size: 0-1000 MM, 1000-2000 MM
• Size: 0-10 Inch, 10-20 Inch

• Color: Black
• Country of Origin: Made in India
• Surface Finish: Powder Coated
• Packaging Type: Box
• Usage/Application: Compressor
• Size: Any
• Weight: 2 Kg

Application: For use when an air pilot signal is required at a set hydraulic pressure. Can be used to shift valves, and start or stop pneumatic pumps. Attaches directly to control manifold or can be mounted “in-line” to read system hydraulic pressure. Automatically turns on an air pilot signal when a predetermined system pressure is reached. Has 1/4" NPTF male thread and 1/4" NPTF fitting for gauge mounting if required. Adjustable from 500-10,000 psi. Maximum rating of 25 scfm at 100 psi.  

• Media: Air
• Coil Voltage (volt): 12V
• Body Material: Aluminium and Brass
• Internals Material: Aluminium
• Seals Material: Standard Nitrile and Viton
• Voltage Tolerance: AC +/-10%

Features and Specifications Compact design. Manufactured from high performance rigid PVC compound. Excellent chemical & corrosion resistance. Large orifice opening facilitates easy expulsion of air and breaking the vacuum. Light weight. Maximum working pressure 6 kg/cm²(85 psi). Available in ½”, ¾” and 1” BSP male threaded, BSP Female threaded & compression type connection option. Application Recommended in micro/drip irrigation systems as a safety valve to remove entrapped air and to break the vacuum in the system

• Usage/Application: High Pressure Safety
• Country of Origin: Made in India
• Compressor Type: Reciprocating Compressor
• Air Compressor Model: All models
• Brand: ELGI/IR/Equivalent
• Spare Type: Compressor Spare
• Polishing: Brass Body

the varie av21 can be used..  at top of wet riser of fire fighting systems. at ends of vertical uptake line (top) of hydro- pneumatic systems. in hvac lines wherever air needs to be removed automatically without wasting chilled water into the drain. other applications wherever water (liquid) is present in a pressurized system and air needs to be removed without wasting hot / cold water. in hot water (solar) systems.   salient features   the varie av21 uses a low - density solid plastic float (and not hollow) thus eliminating failure of float. Other conventional air vent valves use a hollow metallic ball float which develops pin holes or leakages from the welding joint and becomes heavy (due to water that enters the float). The valve thus remains in open position permanently. simple design with minimal parts makes it virtually maintenance free. has built-in filter which prevents ingress of dirt & foreign particles, which are the main culprits for choking with malfunction. light weight. transparent chamber in av21-t shows visual indication of water level to determine if valve is malfunctioning. av21-t (transparent) comes with a protecting sun cap to avoid moss / algae formation inside due to sunlight.

We Are The Manufacturer And Supplier Of Air, Steam Vents & Drains Which Have The Following Models: Teleflo Air Vent/Release Valves, Teleflo Moisture Eliminators, Teleflo Float Traps And Condensate Drain Valves.Teleflo air vent valves or air release valves are mounted on piplines to remove entrained air in water or liquid pipelines and sewerage lines. These valves are available in single float and double float design.APPLICATION: Air that is entrained in a flowing liquid will naturally rise and tend to collect at high points within the system. This accumulation of air adds resistance to the liquid flow and can, under certain conditions, completely block the flow. However, the most common phenomenon is increased line resistance, requiring the pump to work harder, resulting in an increased energy consumption. Such a situation can continue unnoticed for a long time adding to the cost of operation. TElEFLO Air Release Valves or Air Vent Valves automatically exhaust these small amounts of air which collect at system high points, while the system is flowing and under pressure. This ensures the system will remain free of trapped air pockets, thereby increasing the efficiency and decreasing the overall operating cost of the system. In operation, these valves are installed at high points in the system where air would naturally tend to collect. Air bubbles  entering the valve will displace the liquid within the valve and lower the liquid level. When the level drops to where it no longer buoys the float, the float drops. This motion pulls the seat away from the orifice, opening the air vent valve and allows the air that has accumulated in the upper portion of the air vent valve to be exhausted to atmosphere. As the air is exhausted, liquid re-enters the air vent valve, once again buoying the float, lifting it until the seat presses against the orifice, closing the valve. This cycle automatically repeats as often as necessary to maintain an air free system. Applications of Teleflo  Vent Valves : Air Release Valves are installed on water transmission lines and sewage force mains, at or slightly downstream of peaks and high points, often as part of a "Combination Air Vent Valve"