Aluminium Alloy Bar Dealers in Bhuleshwar, Mumbai

• 1000 MM TO 1500 MM: 0.5mm to 500mm Diameter
• 100 to 6000mm length: PN0.25---PN42Ma
• 26mm to 63mm: Bright, Polish & Black

GAUTAM TUBES are one of the leading stockists of Aluminium Alloy Round, Hex, Flat & Square Bars. These Aluminium Alloy Round, Hex, Flat & Square Bars are manufactured in various range and grades of of Aluminium Alloy such as 2014, 2024, 2017, 2011, 5083, 6061, 6082, 7075, 7001, 7045, 7050, 3003 etc. as per the International Standards. To keep the customer fulfilled, we exchange, wholesale and supply an unrivaled quality scope of Aluminum Alloy Round, Hex, Flat and Square Bars that is generally acclaimed in different building commercial ventures. Under the supervision of our veteran obtaining operators, the offered Aluminum Alloy Round, Hex, Flat and Square Bars are sourced from real sellers of the business sector. Keeping in mind the end goal to guarantee their premium quality, the offered Aluminum Alloy Round, Hex, Flat and Square Bars are thoroughly checked against different quality parameters. According to the particular prerequisites of our profitable customers, we give these Aluminum Alloy Round, Hex, Flat and Square Bars in different sizes and determination

• Material: Aluminum
• Shape: Round
• Length: 12 ft
• Is It Anodised: Anodised
• Rust Proof: Yes
• Customization: Yes

We are offering aluminium alloy round bar, 6061, 7075, 2024 chemical composition chemical composition limits for aluminum alloys composition in percent by weight according to the aluminum association. The values associates maximum limits unless shown as a range or a minumum. alloy si fe cu mn mg cr zn ti others each others total al. Min. 6061 0.40-0.8 0.7 0.15-0.40 0.15 0.8-1.2 0.04-0.35 0.25 0.15 0.05 0.15 rem. 7075 0.40 0.50 1.2-2.0 0.30 2.1-2.9 0.18-0.28 5.1-6.1 0.20 0.05 0.15 rem. 2024 0.50 0.50 3.8-4.9 0.30-0.9 1.2-1.8 0.10 0.25 0.15 0.05 0.15 rem. 6061, 7075, 2024 mechanical properties typical mechanical properties the following typical properties are not guaranteed since most cases they are averages for various sizes and methods of manufacture and may not be exactly representative of any particular product or size. The data is intended for comparing alloys and tempers and should not be used for design purposes. tensile strength yield strength elongation (%) for the following gauge ranges: tensile strength yield strength elongation (%) for the following gauge ranges: alloy temper (ksi) (ksi) 0.010-0.050 0.051-.125 (mpa) (mpa) 0.25-1.25mm 1.26-3.0mm 6061 o 18 8 25 26 124.1 55.2 25 26 t4 35 21 22 24 241.3 144.8 22 24 t6 45 40 12 17 310.3 275.8 12 17 7075 o 33 15 16 18 227.5 103.4 16 18 t6 83 73 11 12 572.3 503.3 11 12 2024 o 27 11 18 20 186.2 75.8 18 20 t3 70 50 16 18 482.6 344.7 16 18 t4 68 47 20 19 468.8 324.1 20.

• Chemical Element: % Present
• Silicon (Si): 0.0 - 0.12
• Iron (Fe): C0.0 - 0.15
• Copper (Cu): 2.00 - 2.60
• Manganese (Mn): 0.0 - 0.10
• Magnesium (Mg): 1.90 - 2.60
• Chromium (Cr): 0.0 - 0.04
• Zinc (Zn)): 5.70 - 6.70
• Zirconium (Zr): 0.08 - 0.15
• Titanium (Ti): 0.0 - 0.06
• Other (Each): 0.0 - 0.05
• Others (Total): 0.0 - 0.15
• Aluminium (Al): Balance

Backed by a team of expeditious and hardworking procuring agents, we Neon Alloys are affianced in Manufacturing & Exporting a wide range of Aluminium Round Bar, which are used in various industrial applications. Our offered aluminium round bars are precisely manufactured using top notch material by our experts following the set standards of industry.

• Manufacturer: Parmanu Dhatu Nigam
• Manufacturer Brand: Padhni
• Metal-Alloy: Alloy
• Product Name: Aerospace Aluminium Alloy Bar
• Padhni Grade: Aerospace Aluminium Alloy
• Aerospace Aluminium Alloy Shape: Flat Hexagonal Rectangular Rod Round Square
• Size Diameter: 1MM - 3000MM
• Size Length: 1000MM - 12000MM

• Manufacturer: Parmanu Dhatu Nigam
• Manufacturer Brand: Padhni
• Product Name: Aluminium Alloy 1050 Bar
• Padhni Grade: Aluminium Alloy 1050
• Aluminium Alloy 1050 Shape: Flat Hexagonal Rectangular Rod Round Square
• Size Diameter: 1MM - 3000MM
• Size Length: 1000MM - 12000MM

• Material: Aluminum
• Shape: Square, Round, Rectangular etc.
• Color: Silver
• Features: Impact resistance finish, High tensile strength, Durability .
• Weight: 50kg
• Temperature: 840-880 Degree C
• Dimensions (l x b x h): 10 X 10 X 15
• Anodised: Yes

• Material: Alloy Steel
• Application: Construction
• Shape: Round
• Surface Finish: Polished

• Type: Aluminium Alloy Bar
• Material: Aluminium
• Shape: Rectangular, Round, Square
• Thickness: 1-100mm, 100-200mm, 200-300mm, 300-400mm, 400-500mm
• Certification: ISO 9001:2008 Certified
• Length: 1-1000mm, 1000-2000mm, 2000-3000mm, 3000-4000mm, 4000-5000mm
• Application: Construction, High Way, Industry, Subway, Tunnel
• Color: Grey, Silver
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing, Flawless Finish, High Quality, High Strength, Perfect Shape, Sturdy Design
• Technics: Cold Drawn, Forged, Hot Rolled
• Width: 1-50mm, 100-150mm, 150-200mm, 200-250mm, 50-100mm
• Dimension: 1-500mm, 1000-1500mm, 1500-2000mm, 2000-2500mm, 500-1000mm
• Brand Name: JINDAL, HINDALCO & IMPORTED
• Grade: 1000,2000,3000,4000,5000,6000,7000,8000 SERIES & ALCLADED
• Temper: T1 TO T10
• Steel Grade: 1000,2000,3000,4000,5000,6000,7000,8000 SERIES

• Material: Aluminium
• Shape: Round
• Length: Upto 15 m
• Color: Grey
• Technics: Forged
• Brand Name: Radiant
• Surface Treatment: Anodized

Typical Applications Include : Rolling element bearings Valve seats High-quality knife blades Surgical instruments Chisels

We are offering Build strong relationships with our customers � which we achieve, for example, by employing and training local workforces.Develop trust in our reliability and integrity � which we are reinforcing, for instance, by developing a global compliance network.Manage risks more effectively � as we do with the social and environmental impact asessments that we carry out in all geographies.establish strong employee engagement.

• Grade: Aluminium Alloy 2024, 2014, 2A14, 2A50, 3003, 4032, 5052, 5056, 5082, 5083, 5754 , 6060, 6061, 6063
• Length: 100mm to 6000mm
• Temper: F, O, R, T4, T5,T6,T651,T731, H, etc
• Range: 5mm to 350mm Dia
• Form: Square
• Finish: Cold drawn condition and Belt polished condition

Aluminium Alloy 2014 Square Bar Manufacturer, Aluminium Alloy 7083, Aluminium Alloy 2024 Rods Supplier, Aluminium Alloy 7075 Square Bars & Rods ExporterAluminium 6061 Square Bars, Aluminium 5083 Square Bars & Rods Exporter, Aluminium Alloy 6082 Square Bars & Rods in Mumbai, Aluminium Alloy Square Bars & Rods in India.Aluminum Square Bar (Rod) is availble in different compounds offering a scope of weldability, corrosion protection and machinability. High quality Aluminum Round Rod can be utilized as a part of aviation applications, and high corrosion protection aluminum alloy round bars are ordinarily utilized as a part of marine applications. Aluminum Round Rod might be cold completed or expelled. Aluminum round bar is offered in a range of alloys, ranging from the standard 6061 alloy popular across a range of applications, to the more specialized 6063, 2011, 2024, 6101 and 7075 alloys. These alloys offer a range of corrosion resistance, strength, weldability and conductivity, with uses across many applications and industries. Our round bar is available as in a cold finished or extruded form. These are open to our profitable clients in various scope of distances across, divider thicknesses and sizes at very moderate rates. Ellite Alloys Supplies Stainless Steel 410 Square Bars & Rods in Agartala, Agra, Agra Rampur, Ahmedabad, Aizawl, Ajmer, Aligarh, Allahabad, Alwar, Amaravati, Ambala, Ambattur, Ambernath, Amravati, Amritsar, Aurangabad, Bangalore, Bareilly, Belgaum, Bhagalpur, Bhavnagar, Bhilai, Bhiwandi, Bhopal, Bhubaneswar, Bidhannagar, Biharsharif, Bikaner, Bilaspur, Bokaro, Chandigarh, Chennai, Chittoor, Coimbatore, Cuttack, Dahod, Davanegere, Dehradun, Delhi, Dhanbad, Dharamsala, Dindigul, Diu, Durgapur, Erode, Faridabad, Fatehpur, Gandhidham, Gandhinagar, Ghaziabad, Greater Hyderabad, Greater Mumbai, Greater Warangal, Gurgaon, Guwahati, Gwalior, Haldia, Howrah, Hubballi-Dharwad, Hyderabad, Imphal, Indore, Jabalpur, Jaipur, Jalandhar, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kakinada, Kalyan-Dombivali, Kanpur, Karnal, Kavaratti, Kochi, Kohima, Kolhapur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Mehsana, Mangalore, Mangaluru, Mira-Bhayandar, Moradabad, Morbi, Mumbai, Muzaffarpur, Mysore, Nagpur, Namchi, Nasik, Navi Mumbai, NDMC, Nellore, New Delhi, New Town Kolkata, Noida, Oulgaret, Pali, Panaji, Panipat, Panvel, Pasighat, Patiala, Patna, Pimpri-Chinchwad, Port Blair, Puducherry, Pune, Raipur, Rajkot, Ranchi, Raurkela, Industrial Township, Rourkela, Sagar, Salem, Satna, Secunderabad, Shaharanpur, Shillong, Siliguri, Silvassa, Solapur, Srinagar, Surat, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirapalli, Tirunelveli, Tirupur, Tumkur, Udaipur, Ujjain, Ulhasnagar, Vadodara, Vapi, Varanasi, Vasai-Virar, Vellore, Vishakhapatnam.Ellite Alloys exports Stainless Steel 410 Square Bars & Rods to Countries like India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Stainless Steel 410geria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Stainless Steel 410geria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia.

Lm 4 Aluminum Alloy Bar, Brass Pipes, Brass Rod, Brass sheet, Copper Rods

• Length: 100mm to 6000mm
• Grade: 2A12,1214, 2024, 2014, 2A14, 2A50, 3003, 4032, 5052, 5056, 5082, 5083, 5754 , 6060, 6061, 6063, 6005
• Temper: F, O, R, T4, T5,T6,T651,T731, H, etc
• Range: 5mm to 350mm Dia
• Finish: Bright, Polish & Black
• Form: Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

We vision Alloys are affianced in Manufacturing and Exporting an extensive variety of Aluminum Round Bar, Aluminium HE30 Round Bar, Aluminium Alloy 2014, 2024, 5083, 6061, 6082, 7075 Round Bars & Rods which is utilized as a part of different modern applications. Our offered aluminum round bars are accurately produced utilizing first class material by our specialists taking after the set measures of an industry. This arrangement is appropriately examined by our quality specialists on the premise of very much characterized parameters before conveying at the customer's end. Our aluminum bars are light in weight with high-quality to-weight proportion. Our Aluminum round bars and poles are known for its Good machinability, particularly free-cutting qualities, great mechanical properties, excellent surface and complete ability. Aluminum Round bars and bars are utilized broadly in Aircraft fittings, apparatuses, and shafts, intertwine parts, meter shafts, and riggings, rocket parts, directing valve parts, worm gears, keys, flying machine, aviation and protection applications; bicycle outlines, off-road vehicle (ATV) sprockets and so on. Aluminium Alloy 6063 Rods, Aluminium 6082 Round Bars, Aluminium HE30 Round Bar, Aluminium 6061 Round Rods, Aluminium Alloy 6061 Hexagonal Bars, Aluminium 6063 Bright Bars Supplier & 6061 Bars Exporter in India. We are fabricated these products according to the national and global quality norms. These Aluminium Alloy Round Bars & Rods accessible in different evaluations, for example, 5083, 6061, 6063, 2014, 2024, 7075, Etc. Grade Aluminium 2A12,1214, 2024, 2014, 2A14, 2A50, 3003, 4032, 5052, 5056, 5082, 5083, 5754 , 6060, 6061, 6063, 6005, 6082, 6A02, 7005, 7A04,7075,7A09, K70, G77, AHS , 19000, 19500, 19501, 19600, 19700, etc Diameter 25 mm - 510 mm Thickness 5 mm - 25 mm Type Round, Hexagonal, Square, Rectangular, Flat Finish Bright, Black, Polish, Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh Vision Alloys are gifted to offer an overwhelming extent of Aluminium HE30 Round Bar, Aluminum-Alloy Round Bars and Rods which is perceived as uncommon quality and strong nature. Our item is used in the business. Convenient craftsmen use the finest quality material and impelled techniques to manufacture these items at industry guidelines. These are open in different assurance and estimations as per the client's necessities. These are by and large used as a piece of various application industries, for instance, oil and gas, compound industry, passing on water and different liquids and so on. We offer to our clients at comprehensive extent of Aluminum-Alloy Round Bars and Rods at to great degree sensible costs.

• Type: Bar
• Size: As Per Requirement
• Is It Anodised: Anodised
• I deal in: New Only
• Packing Details: Shrink Wrapping, Jute Wrapping, Wooden Boxes etc

• Material: Aluminum
• Shape: Round
• Length: 12 Ft
• Brand Name: Hindalgo,Balco,Jindal,Imp
• Dimensions: 1/

• Sizes: Rounds .125 to 8.00

Aluminium alloys (or aluminum alloys; see spelling differences) are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is Al–Si, where the high levels of silicon (4.0–13%) contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required.