Aluminium Alloys Dealers in Kumbharwada, Mumbai

Sheet 6082(T651), Aluminium Alloy Plate Sheet 5052, Aluminium Alloy Plate Sheet 6061 T651, Aluminium Alloy Plate Sheet 5086, Aluminium Alloy Plate Sheet 3003-h14, Aluminium Sheet And Plate 2024, Aluminium Alloy Plate Sheet 1050 '0' (Soft), Aluminium Alloy Plate Sheet 2014, Aluminium Alloy Plate Sheet 5251 - H24, 2024 Aluminium Alloy Plate Sheet And Plate Aluminium alloy 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the tempered condition, it is strong, and retains good formability due to excellent ductility. 5083 has high resistance to corrosion, and is used in marine applications. It has the low density and excellent thermal conductivity common to all aluminium alloys. Typical Applications require a weldable alloy of high to moderate strength, with good corrosion resistance. Marine applications, unfired welded pressure vessels, TV towers, drilling rigs, transportation equipment, armour plate. Description Aluminium 5083 is a strong magnesium-manganese-chromium-aluminium alloy. It can be hardened by cold work, but is not heat treatable to higher strength. It has good ductility for the strength level, better than most other 5000 series alloys (see figure). Corrosion Resistance Alloy 5083 has excellent resistance to general corrosion, and is used in marine applications. Resistance is excellent in aqueous solutions in the pH range 4 – 9. The corrosion resistance of aluminium alloys relies on a protective surface oxide film, which when damaged is readily repaired by the rapid reaction between aluminium and oxygen. However, the high reactivity of the base metal can give rapid corrosion if the film cannot be repaired, so aluminium alloys are not suitable for use with reducing media. Alloy 5083 can be anodised to improve the corrosion resistance by thickening the protective surface film. Alloy 5083 can be susceptible to exfoliation corrosion in severe applications. Material in the H116 temper is least susceptible, and passes the ASTM G66 Exfoliation Susceptibility Test (ASSET Test). AS 1734 suggests alloy 5083 should not be used above 65°C. Pressure Vessels AS1210 Pressure Vessels prequalifies alloy 5083 for pressure service for temperatures up to 65°C in the O, H112 & H321 tempers.

• Material: Aluminium
• Grade: 1000 Series, 2000 Series, 3000 Series, 4000 Series
• Thickness: .2mm to 100mm
• Surface Treatment: Coated

• Brand Name: HIndalco/jindal
• Shape: Round
• Size: 10-300 mm
• Weight: As per size
• Material: New
• Material Grade: 2014

Aluminium alloys (or aluminum alloys; see spelling differences) are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is Al–Si, where the high levels of silicon (4.0–13%) contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required.

• Brand Name: Maxell Steel & Alloys
• Country of Origin: Mumbai  
• Feature: Sturdy construction, accurate dimensions and high durability
• Grade: Different
• Length: Various
• Packaging: Bulk

We are one-step ahead of our competitors in offering a wide range of Aluminum Alloy Grades. These are widely demanded by clients owing to its various salient features including sturdy construction, accurate dimensions and high durability. Following the exact demands of clients, we provide these Aluminum Alloy Grades in various lengths, grades, weights and other specifications. Our products are available at reasonable rates. Features: Reliability Sturdy construction High functional efficiency

We are engaged in providing Aluminium Alloys to the clients. The Aluminium Alloys are made of high quality Aluminium. These Aluminium Alloys are demanded in varied industries for different purposes all over the world. We make our Aluminium Alloys available in different materials, shapes, grades and specifications. Additionally, these Aluminum Alloys are economically priced.

• Width: 1200 - 1500 mm
• Length: 2500
• Condition: Hot rolled

We are offering aluminium alloys. In form of sheet, plates, structural, round bars, pipes & tubes, flat bars, square bars. Alumac. Mic-6 in sheets, plates, extrusions & forgings. in almost all possible grades & temper. u.s.a. (a.a.) 1050(e.c.), 1050, 1060, 1070, 1080, 1100, 2011, 2014, 2017, 2024, 2030, 2618, 3003, 3004, 3005, 4043, 4047, 5005, 5051, 5052, 5086, 5083, 5056, 5454, 5754, 6061, 6063, 6351, 6082, 6066, 6005, 6101, 6201, 7020, 7039, 7075, 8011.

• Brand Name: HINDALCO

Authorised stockist of hindalco industries ltd. We are suppliers of aluminium round rod in 6082 t6 6351 t6 6063t6 alloys & temper.

• Material: ALUMINIUM ALLOY

We are the leading supplier of this products.

Pure aluminium is soft and ductile and most commercial uses require greater strength than pure aluminium affords. So strength is achieved by the addition of other elements to produce alloys. Further strengthening is possible by means which classify the alloys roughly into two categories, non-heat-treatable and heat treatable.

Purchasers will not be disappointed buying our range of product, as it adheres to industrial quality regulation systems. Our company guarantees to make delivery of bulk as well as retail orders of the product within the mutually decided timeframe.   Aluminium Alloy and Its Importance :Pure aluminium is soft and ductile and most commercial uses require greater strength than pure aluminium affords. So strength is achieved by the addition of other elements to produce alloys. Further strengthening is possible by means which classify the alloys roughly into two categories, non-heat-treatable and heat treatable.Non-heat-treatable Alloys :The strength of alloys in this group depends upon the hardening effect of elements such as manganese, silicon, iron and magnesium. Since these alloys are work-hardenable, strength levels are controlled by various degrees of cold working, denoted by the ‘H’ series of tempers. Alloys containing appreciable amounts of magnesium when supplied in strain-hardened tempers are usually given a final elevated-temperature treatment called stabilizing to ensure stability of propertiesAluminium Alloy and Its Importance : Aluminium Sheet Aluminium Bar Aluminium Round bar Aluminium Flat bar Aluminium Square / Hex bar Aluminium Plate Aluminium Tread Plate / Chequered Plate Aluminium Square tube Aluminium Round tube Aluminium Rectangular tube Aluminium Angle Aluminium Channel Aluminium Tee sections Aluminium customized Profile Aluminium Forgings Aluminium Seamless Tube Aluminum Drawn Products Aluminium Architectural / Building profile

Aluminium Alloys have high strength together with excellent machining characteristics. Aluminium Alloy commonly used in many aerospace structural applications due to its high strength. Other applications include military vehicles, bridges, weapons manufacture and structural applications. 7075 is one of the highest strength aluminum alloys. It is not weld able and has less corrosion resistance than other aluminum alloys. The mechanical properties depend on the temper of the material. Commonly used in the bicycle industry, aircraft structures, and in rifles for the American military.   Specificationn : Available shapes: Sheet, Plate, Flate, Round, Pipe & Squares Grade - 1100, 2014, 2024, 5052, 5083, 6061, 6063, 6082, 7050 & 7075.

• Material: Aluminium Alloy
• Shape: Rectengular, Square
• Weight: 1-100kg
• Color: Metallic
• Application: Construction
• Surface Finishing: Non Polished

We provide the best quality of 2017 Aluminium Alloy in the market. Our 2017 Aluminium Alloy is made from the best of qualities and has helped us establish ourselves as a hub for good quality products. We cater to and provide the best of our products to large scale clients that include bulk dealers, large sale buyers and retailers. Harsh Steel exports Aluminium 2017 (AlCu4MgSi, A92017 Aluminum) alloy Coils Sheets and Plates, Flats, Square & Round Bars, hex Bars and Pipes also commonly known as 2017-T4; AMS 4118,ASTM B211,ASTM B216,ASTM B316,QQ A-225/5,QQ A-430,SAE J454,UNS A92017, Which has Good machinability and good mechanical properties. Used in rivets, general structural applications and transportation.   Chemical composition for aluminium 2017 Alloy : Aluminum (Al) 91.6 to 95.5 % Copper (Cu) 3.5 to 4.5 % Manganese (Mn) 0.4 to 1.0 % Magnesium (Mg) 0.4 to 0.8 % Silicon (Si) 0.2 to 0.8 % Iron (Fe) 0 to 0.7 % Zinc (Zn) 0 to 0.25 % Titanium (Ti) 0 to 0.15 % Chromium (Cr)   Tempers for Aluminium alloy 2017 : 2017-O Aluminum 2017-T4 Aluminum 2017-T42 Aluminum 2017-T451 Aluminum

• Material: Aluminium
• Color: Silver
• Diameter: 0.1mm - 3.0mm
• Shape: Round
• Surface Finish: Coated
• Usage/Application: Commercial

• Material: Aluminium
• Grade: 7075
• Color: Silver
• Shape: Round
• Rust Proof: Yes
• Customization: Yes

We are offering aluminium alloy , alloy 7075 has been the standard workhorse 7xxx series alloy within the aerospace industry ever since. It was the first successful al-zn-mg-cu high strength alloy using the beneficial effects of the alloying addition of chromium to develop good stress-corrosion cracking resistance in sheet products. Although other 7xxx alloys have since been developed with improved specific properties, alloy 7075 remains the baseline with a good balance of properties required for aerospace applications. alloy 7075 is available in bare and alclad sheet and plate product forms in the annealed state as well as several tempers of the t6, t73 and t76 types.