Aluminium Dealers in Mumbai

We are offering aluminium, brass, copper, phospherous bronze. aluminium in grade 1050/1100/5052/6063/6061/6351 (h 30) in shape of sheet, plate, patta, flat, extrusion, round etc. brass, copper gun metal lead, tin in shepe of sheet, plate, coil, strip, round, hexagon, pipe, ingot etc.

• Application: Industrial
• Fe: 45-50%

• Color: Silver
• Use: Heat exchanger
• Operating Temperature: -30
• Temperature Coefficient: -0.07%/℃
• Responsivity: 0.06A/W
• Spectral Detection Range: 220

• Voltage: 100V

The Anodising Process is an electrolytic process which results in the surface of the Aluminium Strip being converted to a layer of Aluminium Oxide which firmly adheres to the metal surface and forms a nearly homogeneous bond with the Aluminium. This oxide layer functions as an electrical insulator with insulating properties dependent on the oxide layer thickness. The oxide layer thickness is controlled during the Anodising process so as to meet the desired insulation level which would be adequate for the inter-turn voltage. For example, if the Inter-turn Voltage is 1V, then the insulating level would be in excess of 100V. The Al2O3 aluminium oxide layer has high wear and abrasion resistance. It has a melting point of approximately 2000oC which exceeds the melting point of 658oC of the base Aluminium metal. Thus, effectively the oxide layer would have refractory properties and a Coil made from Anodised Aluminium Conductor could insulate till it melts.

Ferro Aluminium is ana allow which is formed by combining iron aluminium. Ferro Aluminium is primarily used as a de-oxidation agent for steel, as well as for mouding in combination with scrap copper carbon steel.

When it comes to superior quality Industrial Aluminium supplier, then there are very few alternative available to Industrial Aluminium provided by us. Our Industrial Aluminium have occupied a standard market place and are well accepted by a large group of people.Our stocks cum supply range of industry raw materials are H30, H2O, H9, N4, N5, N6, IC, B, E, commercial and extruded qualities.

• Material: Aluminium
• Brand Name: Hindalco
• Thickness: 0.30 to 1.22 mm
• Width: 610 to 1250 mm
• Coil Density: 6 Kg/mm (Max)
• Material Grade: 1050,1060,8011,1200,1100,3003,3105
• Weight Per Coil: 0.3 to 5 MT
•  :  

We providing the highest quality products at a tremendous value to our customers. Bimetallics combine the best aspects of two metals in a single conductor whose overall performance is unbeatable.

We offer a wide range of Aluminum Wires which are manufactured using quality raw materials used in diverse industries. Available in different gauge. Aluminium Wires are widely used in communication cables, Flexible cables, Coaxial cables, Wire used electrical appliances, Aluminium pads, Anodic treatment, Water-bottle carrier, parcel grids for bicycles, Ornamental chains for costume jewellery, Mosquito nets.   Range: -18 SWG to 000 SWG   Features: -     Conductivity. Lightweight. Strength. Workability. Compatibility with Insulation.  

Aluminium 6061 | Aluminium He20 is a medium to high strength alloy with a strength higher than 6005A. Aluminium 6061 | Aluminium He20 has very good corrosion resistance and very good weld ability and efficiency. Aluminium 6061 | Aluminium He20 has medium fatigue strength. Aluminium 6061 | Aluminium He20 has good cold formability in the temper T4. Aluminium 6061 | Aluminium He20 is a precipitation-hardened aluminium alloy, containing magnesium and silicon as its major alloying elements.Aluminium 6061 | Aluminium He20 is more easily worked and remains resistant to corrosion even when the surface is abraded.

• Brand Name: Hindalco
•  Widths: 1044 mm And 920 mm
• Length: 1500 mm And 6500 mm

• Power: 100V

The Anodising Process is an electrolytic process which results in the surface of the Aluminium Strip being converted to a layer of Aluminium Oxide which firmly adheres to the metal surface and forms a nearly homogeneous bond with the Aluminium. This oxide layer functions as an electrical insulator with insulating properties dependent on the oxide layer thickness. The oxide layer thickness is controlled during the Anodising process so as to meet the desired insulation level which would be adequate for the inter-turn voltage. For example, if the Inter-turn Voltage is 1V, then the insulating level would be in excess of 100V.

We are offering Al 35%min

We Offer Copper , Brass , Aluminium. Rods , Patta , Wire , Pipes , Hex , Sheets

We are the manufacturers of ferro aluminium ,aluminum ingots,shots.cubes,zinc oxide.

We are offering latest products of Ladder Aluminum for all age man & woman.

Largest stockist of calcium metal in india , ready stock available , pure calcium and calcium aluminium alloys of all grade , calcium lumps , calcium granules, calcium , etc..

anodised aluminium, Safety Signs, acrylic product, Safety Products

anodised aluminium, aluminium anodised labels, Stainless Steel

luggages aluminium, aluminium foil bags, Canvas, Cotton

Scrap Aluminium, E Waste, E-waste Recycling Services, refurbished computers

polishing aluminum, Benzene, Calcined Alumina, Cyclohexane, Cyclohexanone

specializing in aluminum, Metal, Machining, Stainless Steel

PVC Laminated Aluminium, Plastic Packaging Materials, Galvanized

glazing aluminium, Wooden Door, Dyes, Gate, glazing, Pigments, Silicon

aluminum anodized etched, Brass, Stainless Steel, name plates stickers

ALLUMINIUM, steel plants, nonferrous metals plates, ferrous metal plates

primary aluminum, Aluminum Alloy Ingots, Die Casting, Ferrous Scraps