Anaerobic Adhesives Dealers in Mumbai

• Material: EPDM Sponge
• Color: Any
• Density: 0.65 g/cm³
• Shore Hardness: 45±5 (Shore ‘00’) / <5 (Shore ‘A’)*

Advantage of EPDM self Adhesive Strip: Easy to install, just peel off the self adhesive backing. The adhesive backing tape used is not fully resistance to water, therefore where there is a large amount of moisture or water present; it is advisable to use plain expanded EPDM a good conduct adhesive. EPDM provide excellent resistance against oil, acid alkalis has good weathering, heat ozone resistance. Highlighted Points: � Small large quantities of EPDM sponge strip available. We are manufacturing EPDM sponge strip in both small runs large runs, so regardless of the size of your order APPL can deliver any size. � EPDM sponge strips is currently supplied in two different colors: Black, White, Gray, Green, Red, Brown, etc. Our EPDM sponge strips compress when pressure is applied to them, meaning that when teo mating surface are put either side of the strip, that a seal is created. � Bespoke custom EPDM sponge strip available. We can produce cut lengths to fit a particular design, or even join standard 25 meter rolls to provide longer roll lengths if required. � Various densities of EPDM sponge strip. Our standard range of EPDM sponge strips are supplied in a medium density, but firm grades as well as softer grades are also readily available depending on the application. Firm grade EPDM sponge strip are supplied mainly when two heavy surfaces are claming down onto the strip, but only little compression is required to seal. NOTE: Price vary as per sizes. Kindly email or call us for best available rate.

• Brand Name: Fevicol
• Country of Origin: Made in India
• Model Number: ANR 142
• Packaging Size: 50 ml
• Appearance: Light Yellow Clear Liquid
• Maximum Viscosity: 1000 cP
• Specific Gravity: 1.1 +- 0.05 %
• Maximum Setting Time: 20 Minutes
• Maximum Breakaway Torque: 200 kgf.cm
• Maximum Prevailing Torque: 200 kgf.cm

• Color: Standardized
• Color: Standardized
• Features: Chemical resistant seal , Extremely durable , Easy to use.

Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses Permits disassembly with hand tools Especially suited to small thread size.

• Application: Automobile,Construction
• Color: Transparent , Light Yellow
• Form: Paste
• Purity: 80%-90% ,99.99%
• Packaging Type: Plastic Tube , Tin Container
• Packaging Size: 50-100 G, 100-200 G , 200-250 G

Product information BrandLoctiteManufacturerLoctiteNumber of Memory Sticks1Item Weight18.1 gPackage Dimensions8 x 4 x 2.2 cm; 18.1 GramsItem part numberLoc_243Are Batteries IncludedNo

• Country of Origin: India
• Brand Name: Dragon Head Gasket Shellac
• Color: Black

Gasket Shellac  Price : Rs 180-250 per box

We are engaged in manufacturing and supplying Gaskets, Washers, Seals, Rubber Strip, Sponge strip and Sheeting. Standard components are made of Chloroprene or Neoprene Rubber, Silicone Rubber, FKM or Viton Rubber, EPDM Rubber, Nitrile Rubber, Butyl Rubber, etc. These products are made as per customer’s requirement and specification. We also have the facility for self-adhesive. These products are tested and inspected at every level to achieve utmost quality of the products and cater to the needs of customer.

• Brand Name: Loctite
• Feature: Impact Resistant, Moisture Resistant, Heat Resistant, Water Resistant
• Grade Standard: Chemical Grade
• Packaging Size: 50ml
• Part No: 57739
• Viscosity Range: 70.000 -130.000
• Thread Size R: R3 Inch
• Thread Size M: M80
• Applications: For Metal Parts Thread Sealing
• Temperature Range Degree Celcius: -55 to +180 Degree Celcius

• Type: Gasket Sealants
• Application: Construction
• Grade: Chemical Grade, Industrial Grade
• Form: Liquid
• Packaging Type: Drum, Plastic Tube
• Feature: Heat Resistant, Impact Resistant, Moisture Resistant, Water Resistant
• Packaging Size: 0-5kg, 5-10kg
• Surface of Application: Ceramic, Gi Sheets, Glass, Paper, Plastic, Wood

• Brand Name: Hi Bond
• Application: Construction
• Surface of Application: Plastic
• Packaging Size: 100 ml
• Grade Standard: Chemical Grade
• Flash Point: 20 Deg C
• Form: Liquid

• Loctite 272 Threadlocking Adhesive 50 ml: Red
• 50 ml: 1155
• 1: 1

LOCTITE 272 is designed for the permanent locking and sealing of threaded fasteners. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Red, high strength, medium viscosity, methacrylate-based threadlocking adhesive with high temperature resistance. LOCTITE 272 is a red, medium viscosity, methacrylate-based threadlocking adhesive with high strength. With a fixture time on steel of 10 min, brass 5 min and stainless steel 15 min, it is ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. It has a breakaway torque on M10 bolts of 23 Nm. Medium viscosity Breakaway torque on M10 bolts of 23 Nm High temperature resistant Resists vibration High temperature, high strength threadlocker Seals threads - allows through-hole tapping.

• Pack Size: 250 gms bottles, 1 Kg bottles & 30 Kg Pail

J-Bond 301 is a one-part solvent-free, moisture curing, polyurethane adhesive with outstanding resistance to weather, moisture, water and temperature. J-Bond 301 exhibits excellent ageing properties. It is a moisture curing product; hence for the applied product to receive moisture, it is important that one of the surfaces is porous. If both surfaces are not porous, moisturizing the surfaces with wet clothatomized water-spraying will assist curing the adhesive. J-bond 301 is suitable for structural bonding of large surface area. It is ideal for the assembly of varios substrates such as wood, asbestos, honey comb panels, cement, metals, laminates, various plastic material, polyurethane-nucleus sandwich panels and substrates with various coatings. J-Bond 301 has high peel strength. It is suitable for bonding PVC flooringother flooring in buses and railway coaches.

Hitlock threadlocker is a reliable way to prevent the release or loosening of thread joints due to mechanical vibrations or environmental factors such as corrosion and temperature fluctuations. Hitlock threadlocker is suitable for a range of applications. Key characteristics of threadlockers Single-component Clean and easy to apply Resists vibration Locks and seals all threads Reduces inventory costs The main criteria in choosing the right threadlocker out of Hitlock’s wide range are the material (plastic or metal), diameter and thread length of the screws or stud bolts used, as well as their strength class. Many Hitlock products are universally applicable for a range of thread sizes. Benefits of a liquid threadlocker The threadlocker from Hitlock functions by curing in the absence of air. Compared to mechanical locking elements, Hitlock solutions have the advantage of a low cost per unit and efficient storage, supply, maintenance and repair. Product life is also extended thanks to the secure seal. Liquid threadlocker are particularly secure as the clamping force is retained, resulting in a high breakaway torque. Fast cure speeds for quick pressure testing. Dismantleable and permanent threadlocking that increases project versatility. 100% leak-free seal, even with mis-threaded fittings. Protection against corrosion. Wicking sealants to penetrate tight fitting or preassembled parts. Liquid adhesive provides greater surface-to-surface contact than mechanical fasteners. Resistant to oils, solvents and other surface treatments. Available in permanent and removable formulations. Superior bond strength; often exceeds that of substrate material. Wide temperature range; from 55 to 230°C Gap fill capability from interference fits up to 0.5mm. Seals, bonds and locks with one product.

• Type: Pipe Sealant
• Application: Construction
• Packaging Size: 50 to 100 ml
• Surface of Application: Plastic
• Brand Name: Hi- Bond
• Form: Liquid

rtv gasket maker, Waterproof Membrane, FIRE STOP SILICONE SEALANT

The D Profile is an extruded and self adhesive EPDM cellular rubber sealing strip. Easy to compress The hollow shape gives an optimal tightness Quick, easy and clean to use Very good aging properties Good resistance to solvents Available in 2 different packaging Free from harmful substances

Customers can get in touch with us for obtaining the Cylinder Head Gasket Compound at modest rates. The offered Gasket Compound is preferred by customers in both domestic and international markets. As a preeminent Manufacturer, Exporter and Supplier of Gasket Compound from Maharashtra, India, we ensure customers obtain a quality assured product. We are proficient in delivering small or bulk orders of Cylinder Head Gasket Compound at economical rates.