Analytical Instruments Dealers in Mulund, Mumbai

• Feature: 32-Bit Contex-M3 Arm Processor 5.7" QVGA TFT Touch Screen Display

The Agasthya series BI 7100 land fill gas analyzer has been designed for monitoring recovered and processed gases from landfill and biogas sites. This equipment continuously removes moisture from the wet sample gas and comes complete with pre-filter, sample pump, flow meter, continuous moisture removal system, long-life O2 sensor, infrared CO2 & CH4 sensor, alarm relay contacts, and 4-20mA outputs for each gas measured.

• Brand Name: Bhoomi Analyzers
• Driven Type: Battery
• Color: Off White
• Condition: New
• Automation Grade: Automatic
• Application: Industrial Use
• Certification: ISO 9001:2008
• Feature: Accuracy, Battery Indicator, Digital Display, Easy To Carry, Highly Competitive, Light Weight, Low Battery Consumption, Temperature Controlled Sensors For Maximum Stability. Long Life Electrochemical O2 Sensor. Infrared Sensors For Reliable Measurement Of
• Production Capacity: 50
• Type: Gas Analyzers
• Weight: 0-5kg
• Response Time: T90<3sec
• Warranty: 1yr
• Country of Origin: India
• Detected gas: CO, O2, SO2
• Voltge: 9-12VDC

We are leading supplier of NANO PARTICLE SIZE ANALYSER for dark & concentrate samples, IN - SITU ONLINE nano particle analyser for nano syntheis/analysis , ultimate nano particle analyser for water characterization(LIBD/LIBS).  

• Weight: pH Measurment
• Usage/Application: Laboratory
• Range: 0-14pH
• Temp. Compensation: Manual
• Temp.Range: 0°-100° C
• Power: 50 Hz 230 V

Blood gas analyzer utilizes the latest optical technology. This technology does not use electrodes or contact points, eliminating the need for costly electrodes maintenance. analyzer has a measuring chamber heated to 370 Celsius. This allows for a wide operating temperature range to meet the needs of colder environments such as the operating room. Reduce pre-analytical errors with automatic sample aspiration, bubble and clot detection and step-by-step picture instruction on the colour touch screen.

We are offering fixed gas monitors nationwide. The efficiency of the fixed gas monitors consist clarity in digital displays that transparently depicts the necessary information as per your requirement. We are offering these fixed gas monitors in different shapes, sizes and colors. We want you to select the best place to invest. features available as common card designdurablelong time usesensitiveeasy maintenance uses detectorprovides protectiondepict able fixed single / multi gas monitoring the fixed monitoring system consists of two parts : monitoring model gazalarmsensing model gazsens model gazalarm the monitoring unit consists of power supply card : size - 220 mm x 100 mm supplies power (9 v dc to 24 v dc) to complete system including gas detector assembly (field unit) with a current carrying capacity of one card is maximum up to 5 amp. This can cater up to 10 cards in one rack. Multiple numbers of cards in multiple numbers of racks in one panel can be provided if the numbers of channels are more than ten.control card : control card provides fixed voltage & current required to the field unit. It also accepts 4-20 ma signal from field unit. This signal is then processed by control card using instrumentation amplifier. The processed signal corresponding to the gas concentration available in the field is displayed by two or three digit 7 segments led on control card display section. Two level alarms (latching/non latching type) are generated if the gas concentration is above preset limit. Fault alarm also is provided on the control card in case of sensor open/ short, cable from sensor is open/ short & under range/ over range conditions appear. The control card also delivers 4-20 ma.(repeater) output signal for plc / dcs.facility card : this card receives the alarm condition signal from control card. Depending upon the alarm conditions it activates the relays mounted on it & hoots the buzzer or siren or sends control signal to the pre-desired device. It also consists of alarm accep, reset & lamp test conditions. The push buttons are provided on the fascia plate to achieve the desired job.mother board : this board is provided on the back of 19” rack. The mother board pcb is provided with the copper tracks & euro connectors to hold all the cards like control card, power supply card & facility card. With the help of proper design reduces the back panel wiring of all cards..

• Features: Accurate, Precision Finish, Economical
• Applications: Nanotechnology, Polymers,Material Science,Biological etc.

• Power: Li-Ion battery
• The measuring range of the coercive force, А/сm (А/m): 1 - 40,0 (100-4000)
• Measurement cycle, seconds, not more: 5
• Magnetize: pulse
• Additional scale for calibration: 7
• Battery life, h, not less: 8
• Dimensions of the electronic unit, mm: 270 x 230 x 70
• Dimensions of the probe, mm: 200 x 170 x 70

The Sievers M9 Portable Total Organic Carbon (TOC) Analyzer is the most versatile of the M9 TOC Analyzer Series, offering maximum flexibility for how and where it is used. Weighing just 9.4 kg (20.8 lb), it’s lightweight, compact design makes it a powerful troubleshooting analysis tool that can be installed online for continuous measurement or carried to any location in the water system. The M9 Portable is engineered for ease of use and cost-effective operation, allowing it to be used for single grab samples, with an optional autosampler, or in a process stream for continuous on-line TOC measurement. An unequalled level of efficiency and flexibility Operating Range – 0.03 ppb to 50 ppm Patented Membrane Conductometric Detection technology Meets Pharmacopeia requirements of USP, EP, IP and JP Fast, Smart and Versatile to Optimize Sample Processing time Touch Screen interface simplifies operation and data review Measures discrete grab samples, automated analysis with Auto sampler or online Optional Turbo Mode enables 4 sec measurement Optional 1st Stage Conductivity as per USP and EP for grab or auto sampler mode Designed for on-line cleaning validation applications Full compliance support for 21 CFR Part 11

A pH Meter is an electronic device used for measuring the pH (acidity or alkalinity) of a liquid (though special probes are sometimes used to measure the pH of semi-solid substances). A typical pH Meter consists of a special measuring probe connected to an electronic meter that measures and displays the pH reading. Being competent pH Meter Suppliers, we can efficiently handle bulk orders and make timely delivery.

• Automatic Grade: Automatic
• Brand Name: Systea
• Measurement Mode: Continuous
• Resolution: -0 to 10 ppm-0.001 ppm, -10 to 100 ppm - 0.01 ppm, -100 to 1000 ppm - 0.1 ppm
• Accuracy: better than 5%; SD% of 7 replicates at 20% of the full scale
• Material: MS
• Range: - 0.050 to 1000 ppm NH3
• Measurement Principle: Gas-Sensing Ammonia Probe
• Protection Type: IP55
• Output Signal: 4-20mA
• Sample Temperature: 10deg C - 30deg C
• Colorimeter: Dual beam, Silicon detector
• Measuring Interval: Programmable

• C18 250 X 4.6 X 5um: C8 150 X 4.6 X 5
• TRB Petro.15 0.25 150 100 Temp -60 to 300/320: Ask for price
• Color: Ask for Price

We are pleased to introduce ourselves as an authorized distributor to provide sales and after-sales services for the Teknokroma range of products in India.   Teknokroma products are manufactured through state of art technology and are proven products at an economical price rate.    We do keep stocks of products for prompt supply to avoid time delays.   We also supply GC/ HPLC consumables to fulfill your requirement at one point.   We will be pleased to receive your inquiries to enable you to serve better.  

• Automation Grade: Automatic
• Weight: 3kg
• Application: Industrial Use
• Brand Name: SYSTECH
• Ambient Temperature: 0 to 40 deg C, RH 0-99 percent non condensing
• Battery Life: 36 hours
• Ingress Protection: IP40
• Model No: EC92DIS
• Sample Temperature: 0 to 40 Deg C
• Dimension: 257W x 102H x 262D (mm)
• Resolution: 0.05 percent of scale
• Response Time: 90% of reading within 20 seconds

• Features: High Accuracy and continuous gapless recording , CAT IV 600V - safe enough for incoming power lines, LAN, USB and SD card interfaces.
• Accuracy: V:±0.1% , W:±0.2% rdg. ±0.1% f.s
• Frequency: 700 kHz
• Maximum overvoltage: 6000 V

SABIA analyzers provide real-time elemental analysis through continuous measurement of the elemental composition of the material under test. The list of displayed analysis results is completely user-defined and can include the amounts of sulfur, total ash, any or all ash constituents, as well as moisture content and BTU ratings. Using PGNA elemental analysis combined with our proprietary algorithms the analyzer integrated moisture feature measures the total moisture of the coal, enabling a more accurate BTU result. Control blending  

• Type: Digital
• pH Range: 0 to 14 pH
• Type of PH Meter: Portable
• Light Type: LCD Digital pH meter

microwave digestion system, Industrial Microwave Oven

Product Brand: Arvind Industrial Comprising Of: automatic temperature compensator, instruction manual, guarantee card, dust cover, mains cord, combination electrode, electrode stand with clamp, Buffers of pH4 & pH7, KCL Environmental Operating Conditions Operation: Indoor Temperature: Ambient to 45°C Relative Humidity: 5% to 90% Non-condensing

• Type: Digital
• pH Range: 0 to 14 pH
• Type of PH Meter: Portable
• Light Type: LCD Digital pH meter

The Beckman Coulter LS 13 320 Series is a system of multifunctional particle characterization tools. Its patented state-of-the-art, laser-based technology permits analysis of particles without the risk of missing either the largest or the smallest particles in a sample. The LS 13 320 technology is based on Fraunhofer and Mie theories of light scattering. The LS 13 320 differs from other laser-based instruments by virtue of its wide dynamic size range, number of size channels and sample measurement options.

• Brand: Flexitest
• Power Supply: 220VAC+/-10% 50Hz / 120VAC+/-10% 60Hz
• Testable Gases: O2 (Standard) And CO2 (Optional)
• Test Principle: Electrochemistry And Infrared Absorption
• Test Range: 0
• Resolution: 0.1% And 0.01%
• Test Accuracy: +/-0.3% And +/-(0.03% + Displayed Value * 5%)
• Sampling Volume: 6
• Instrument Dimension: 220mm (L) X110mm(W) X70mm(H)
• Net Weight: 0.6 kg

High Pressure Solvent Delivery Pump Multi Wavelength UV-Detector Sample Inject Valve - (Rheodyne 7725 I) Lc Column (Usa) - {C18 (4.6 X 250) mm} Workstation Software. Wavelength range: 190˜700nm, Wavelength accuracy ± 1 nm Spectral bandwidth-8nm, flow cell volume 8µL, optical length-10nm.

• Brand Name: Hanna
• Material: Plastic
• Packaging Type: Box
• Model Name/Number: HI98107
• Usage/Application: Laboratory
• Type Of Ph Meter: Portable
• Temperature Electrode: 0-120 Degree C

• Model: ADS
• Application: Industrial Use, Laboratory Use
• Brand Name: ADS

Sulphur determinator these elements are not readily measured by ICP Spectroscopy and an alternative technique is needed. The LECO CS combustion analyzer is used for the measurement of Carbon and Sulfur in metals, ores, ceramic and other inorganic materials.

chlorine dioxide monitor, online process instruments, Ammonia

arterial blood gas analyzer, Troponin T Sensitive Rapid Test Strip

Laboratory Testing Instruments

dissolved gas analyzer, Electrical Resistivity Testing Services

Analytical Instrument