Anti Seize Paste Dealers in Mumbai

Benefits : Light colour has advantages over dark coloured greases. Helps prevent staining during assembly. Excellent lubrication properties. Finds use as antiseize and anti stick agent. Prevents water washout. Guards against rust & corrosion. Applications : For Machinery used in textile, paper, printing press, home appliances, office equipment, plastics, food And beverages, instrumentation, optics, electronics, pharmaceutical and related industries where deep Coloured lubricants are not recommended.

• Packaging Type: 400 Ml Aerosol Spray
• Shelf Life: 24 Months from Date of Manufacture in Sealed Condition

High temperature copper based anti seize thread compoundSolid lubricant paste for all threaded & bolted connections; lead and nickel freeApplications Highly recommended for use on all threaded and flanged connections operating at very high temperatures and corrosive conditions to enable faster and rapid non destructive disassembly after long operational periods as in autoclaves, furnaces, boilers, reactors, turbines, extrusion mandrels, compressors, heat exchangers, gas generators, plastic moulding machines, chemical and steel plant equipment. Heavy duty thread compound for studs, nuts, bolts, valve stems, spindles, exhaust pipes, cylinder and engine head screws, steam lines exposed to high temperatures, water and corrosives to provide complete protection from seizure and corrosion and which also need to be reopened or re tightened after assembly and initial operational period. Benefits Extremely wide service temperature range of -20°C to +1100°C Makes disassembly easy and non-destructive even after long operational periods at high temperatures and adverse working environments High load withstanding capacity Creates an effective matrix between mating surfaces to prevent metal-to-metal contact Protects surface from wear and friction Good corrosion protection Water resistant Ensures consistent tightening of threaded connections and provides an optimum balance between torque required to tighten and pretension Prevents bolt breaking, sintering, fusion, seizure, thread striping and distortion of threads Meets requirements of MIL-A-907E Directions for UseShake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. For cleaning the valve dip- tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.Caution:- Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.General Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).DisposalAll used and unused product should be disposed of in accordance with state regulations.Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.Limited Warranty The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

• Packaging Size: 1 Kg
• Brand: SILKOT
• Usage: It is Excellent Antiseize For Dissimilar Metals Subjected to Corrosive Atmosephere. Prevents Metal From Seizing, Galing & Rusting it is use for nozzle of ingection moulding machine.
• Features: MoS2 Based, Water Resistive, Excellent Antiseize.

We are the main supplier of this product.

• Stop Carbon penetration in metals during Gas carburization: ( Heat Treatment )

We are offering Stop Off Paste.jay stop c - used for - selective Gas Carburization (Heat Treatment) of gears, shafts, etc for Auto, Locomotive, aerospace & mining industry, CRUSHING GEARS.

• Brand Name: Molygraph
• Model Number: AS 10-60-80
• Base: Lithium

We are offering molybased antiseize paste. Benefits : 1. as series have an optimum content of solid lubricants in the form of molybdenum disulphide and other 2. non metallic modifiers. 3. provides excellent lubrication property. 4. guards against rust and corrosion. 5. prevents wears and seizures during assembly and dismantling. 6. highly economical. Applications : 1. as an antiseize for threaded components like bolts & nuts, lead screws, valve stems and other assemblies. 2. as a fine layer for sliding surfaces to avoid seizures and stickups. 3. for lubrication of press fit components. 4. for slow moving trolleys, roller bearing near high temperature areas.

Anti Seize & Assembly Pastes