APK Engineers Sector 1, Mumbai, Maharashtra

Models T-22 & T-35 Ideal heavy-duty burners for bulk frying and general heating requirements of industries andpharmaceuticals, produce powerful torch type blue flames. Available in two capacities.These burners are recommended to be used at a pressure of 320 to 490 gm/cm2(4.5 psig),however, this may be varied by ± 25%; the heat output being varied accordingly.These burners are also termed as T-22 or T-35 or T-2; Also available in model T50, T78

Multipurpose heating burners for variedapplication in many industries. Example: Die heating, paint cleaning, tank cleaning, poultry dirt burning, oven firing, etc. These burners are to bescrewed on the torch handle.

Model No. G-9, G-10 and G-11 Ideal heavy-duty burners for bulk frying and general heating requirements of industries andpharmaceuticals, produce powerful torch type blue flames. Available in two capacities. These burners are recommended to be used at a pressure of 320 to 490 gm/cm2 (4.5 psig),however this may be varied by ± 25%; the heat output being varied accordingly. Also availablein Model G10 Operating pressure (Variable: 320 to 490 gm/cm2: (4.57 psig)

Third party inspection and certification can be arranged at extra chargeApplied for stationary and transport tanks or charged pipelineNo need of any special safeguardDesign to protect container which might be created by hydrostatic pressure Due to overfilling or by pressures resulting from exposure to external heat de NoDescription SRV 102 Safety Relief valve Use for tank fitting or pipeline PRS Suitable to LPG / Propane(C3H8) Gas To protect from exposure to external heat or overfilling inlet: 1/8” 1” NPT Ext. For up pressure setting & test at 19.5 kgf/cm2

 Small capacity flow meters• Proven rotary piston design• High accuracy• Heavy metal base prevents toppling.• Suitable for natural gas, LPG and other non aggressive gases• Ideal for NG / LPG distribution and burner consumption measurements

Models M-22 & M-35 Most appropriate for heavy heating requirements of commercial cooking and industries:General and pharmaceuticals and Dairy. Produces lovely blue sunflower shaped flame; availablein two capacities. These burners are recommended to be used at a pressure of 320 gm/cm2(4.5 psig), howeverthis may be varied by ± 25%: the heat output being varied accordingly. These burners are also known as M-22 or M-1 and M-35 or M-2Also available in model M50 & M78.Specifications: Operation pressure : 320 gm/cm2(4.5 psig) Connection 3/8” BSPM Compression inletBurners in this model of higher capacity can be supplied on demand.These burners could be manufactured for piped natural gas or LP gas.

V TYPE   industries.Produces two linear flames with wider heat distribution, flame stability, increased efficiency and long life ensured by stainless steel corrugated ribbons Available in four sizes providing different flame lengths. Specification:Rated operation pressure: 320 to 490 gm/cm2 (4.5 psig) Connection 3/8” BSP Compression inlet.The above burners are available in side loading and bottom loading. Both in two ribbons and single ribbon. Also available in pencil models.

code no.description43021amulti point lock high pressure regulator. Used on lpg quick coupling cylinder valve. Adjustable flow control. Inlet as per bsen: 12864 inlet size: 25.6 mm outlet 21.8x 1.814 si lh or as per customers requirement. for direct cylinder mounting with 3/8” outlet for variable pressure release from 0 to 2 bar.high pressure adjustable regulator with knob operated type.

Material : Stainless Steel

Application : Water

Color : Blue

Industrial Use : Locomotive Workshop

Pressure : High Pressure

Feature : Durable, High Performance, High Strength, Non Breakable, Safety Certified

Flow Rate : 0-100Lpm

Four different pulse generators: • T2Xnf• MF (middle frequent)• Measuring range: 3-650 m3/h• HF (high frequent) There is a solution for every demand.

The regulators R-2402 R-4108 are mainly used for ammonia gas. The trim parts for these regulators are of stainless steel R-4108 is preset type regulator and is mainly used as second stage pressure regulator. R-2402 is adjustable pressure regulator and is mainly used as first stage pressure regulator. R-2703 is a fine control adjustable pressure regulator which is used when precision pressure control is required for instrumentation purpose like Air-Gauges. Wealso manufacture regulators suitable for corrosive gases like Cl2, SO2, etc.

These die-cast multi-point adopters enable the connection of the cylinders fitted with self-closing valves to a high pressure system through a standard M.E.C.V. thread with unreduced pressure and a high flow rate. The adopters fitted with a non return valve to ensure that there is no return flow of LPG whilst cylinders are being disconnected.The salient features of these adopters is the multipoint locking mechanism combined with a face seal ensures that the adopter will not leak even if it is loaded off axis. The quick disconnecting arrangement coupled with a safety interlock ensures that the device can only be disconnected after turning off the gas flow. Both adopters featured above are available in 22 mm and 25.6 mm seats, and 3/8” or MECV outlet size.Makes available: Vanaz, Kosan or Vel.

Manifold lug MECV MS Adopter Union Pin Set With Nut Non return valve for VOT manifold M.S. Adopter 3/8” B.S.P.P.M. X Bull nose for FECV Nut. Available for 1/2” and 1” pipelines Bung: Manifold bung for F valve fitting size 3/4” B.S.P.T.M. or 1/2″ B.S.P.T.M.

Made as per customer’s specification in GI and SS braiding with rubber hose and end fitting in brass or MS plated.

SALIENT FEATURES Suitable for LPG and Natural Gas. Excellent selectivity against other gases hence no false alarms. Power fluctuations- built in regulator continuously monitors supply voltage and compensates for fluctuation in supply voltage. Model working on 12-volt battery also available. Longer life span. Automatic 1 minute initial warm up delay. Loud alarm of 90 db when presence of gas is detected. Visible led (light emitting diode) warning on gas detection. Unaffected by change in humidity upto 90% Rh (Relative Humidity). Safe alarm point-alarm point comes factory at 1500 ppm i.e. 10% (subject to change) of L.E.L. (Lower Explosive Limit). This provides sufficient time to take action avoid danger. Does not cause false alarms due to minor leakages which may occur while lighting the burner. Gas guard is capable of detecting even the minor leaks of LPG/Natural Gas. The device has the ability to operate even at very low concentration of the explosive LPG/Natural gas and adjustment can be made for alarm at desired concentration level. The strong (R & D) team working continuously towards innovation and quality up gradation of the product. ‘Gas Guard’ – a quality product tested for its highest standards-can help avert / minimize such loss of life and save wealth of the nation. STANDARD FEATURES > Highly specific to flammable gases> Long sensor life> Simple operation> Easy maintenance> Built in audible and visual alarms, works on domestic power supply> Built in system check It is designed for detecting and early warning of cooking gas leaks. This microprocessor based, low priced, wall mounted device is specially designed for domestic application. The detector can directly be plugged into the socket of 230VAC, 50Hz domestic supply.

Residential Diaphragm gas Meter The ITRON is a compact residential gas meter designed to measure accurately volumes of natural gas, LPG and all non-corrosive gases. ITRON (MID approved) Steel Version Basic features: Compact size: 1.2 dm3 cyclic volumeRange: G1.6, G2.5, G4EN 1359 & O.I.M.L compliance Design Long-term accuracy & safetyReady for remote reading & data management Quality World-class, ISO9001 certified, European Engineering and manufacturing. (Conversion software offered free with each meter) Application   > The ITRON with an installed base of over 30 million units. Is a versatile meter that makes it the preferred choice of many large utilities world-wide. Metrology > The ITRON meets O.I.M.L. EN 1359 and MID (certified delivered by the LNE), and more than 25 national metrological standards (DVGW, NMI Class 1….).> Its design and careful choice of materials enable the ITRON to meet the highest demand in international markets in terms of accuracy and long term stability.> During the preliminary test controls on the sonic nozzle test benches, all meters are tested at Qmin, 0.2 Qmax and Qmax. Oprating Principle > The ITRON is appositive displacement diaphragm gas meter with a stand-alone twin chamber measuring unit.> The twin chambers are each fitted with a flexible and gas-tight diaphragm which is moved by the differential between the inlet and outlet pressure. The Gas enter one side of the diaphragm pan while on the other side it comes out through separate port on the valve. When one side is full, the rotating mono-valve moves on to the next position, allowing the gas to fill the empty side. Construction > With its casing in steel, high protection against corrosion is ensured by 500 hours salt fog spray test resistant cataphoresis treatment. The aluminum version can withstand up to 1000 hours salt fog spray test.> The extreme strength of the case joint is achieved by rolling the belt & compressing the flanges into contact with a sealant applied between the faces. This forms a joint which is both gas-tight and file resistant.   Measuring Unit >  The achievement of the fixed stroke mechanism is the result of precision and high quality automation, and eliminates the need for an adjustable tangent. This confines all registration adjustments to the accessible change wheels behind the index.>  The long life synthetic diaphragms, coupled to the well-proven movement design, combine to give excellent stability and accuracy during the whole life on the meter.>  All materials have been selected for their superior resistance to chemical and gas. The valve and grid, thanks to a special Bakelite formulation, enjoy high gliding properties and are protected against premature wear.> Finally, a back-run stop prevents the meter from running backwards in case of tampering. Index > The meters are available with metric or cubic inch indexes. They come with a permanent magnet for pulse generation and can be retrofitted with a pulse transmitter. Ip54 and Ip67 versions are available for specific environments. Quality Assurance > Quality assurance procedures- such as ISO 9001- and strict controls throughout the manufacturing process ensure a very high quality level.

Manufactured in Copper or wire braided hose with standard end fittings as per customer’s specification stainless steel braided Teflon hoses for ammonia and Carbon dioxide.

High- pressure adoptors. Releases pressure upto 90 psig. To be fitted on to SC. Type cylinder to convert them into battery of cylinders for manifold installation. Both type of adoptors as on this page are available in 22mm and 25.6mm inlet size and 3/8” or MECV outlet size.

Gas filters are used to separate dust and other particles such as oils, waxes, tar etc which are all heavy ends in Low and High pressure service lines. These used to protect the system and the other safety equipment pipeline. the These Gas Filters have pressure loss across their end connections. There are two models of filters:1) Model F-1 which is 1 /2″ BSPPF X 1 /2″ BSPPF2) Model F-2 which is 1″ BSPPF X 1′ BSPboth the models are provided with pressure gauges. As the filter is used and its element gets contaminated with heavy ends, the outlet pressure starts dropping with respect to its inlet pressure. This can be visually read from the two pressure gauges provided on the filter. The element requires changing when there is a drop of 50% or more between its inlet and outlet readings. The element can be inspected, and replaced without any disconnection from the pipeline.  

Female Gas Ball Valves are approved in accordance to the latest Euro Norms EN:331:1998 Approved by Gujarat Gas, Inderaprastha gas Ltd New Delhi, Mahanagar gas Limited Mumbai Suitable For WATER, STEAM, Vacuum, Gas distribution such as Town Gas, Natural Gas, LPG etc. It Can be Used for Domestic & Commercial plumbing, industrial application, agricultural requirements & heating, sanitary, pneumatic systems, waterworks, oil pipelines, hot water services, condensate services, petrol & other hydrocarbon services etc. Features Body: Forged BrassBall: Forged Brass, machined to a mirror smooth finish hard chrome platedSeat: Pure PTFE conical arc cutSteam Seal: Double “O” Ring of Viton Rubber(Silicon Free)Nut: Self Locking Nyloc Cut, BSP Female Threads.The sealing dimensions and ball diameter Allow a blind operating angle≥10◦On request: American NPT threads ANSI B1.20.1Working Pressure: Water 20 bar, Gas 10 bar.Vacuum 10⁻ᵌ TorrWorking Temp: Fluids at -20◦ to +60◦CSizes: ¼” to 2”  

Available in size length of 2ft, 3ft and 5ft. or as per customer’s requirement. Used in cylinder connection to get more flexibility between steady manifold and cylinder.This pigtails is specially used in Railway Pantry Car, Mobile Canteen Van etc.Also available in with one side 3/8” BSPPF and other side FECV. Alfa Gomma make pigtails for all industrial gases in similar end fittings. These pigtails are available in G.I. Braiding, SS Braiding and R1 Alfa Gomma hose or Suraksha hose.

Metal Braided available in : 3/8” BSPF x 3/8” BSPF – Length 24”, 48”, 72”, & 120” or as per customer requirement. These pigtails are available in G.I. Braiding, SS Braiding and R1 Alfa Gomma Hose are Suraksha Hose.

Essential safety device to protect pressurized tank or container against loss of it Contents in the event of a pipeline fracture.Permits flow in either direction but controls its rate in one direction when it exceeds a predetermined limit.

Vanaz is the pioneer manufacturer of domestic pressure regulators in India. These regulators are mainly used for household purpose and are suitable for single burner / two burner gas stoves as well as grill cum cooking range having total consumption of 500 liter / hr of LPG. R – 0605 is meter regulator mainly developed for natural gas distribution through pipeline. In addition to pressure control system, it is having built in low – pressure cu off valve, which ensures the working safety.

For MECV connection Copper tube with brass bullnoze and nut.