Asbestos Centre Borivali West, Mumbai, Maharashtra

Pure Carbon an Interbraid multiservice carbon filament packing for pumps and valves. It is a special packing with low friction characteristics adapted easily and quickly into the equipment and requires only occasional gland adjustments.Application : Its heat sinking ability makes this packing an ideal seal in high speed rotary equipment, sealing against boiler feed water, steam, oils, aromatic aliphatic solvents, acids and alkalis except fluorine, oleum, fuming nitric acid and aqua regia. 

PTFE Teflon yarn coated with graphite and lubricated with an inert high temperature lubricant. • Six times better heat conduction as against pure P.T.F.E packings at comparatively high speeds. • Significantly low thermal expansion thus resisting 'over expansion' extrusion under service.

Non Asbestos Industrial Packing & Sealing Products, Asbestos Cloth, Webbing Tape, White Rope Asbestos And Non-Asbestos Caf Gasket Sheets, Industrial Brake Liner, Mill Board Sheet, Graphite Packing, Asbestos Ptfe Packing, Pure Teflon, Gfo, Flexible, Aramid Packing Ceramic Cloth, Rope, Tape, Glass Fiber Cloth, Rope, Tape, Asbestos & Kevlar Hand Gloves, Kevlar Cloth, Ptfe Teflon Sheet, Rod, Bush & Tape

we offer non-asbestos millboard sheet that is fabricated from selected clean, long non-asbestos fibres of uniform quality assorted with suitable incombustible binding materials. These ceramic millboards are known for its features such as heat and fire resistance and strength. Our non-asbestos millboards are perfect at temperatures up to 500°c (932`f) and even higher temperature when properly supported. Additionally, it can be used acceptably at extreme temperature up to approximately 1400`c. These are also known for its features such as withstanding vibratory and impact loads easily. available is soft, medium and hard grades, these sheets can be cut, drilled and screwed to supporting beams, and can be moulded or cemented to any shape. The medium grade is supplied only if it is specially asked by our clients. The hard grade is stiff and brittle and is used where rigidity is needed.   features :• high temperature tolerance• strength• can easily withstand vibratory and impact load• available in various grades• acid, sound and vermin-proof• strong and flexible packing method :• non-asbestos millboard sheet is packed into wooden crates of approx 110 kilogram• number of sheets in one crate varies according to board thickness.

 Made from Kevlar fabric and stitched with Kevlar threads (finger type hand gloves)• With inside woolen & FR Fabric lining• Heat resistance upto 550`C continuous working temperature and 850`C short term working    temperature.• Size : 12" to 22"

Made from Kevlar fabric and stitched with Kevlar threads (finger type hand gloves), With inside woolen & FR Fabric lining, Heat resistance upto 550`C continuous working temperature and 850`C short term working temperature.

Size : 12" to 22"

PTFE Teflon® yarn coated with graphite and lubricated with an inert high temperature lubricant. Hollow Core Gland Packing are specifically designed to reduce packing wear and shaft / sleeve wear in slow rotating equipments with excessive shaft run – out. Hollow Core Packing resists gland follower load and excessive run-out or whip in shaft.Gland adjustments and repacking are greatly reduces. Months of in-plant testing have proved that reinforced yarn packing with square hollow core will outlast conventional packing in application associated with excessive shaft deflection on large shaft.Hollow Core Packings are offered as per the suitability of the application and service.

• Made from Kevlar fabric and stitched with Kevlar threads (finger type hand gloves) • With inside woolen & FR Fabric lining • Heat resistance upto 550`C continuous working temperature and 850`C short term working temperature. • Size : 12" to 22"

Asbestos Graphite non-metallic packing is formed by interbraided method to from very dense and yet flexible packing. Each thread is impregnated into a solution with high lubrication value, the life of this packing is much then ordinary packing.

Asbestos Friction Sheet is a clutch facing material having a woven asbestos base with metallic inclusions in the form of brass wire. It is impregnated with an infusible bond capable of withstanding reasonably high clutch temperatures. It has a medium coefficient of friction, combined with good resistance to temperature and wear. WASM-80 is intended for use under dry operating conditions and is available in flat sheet form. Industrial clutches, marine gearbox clutches, tractor steering clutches, power press clutches, industrial brakes and other general engineering requirements in shipping, mining, port related and other industries

Very flexible and supple packing, excellent alternative to pre-formed graphite-rings. The benefits of this packing are low friction and excellent thermal conductivity. It can be used with steam, water, oils, alkalis, acids, solvents, paints, varnishes on pumps and valves in high temperature and high pressure environments prevailing in power plants, boiler houses, refineries, steel mills, petrochemical industries, etc.

Ceramic Fiber yarn, Rope, Cloth contains no organic agents or processing additives. It therefore retains its physical and chemical properties at very high temperatures and does not decompose into hazardous substances, as happens with many normal ceramics.

Specialities : Non-hazardous heat resistant fibre construction • 1000�C for constant duties, with excursions to 1100�C Etc.

Asbestos Centre Manufacturers ceramic fibre rope, braids, cloth tapes, and sleeving. Ceramic fibre textile products are made from alumina-silica ceramic fibre, free of asbestos. These non asbestos textile materials such as ceramic fibre rope can be used in different industrial applications under temperatures up to 2300 °F (1260 °C) and have excellent chemical stability and strong resistance to thermal shock and corrosion attack. Exceptions are hydrofluoric and phosphoric acids and concentrated alkalis. Ceramic fibre rope also resist oxidation and reduction. If wet by water or steam, thermal properties are completely restored upon drying. No water of hydration is present. Ceramic fibre rope contain 15% organic carriers, which helps to establish physical formation of products. The carriers burn out at about 750 °F (400 °C).    Ceramic fibre Cloth also contain reinforcement insert materials of either inconel wire or continuous fibreglass filament to increase handling strength during installation and enhance fibre durability to rated temperatures of 2000 °F (1093 °C) for inconel wire and 1200 °F (649 °C) for fibreglass filament. Ceramic braided packing includes Ceramic fibre rope are dense, high performance packing fabricated from ceramic fibre yarn braided around a core of ceramic fibre rope either to form a packing in Round or Square section of desired sizes. Applications of ceramic fiber cloth include : • Expansion joints• Safety blankets• Curtains• Welding blankets• Protective and insulating covers• Shields, gaskets, cable or pipe wrapping, etc. Ceramic Fibre Cloth has been widely used in welding, foundry works, aluminum and steel mills, boiler insulation and seal, shipyards, refineries, power plants and chemical plants. Available Size : 1.5mm, 2mm, 3mm, 6mmWidth: 40” (1000mm) 

Ceramic Fiber Cloth contains a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property. Ceramic Cloth is a woven fabric made from our high quality alumina silica fiber and especially mechanically needled for increased tensile strength and surface integrity in form of ceramic fiber yarn. It can be used for high temperature applications up to 2300 F. The cloth is reinforced with fiberglass filament, and optional Inconel/alloy steel wire. Ceramic fiber textiles (cloth, tape and rope) contain a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property. Typical applications of ceramic fiber cloth include :• Expansion joints• Safety blankets• Curtains• Welding blankets• Protective and insulating covers• Shields, gaskets, cable or pipe wrapping, etc. It has been widely used in welding, foundry works, aluminum and steel mills, boiler insulation and seal, shipyards, refineries, power plants and chemical plants. Recommended Working. Available sizes: 1.5MM, 2MM, 3MM, 6mmWidth: 40"

ceramic fiber cloth is a compression packing for very high temperature duties. It is manufactured from an exceptionally stable fibre material that is soft, non-irritating, non-hazardous & is not limited by world health organisation or european union restrictions. these heat resistant fibres are produced using advanced chemical fibre technology. They are spun into a flexible yarn in the uk, together with a low percentage of glass fibre and inconel wire reinforcement. ceramic fiber yarn, rope, cloth contains no organic agents or processing additives. It therefore retains its physical and chemical properties at very high temperatures and does not decompose into hazardous substances, as happens with many normal ceramics. compression packing of ceramic fiber product hi-temp are recommended for very high temperature static sealing duties or slow rotary applications. It replaces ceramic yarn packing and radiation seals on bos plant, and ceramic packings and vessel lid seals on secondary steelmaking plant. other examples include door seals for annealing furnaces at steelworks, kiln packings, protective surfaces on pottery kiln cars, and stem gland sealing on valves handling very high temperature gases. ceramic fiber textile resist hi-temp include braided insulation sleeves, webbing tapes, ladder tapes, twisted ropes, lagging ropes, blankets and paper, and woven cloth. These are used for thermal insulation and heat resistant duties where flexibility and resilience are required. prime features :• non-hazardous heat resistant fibre construction• 1000°c for constant duties, with excursions to 1100°c• competitively priced alternative to normal ceramic fibre packings• far better value for money than other non-hazardous high temperature materials, such as those made of pure silica fibre• good chemical compatibility  health & safety considerations :average diameter of the mineral fibre used in ceramic fiber product hi-temp is 9µm which is considered non-hazardous to health. No protection for breathing, eye, hand or body is required by the world health organisation or european union during the product's normal storage, handling and use. please note that normal ceramic fibres, as often used in the manufacture of very high temperature compression packings, are around 3µm diameter. These much finer fibres are now considered hazardous to health, with who and eu restrictions applied to the products that contain them.  

ceramic fiber blanket is a needled blanket made from our ceramic fiber. the blanket is lightweight, flexible and available in a wide variety of thicknesses, widths and densities. ceramic blanket resists temperature as high as 2300` f.this material is lightweight and has very low thermal conductivity, excellent handling strength, low heat storage, thermal shock resistance and corrosion resistance (commonly used acid and alkali).it also provides excellent sound absorption and excellent fire protection.  chemical and physical data:chemical composition:   al2o3:  47%, sio2: 50%; total al2o3 and sio2 >97% ; fe2o3:  < 1.0%  fiber physical properties:   fiber diameter: 3 – 4.5 microns;  fiber shrinkage (1800°f, 3h):  < 3.5%            working temperature:      1,800° f for continuous use; 2300° f maximum specific heat (@2000°f): 0.27 btu/lb° f  available density & sizedensity: 64, 96 & 128 kg/m3)thickness: 1/4", 1/2", 1", 1-1/2", 2" width: 24" and 48" packaging: in plastic bags and then in cartons typical applications insulation for steam and gas turbines, and other high temperature equipment repair, insulation and linings for furnaces, kilns, generators, reformers, boilers, etc. high-temperature pipe insulation, casting mold insulation, etc. fire protective insulation or linings insulation for nuclear applications and power plants high-temperature seals and gasketing, furnace door seals, expansion joint seals high-temperature filtration .

Thickness : 2

Ceramic Fiber Blanket is a needled blanket made from our ceramic Fiber. The blanket is Lightweight, Flexible and available in a wide variety of thicknesses, widths and densities. Ceramic Blanket resists temperature as high as 2300` F. This material is lightweight and has very low thermal conductivity, excellent handling strength, low heat storage, thermal shock resistance and corrosion resistance (commonly used acid and alkali). It also provides excellent sound absorption and excellent fire protection. Chemical and Physical Data: Chemical Composition: Al2O3: 47%, SiO2: 50%; Total Al2O3 and SiO2 >97% ; Fe2O3: < 1.0%

asbestos centre manufactures asbestos yarns in a wide range of constructions with a wide range of properties dependent on the various applications intended. However, they are commercially distinguished under the following groups:a) non-metallicb) metallic-incorporating metal wirec) union-in combination with cotton threads the size, diameter, or "count" of a asbestos yarn can be expressed in many ways. The modern international method used is the tex system. The "tex number" indicates the weight of yarn in grams per km. Of length.several ends of asbestos yarns can be twisted or braided to produce the yarn or rope of a higher diameter. The asbestos yarn can be reinforced with ductile metal wire such as brass, copper, zinc, lead, inconel, monel, stainless steel, etc. Reinforcement with filaments of metal wire offers particular properties in the end product such as heat dissipation, high temperature resistance, strength retention or particular friction properties. It can also be spun in combination with cotton or yarns made with man-made fibres to give an added advantage of higher strength and flexibility in lower temperature applications.asbestos yarn can also be treated with high quality lubricants, oil resisting compounds, ptfe and coated with flake graphite or mica for specific applications.   application :- asbestos yarn has a wide range of applications -in heat insulation, sealing, electrical insulations, fire protection, friction materials etc. The asbestos yarn is also used for packing valve spindles, lagging small pipes, sealing joints, in flexible metallic tubings, packing for bib- cocks at low pressure steam, sewing asbestos mattresses, in switch and fuse gear, braiding of electric cables, weaving of electrical resistance kits, cushions for glass in patent glazing bars.in addition to this, the asbestos yarn forms a base for the manufacture of packings, tubings and cloth, which services the wide ranging needs of any industry.

Asbestos Tape / Belt / Asbestos Webbing Tape Are used for wrapping of exhaust pipes, hot and cold insulation, electric cables, living switch boxes, drying oven, conveying hot articles in glass Industries, oil lamps and heater. Available in Metallic and Non-Metallic.

Twisted Asbestos Ropes: Several ends of asbestos yarns are uniformly twisted to produce very flexible ropes. Caulking Asbestos Ropes: A number of soft packings with various construction parameters to produce caulking ropes.

Asbestos PTFE Packing is formed by inter braided method from fine white asbestos yarn to foam very dense and flexible packing. Each thread is individually impregnated with PTFE lubricants.

we offer asbestos millboard that is fabricated from selected clean, long asbestos fibres of uniform quality assorted with suitable incombustible binding materials. These millboards are known for its features such as heat and fire resistance and strength. Our millboards are perfect at temperatures up to 500°c (932" f) and even higher temperature when properly supported. Additionally, it can be used acceptably at extreme temperature up to approximately 1400 c. These are also known for its features such as withstanding vibratory and impact loads easily. available is soft, medium and hard grades, these sheets can be cut, drilled and screwed to supporting beams, and can be moulded or cemented to any shape. The medium grade is supplied only if it is specially asked by our clients. The hard grade is stiff and brittle and is used where rigidity is needed. features :- • high temperature tolerance• strength• can easily withstand vibratory and impact load• available in various grades• acid, sound and vermin-proof• strong and flexible    packing method :- asbestos millboard is packed into wooden crates of approx 110 kilogramnumber of sheets in one crate varies according to board thickness.

Asbestos Lagging Rope is of the simplest forms of removable lagging or thermal insulating ropes.A fine canvas is often used as a weather proofing or finishing wrap on a Lagging Rope covered pipe, the canvas is then coated with bituminous heat resistant paint. Alternatively a wrap of roofing felt can be used

Size : 12mm to 50mm

Backed by a team of diligent experts, we offer high quality Asbestos Hood.It is a type of cloth to form pliable mineral textile with high tensile strength and high resistance to heat, flame, chemicals, and weather.