Autonics Temperature Controllers Dealers in Andheri East, Mumbai

• Brand Name: Autonics
• Weight: Approx. 150g
• Model No.: TK4S-B4CN
• Display: 4-digit 7-segment LED
• Control Method: ON/OFF control, P, PI, PD, PID control
• Sampling Duration: 50ms
• Control Output 1: Current(DC0/4-20mA) or SSR drive
• Option Input: CT, Digital(DI-1)
• Option Output: Alarm 1/2, RS485 comm.
• Power Supply: 100-240VAC
• Protection Structure: IP65(front panel)
• Hysteresis: RTD/Thermocouples: 1 to 100Deg.C variable Analog: 1 to 100-digit
• Proportional Band: 0.1 to 999.9Deg.C
• Integral Time: 0 to 9999 sec
• Derivative Duration: 0 to 9999 sec
• Control Period: Relay output, SSR drive output: 0.1 to 120.0 sec Current output or SSR drive output selectable: 1.0
• Manual Reset: 0.0 to 100.0%
• Ambient temperature: -10 to 50Deg.C, storage: -20 to 60Deg.C
• Ambient Humidity: 35 to 85% RH, storage: 35 to 85% RH
• Insulation Type: Double insulation or reinforced insulation

Digital Temperature Controller heat or cold generators (with manual and programmable automatic defrosting).Temperature display and adjustment. All purpose temperature controller. Front panel functions :- Relay ON Indicator. Defrost Indicator Alarm Indicator Timer Indicator Keypad Lock Indicator

• Type: Temperature Controller
• Color: Grey
• Voltage: 110V, 220V
• Condition: New
• Application: Indoor, Outdoor
• Display Type: Analog
• Theory: Bimetal Thermometer
• Frequency: 50Hz
• Driven Type: Battery
• Temperature Range: 0-100°C
• Feature: Auto Controller
• Certificate: CE Certified

PID Soft Start controllers are especially designed for hot runner coil heaters and tubular heaters. It is very efficient and economical. Multi zone hot runner controllers are made by individual temperature controller modules assembled in a cabinet. Soft start facility in this controller will help evaporate any moisture present inside the heater. The coil heaters have MgO content, and are therefore hygroscopic in nature. If kept unused for long periods, there is moisture deposition on the terminals. So we recommend de-moisturizing the heaters by preheating at 100° C to 120°C using controllers with soft start functions.   Maximum output power per zone – 3600 W Supply Voltage 230 V / 415 V – Three Phases Thermo couple input: universal type – (J) Temperature display – °C Indication of soft start, Load, T.C. open & T.C. Reverse Digital display for temperature       Customer just provide basic information about products, number of cavities and polymer ; then we will manufacture and supply entire parts of manifolds and Hot sprue bush or straight shot nozzles. Use as many bolts as needed to maintain rigidity. Keep back plate clamping bolts close to manifolds without expose to direct heat.

These are Units with Digital Temperature Indicator cum Controller. They are mounted in a Acid Alkali resistant PVC Polypropylene Body with suitable gasket to prevent fumes inflow into the body. The Units are complete with a PT 100 type Sensor which can be installed in the Plating Vat using Titanium or Glass Tubing. The Units are easy to install and maintain.

Radix Manufactures Temperature Controllers of all shapes, sizes and costs. Choose from Autotune PID Controllers, ON-OFF Controllers, Programmable Temperature Controllers, Digital Temperature Controllers and Blind Temperature Controllers. Most of our temperature controllers have universal input and can interface with a wide array of field instruments and signals. We have also incorporated Time-Proportional Control our controllers, a form of pulse-width modulation that makes a ON-OFF or discrete actuator mimic a continuous actuator. As useful is sensor break indication; our temperature 

PID Soft Start controllers are especially designed for hot runner coil heaters and tubular heaters. It is very efficient and economical. Multi zone hot runner controllers are made by individual temperature controller modules assembled in a cabinet. Soft start facility in this controller will help evaporate any moisture present inside the heater. The coil heaters have MgO content, and are therefore hygroscopic in nature. If kept unused for long periods, there is moisture deposition on the terminals. So we recommend de-moisturizing the heaters by preheating at 100° C to 120°C using controllers with soft start functions.

Temperature Controller, Fully Automatic Capacitance, industrial testing kit

Temperature Controller, Thermal Overload Protector, disc thermostat

Temperature Controller, FedEx Courier Sample and Commercial

Temperature Controller, Hot Runner System, Hot Runner Nozzles

Pid Temperature Controller, single phase control panel, VCB Panel

Temperature Controllers, Reactivation Powder, cleaning machines

Temperature Controller, programmable timers, Counters