Autonics Temperature Controllers Dealers in Mahim, Mumbai

• Feature: Membrane keypad for programming. Two set points for high and low set points. Control parameters settable in case of PID controller.
• Use: Plays a pivotal role in the process of electroplating of metals.
• One Relay Output: 230 V /6 A

• Brand Name: Autonics
• Place of Origin: Maharashtra, India

• Input: Thermal Couple K E J S
• Thermal Resistance:: Pt 100 Cu50

The XMT*3000 digital temperature controller can replace traditional display meter. It adopts three - positions keys to set freely and single 4 digit LED display. It has 2-on / off control , it is simple digital meter with control capability more reasonable . Range: K (0 to 1300 deg C); E (0 to 800 deg C)                               S (0 to 1600 deg C); J (0 to 1000 deg C)                                            Pt100 (-200.0 to 200.0; 0 to 600 deg C)                                Cu50(-150.0 to 150.0deg C) ·          Display: 4 digit LED display        OUT Indicator Light: When OUT is ON, a green LED light .        Set key (SET): Switches the setting mode and registers the                                     setting value and selected value .              Dec Key : Decreases numeric value of the setting value .               Inc Key : Increases numeric value of the setting value .  ·          Basic Error:  +/- 0.5 % +/- a dot of the total range of the input. ·          Control Output:  Relay contact   AC 250V    7A (impedance)  ·          Control Means: 2 - on / off control  ·          Power AC 220 V   (50/60 Hz )  ·          Work Environment: temperature 0 - 50 deg C, Humidity < 85 % RH, No corrode  ·          Size:  XMTG 48x48x90 mm   Hole 44x44  

Power 90 - 250 VAC, 47 - 63 Hz, 12VA, 5W maximum 11 - 26 VAC VDC, SELV, Limited Energy, 12VA, 5W maximum Signal Input Resolution: 18 bits Sampling Rate: 5 times second Maximum Rating: -2 VDC minimum, 12 VDC maximum( 1 minute for mA input )Temperature Effect: ±1.5 uV °C for all inputs except mA input ±3.0 uV °C for mA input Sensor Lead Resistance Effect: TC: 0.2uVohm 3-wire RTD: 2.6 °Cohm of resistance difference of two leads 2-wire RTD: 2.6 °Cohm of resistance sum of two leads Burn-out Current: 200nA Common Mode Rejection Ratio (CMRR): 120dB Normal Mode Rejection Ratio (NMRR ): 55dB Sensor Break Detection: Sensor open for TC, RTD and mV inputs, Sensor short for RTD input, below 1 mA for 4-20 mA input, below 0.25V for 1 - 5 V input, unavailable for other inputs. Sensor Break Responding Time: Within 4 seconds for TC, RTD and mV inputs 0.1 second for 4-20 mA and 1 - 5 V inputs

Digital Temperature Controller, Electronic Products, Automatic Stabilizer

Temperature Controller, event loggers, Steam Generator Controller

Temperature Controller, Temperature Monitoring Display, Large LED Display

Temperature Controllers, Automatic Cleaning Machine, Reactivation Powder