Bandsaw Blades Dealers in Mumbai

• Brand Name: Unique,simonds,Lenox,Nachi
• Blade Material: Hss. & M42 & M51, Carbidet tipped

Cost effective blades with positive & neytral rake angle tooth design for cutting variety of material.particularly suitable for tubes & solids.

Our Bimetal Bandsaw Blades (Platinum M51) is manufactured using HSS M51 edge material electrobeam that is welded to specially designed BIPICO Spirng Steel Backing Material. Our high quality Bimetal Bandsaw Blades has excellent wear and red hot resistance due to higher percentage of tungsten and cobatt. Our Bimetal Bandsaw Blades have proper distribution of dense hard carbide elements so as to give superior cutting performance.

Welding Process: - The Saw Blades or Wire Ends to be joined should be cut straight, exactly at right angles and free from burrs on special shearing attachment (optional equipment) - Welding Current, Upsetting Pressure and Upsetting Way are set according to the blade width - The blade ends are rigidly clamped in special quick acting clamps provided on the machine - By depressing the welding lever, the welding process begins - The two ends are heated to forging temperatures in a few seconds and are then automatically forged (upset). The welding current switches off automatically - The job is de-clamped and the weld completed Process for Annealing: The upsetting way switch lever is now turned to annealing and the job is clamped again with the extended jaw distance which comes in automatically on flipping the lever to annealing position. - By pressing the annealing switch on which two heat positions are provided, the job is annealed in order to normalize the brittleness of the welded area. - Depending on the type of material, the annealing process should be repeated several times if need be. Shearing Attachment (optional): Special shears with arrangement for mounting on the front of the machine are available Grinding Attachment (optional): Grinding attachment mounted on top of the machine is necessary for removing the welding flash

• Country of Origin: India

• Band width: 19 mm

Blade exclusively designed for the light-duty band sawing machines to cover a wide range of cutting applications. No Break-in procedure is necessary. Most cutting applications can be cut efficiently and economically with the DUOS 911 P. The problem of operators selecting the improper blade has been virtually eliminated by the DUOS. The DUOS uses two different tooth and set configurations to control excessive feeding in profile and tubing type materials.

With the help of our experienced engineers, we are bale to offer bi metallic band saw blade that is designed with the aid of latest technology. Being sturdy in construction and dimensionally accurate, these blades can easily sustain harsh wearing conditions and have long working life.

• Shape: Circular
• Packaging Type: Packet
• Usage/Application: Industrial
• Location: India
• Grade: M42 & M51
• I Deal In: New Only
• Features: Resistant to rust, User-friendly, High quality

We are a trusted Exporter and Supplier of Broadband Bimetal Bandsaw Blades in Mumbai. The Broadband Bimetal Bandsaw Blades are powerful machines used for various purposes. Simonds' patent pending A8 tooth geometries provide optimum cutting performance across a broad array of applications and materials. The M42 high speed edge of the Broadband Bimetal Bandsaw Blades improves wear resistance and the oversized blade body increases beam strength, both leading to more cuts per blade. A8 Broadband Bimetal Bandsaw Blades were developed with end user input and the design has been proven across North America, South America, Europe and Asia. The Broadband Bimetal Bandsaw Blade is an all-purpose high-quality blade, well suited for cutting a wide range of alloys. Applications Of Broadband Bimetal Bandsaw Blades Steel service centersMedium and large manufacturersFabricators Tool & die shops Materials Used Carbon steelChrome steelTool steelDie steelStainless steelNickel base steel Features and Benefits M42 high speed edge improves wear resistanceOversized blade width increases beam strengthTooth geometries provide optimum cutting performance across a wide array of applications and materialsPlastic capping protects teeth against damage in transit and handling (1" and wider) Download

Boxer 8% cobalt General PurposeAs the name suggest these blades are perfect for cutting materials with moderate machinability and offer good value in maintenance shops and small fabrication shops. These blades are good for small and medium sized bandsaw machines and the variable teeth pitch can handle a wide variety of sizes. Applications Interrupted cuts: pipe, tubing, angle iron, channel Cutting applications: single piece, bundles, stacked pieces Materials: carbon steels, structural steels - A36 AMAZE M42 These blades are suitable for high production speeds on difficult to machine solids and heavy walled structures. The hardened and strong M42 teeth with a solid backing material cuts solids and heavy walled structures and its variable teeth's pitches can handle a wide variety of cross section sizes. Applications Solids Heavy walled structures Carbon Steels Alloy Steels Stainless Steels Medium to heavy production machines Splender M42 M42 cum grade is known for it's dependably for superb strength to cut mild to tough materials. It can also effectively cut layers and bundles of large profiles and solids. Boasts of excellent performance in a wide range of materials and is a consistent performer with exceptional tooth durability and fatigue resistance Applications Production cutting materials ranging from Carbon to Stainless Steel Layer & Bundle Cuts for cutting Carbon Steel & various kinds of Alloy Steel, Tool Steel & Stainless Steel Large Profiles & Solids of Carbon Steel, Alloy Tooth Steel and Stainless Steel Triumph M51 Highly fatigue resistant to eliminate premature brakeage. Excellent in solid tool steels and small to medium stainless and nickel based alloys. These blades have special high speed steel tooth edges along with a superior alloy steel backing material. Because of the high quality of these blades a fewer blade changes can be done to cover a wider range of materials resulting in lesser downtime.These blades are the finest choice for cutting exotics, stainless steels and large solids. Applications.   High Production Cutting Solids of Tool Steel Small to medium solids of stainless steel (SS 304/316) Nickel Based Alloys, Inconel & Monel All Machinable Metals in single pieces or bundles High production cutting Stainless steels Exotics, Inconel, Hastalloy

Bi-Metal Bandsaw Blades made of cobalt alloyed HSS-M42-, suitable for all kind of steels, also for high alloyed ones and for steels difficult to cut with a tension force of up to 1.400 N/mm2.The high content in the HSS-tooth tips permits the teeth to be fully hardened up to 67 - 69 H Rc, this leads to a higher resistance against heat and wear and at the same time to an impressive performance.

• Brand Name: Business Tools Centre
• Dimension (LxWxT): 3000mm*27mm*0.90mm
• Shape: Rectangular
• Application: Metal Cutting
• Material: HSS

• Features: Easy to operate, Optimum performance, Rugged design, Sturdiness, Perfect finish, Rust free nature.

• Brand Name: Tata Bhusan
• Material: Hardened & Tempered Steel
• Shape: Roll
• Usage/Application: Industrial

Description: Bimetal Blade of M-42 grade with variable tooth pitch Positive Rake Angle Blade made of 4%-chrome-tempered steel Tooth tips with high Cobalt and Molybdenum content are of 68-69 HRC hardness These blades facilitate high cutting rates and longer lifetime The blades ensure optimal wear resistance and highest possible dynamic load capacity   Materials suitable to cut: Structural Steels, Deep Drawing Steel, Machining Steel Case Hardened Steel, Spring Steel, Tempered Steel Low Alloy Hot Working Steel, Unalloyed Tool Steels Nitriding Steel, High Alloyed Hot Working Steel Cold Working Steels and High Speed Steels Rust and Acid Resistant Light Steel Cast Iron, Nickel Based Alloys, Copper, Aluminum, Brass

We offer high performing Bimetal Bandsaw Blades that are sourced from the trustworthy vendors. High Efficiency Bi-Metal Bandsaw Blades offered by us are available in various specifications to meet the different demands of the clients. Our High Efficiency Bi-Metal Bandsaw Blades are manufactured from the finest quality raw materials that assure their high strength. We are well reckoned as one of the distinguished Bimetallic Bandsaw Blades Exporters, based in India. Bialfa Cobalt - For all materials with tenzile strenght up to 1400 n/mm2 (44 HRC) Bialfa Cobalt WS - For all materials with a tension, especiallyi for Structural Steels WS Alu for Aluminium - For Cutting Gates and risers, as well as for plates and Bars with a Si-content below 7% Bialfa Cobalt M-51 - For Stainless Steel and Acid Resistant Steel, Nickel Alloys, Titanium and material upto 50 HRC HM-Titan ALU - For Aluminium Castings,l Plates & Bars Rontgen Grit - For Ceramics, Glass, Tyres, Graphite, Stone, Fragile Cellular Structures in Aluminium Alloys or non-Metalic components).

• Size: 0-3inch, 10-13inch, 13-15inch, 3-5inch, 5-7inch, 7-10inch
• Type: Band Saw Blades
• Color: Black, Brown, Grey
• Material: Stainless Steel
• Usage: Wood cutting
• Application: Cutting
• Weight: 1-2kg, 100-200gm, 200-400gm, 400-600gm, 600-800gm
• Condition: New

• Type: Band Saw Blades
• Certification: ISO 9001:2008
• Color: Grey
• Application: Cutting
• Weight: 1-2kg
• Condition: New

• Material: Stainless Steel
• Thickness: 0.56mm/0.65mm
• Finishing: Coated
• Blade material: Alloy steel
• Width (inches): 10/13/16mm/19mm/30mm/35/mm40mm
• Features: High speed cutting