Battery Testers Dealers in Mumbai

• Type: Battery Monitoring System
• Certification: CE Certified
• Color: Black
• Voltage: 2V/12V/24V/48V Batteries In Series
• Condition: New
• Display Type: Analogue/web server display
• Feature: Accuracy, Easy To Fit, Measure Fast Reading, Robust Construction

We manufacture customizable  battery monitoring systems and have supplied these systems for naval and ground defense applications, electric vehicles, inverter manufacturers, solar applications, etc. 

We Offer Battery Charge Monitor BCM-01 is a micro controller based unit, which is used for monitoring the charge level of stationary battery systems. This unit measures the voltage drop across a shunt through which the battery is connected to the charger and the load. The unit displays the charge remaining on the battery in terms of Ampere- Hour (AH) capacity as well as remaining time for which the battery can supply rated current. The unit incorporates precision analog and digital circuits and has the following features Feature Ø A settable low charge alarm Ø Display of the charge on the battery as AH and Remaining time for complete discharge. Ø Field Setting of the Rated battery capacity in AH. Ø Field setting of the shunt rating. Ø Remote Indication of fully charged Battery condition. Ø Soft calibration – no trimpots. Ø Optional- RS 485 Modbus link for PC connectivity. Ø Optional Ethernet connectivity for networking. Ø Operates directly from the battery being monitored. Ø User friendly LCD display messages. Ø Field setting of Battery efficiency.

IM2505 is a charge discharge type Ampere Hour Meter which is best suited for tracking monitoring battery AH in circuit. These are used in applications related to submarine and telecom or in sectors where battery back ups are used; since battery charge is to be monitored to switch on off charger. It helps load to avoid excessive charging as well as deep discharge. When battery is being charged, the AH count will increment. When batterystarts discharging, AH count will decrement. When AH reaches the lower set point, relay will operate. This can be used to either generate warning alarm or switch off discharge and or start charger. Relay will remain operated till battery is charged to its full level.

• Color: Black
• Battery indicator: Digital
• Size: Standard
• Shape: Round
• Application/used: Automobile

i. Indication of b.a.c.(full 3 decimals) 0.000 to 4.000 ‰ or 0.000 to 0.400%bac or 0.000 to 2.000 mgl brac by led display ii. Sensor - fuel cell type alcohol sensor iii. Accuracy - ±0.005%bac at 0.100%bac iv. Mouthpiece - use v. Power - two 1.5v "aaa" size alkaline batteries vi. Weights - 100g (including batteries) vii. Dimension(mm) - 116 (height) x 50 (width) x 20 (thickness) viii. Audible warnings - 3 steps beep warning of alcohol detection with lcd display ix. Ambient conditions storage : 5 to 50 ºc operation: 5 to 40 ºc x. Available colour - black xi. Certificate - ce, dot, australian standard  

• Application: Industrial
• Warranty: 1 Year
• Weight: 860G,850G
• Model Name/Number: LCD DISPLAY BATTERY TESTER,DIGITAL CAR BATTERY TESTER ANALYZER 6V 12V
• Rated Voltage: 12 Volt
• Brand Name: VANNEL
• Power Supply: BATTERY VOLTAGE,6V 12V
• Rated Capacity: 2 - 200 Ah, 80AH
• Accuracy: 40Ah-200Ah
• Minimum Order Quantity: 5 Piece

Battery failure is often the common cause for the sensor or instrument failure. Simple to use, portable universal battery tester for the standard and rechargeable batteries.

The company is a notable Solar Cell Tester supplier , Manufacturer and Exporter . Solar Cell Tester is used for testing and sorting of solar photovoltaic cells. Our Solar Cell Tester is controlled by computer, which examines the electric performance of photovoltaic cells under the simulated sunlight. The calibrated reference cell on the test plain is used for monitoring the intensity of the light. Our highly advanced Solar Cell Tester is designed and developed as per the international quality and norms. Production Mode Solar Cells can be sorted on one of the Parameters Iload, VLoad, I max, Pmax I-V Mode I-V Curve Short Circuit Current , Open Circuit Voltage Load Current at Fixed Voltage Maximum Power (Peak Power) (Imax) Current & Voltage at Peak Power Fill Factor, Cell Efficiency Module Temperature & Corrected Temperature Solar Insolation, Date and Time of Measurement

• Power: Two 1.5V
• Indication of B.A.C.(Full 3 decimals): 0.000 to 4.000 % or 0.000 to 0.400%BAC or 0.000 to 2.000 mg/l BrAC by LED display
• Sensor: Fuel cell type alcohol sensor
• Accuracy: ±0.005%BAC at 0.100%BAC
• Mouthpiece: Use
• Dimension in mm: 116 (height) X 50 (width) X 20 (thickness)
• Audible warnings: 3 steps beep warning of alcohol detection with LCD display
• Ambient conditions: Storage : 5 to 50 ºC Operation : 5 to 40 ºC
• Available color: Black
• Certificate: CE, DOT, Australian standard

• Size: single pulg-in module 100x10,5x30mm
• Resolution: 16 bit
• I Deal In: New Only
• Number of channels: less than or equal to 10
• Isolation Voltage: less than or equal to 1400V

Determines health of lead-acid cells up to 2000 Ah   On-line testing with Pass/Warning/Fail calculations   Measures impedance, interconnection resistance and cell voltage   Windows CE operating system with 32 MB of memory   Measures float and ripple currents   Includes PowerDB LITE Management Software

IM2505 is a charge discharge type Ampere Hour Meter which is best suited for tracking monitoring battery AH in circuit. These are used in applications related to submarine and telecom or in sectors where battery back ups are used; since battery charge is to be monitored to switch on off charger. It helps load to avoid excessive charging as well as deep discharge. When battery is being charged, the AH count will increment. When batterystarts discharging, AH count will decrement. When AH reaches the lower set point, relay will operate. This can be used to either generate warning alarm or switch off discharge and or start charger. Relay will remain operated till battery is charged to its full level.

• Application: Industrial, Laboratory
• Accuracy: 0.5%
• Weight: 30kg
• Discharge Current Range: 0-150A
• Battery Voltage Range: 96-140V
• Display: 5.7 Inch Touching LCD
• Altitude: Available Below 4000m
• Noise: 60dB

• Application: Car Use
• Color: Red
• Condition: New
• Driven Type: Electric
• Feature: Heat Resistance, Long Life, Non Breakable, Stable Performance
• Warranty: 5yrs

Based in Mumbai, Maharashtra (India), we are the preeminent Manufacturer and Supplier of Car Battery Testers. Produced as per the industry-stated norms & standards, our Car Battery Testers are performance oriented, durable, corrosion resistant and easy to use. These Testers are used to determine the amount of power left in automotive battery. We also provide Constant Current Battery Chargers, Automobile Battery Chargers and Motorcycle Battery Charger.   Features : Reliable performance Tough in construction Easy to use   Details : Range - 8-20 V and 0 - 150 A Suitable tor Battery Testing Size - 110 X 280 X 60 mm Price - Approx Rs 3,500.00 / Piece

Models : ABM18 Features : MECO ABM18 is a portable Automobile Battery Tester which can check the capacity condition of different types of Motorcycle and Motorcar batteries from 2 to 200Ah. The product consists of a DC Voltmeter, Load Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'FULLUP' (White), 'NORMAL' (Green),'RECHARGE' (Yellow), 'DISCHARGE' (Red) directly. Technical Specifications Rated Voltage of Battery to be Tested : 2, 6, 12V DC Rated Capacity of Battery to be Tested : 2 - 200Ah Weight : 500gms (approx.) Dimensions : 225 x 124 x 68mm (approx)

• Rated Voltage: 12 Volt
• Warranty: 1 Year
• Rated Capacity: 4 - 400 Ah
• Accuracy (%): 99%
• Display Type: Analog Only

• Features: Dust proof membrane keypad. 6 digit AH count. Shunt value programmable. AH / AM mode selection. Battery back up to retain count in case of power failure.
• Size : 96×96 mm depth 150 mm
• Output rated: 230 V / 5A
• Supply : 230 V AC / 110 V AC / 10-30 V DC / 48 V DC

AC mains 230V (optional 110V) cum internal rechargeable sealed maintenance free lead acid battery operated. Built in Battery charger. Selectable test voltages. Automatic external voltage detection and warning. Accurate and precise resistance measurement using ratiometric measurement technique. Automatic discharge of capacitive circuit, after insulation test. Protected against accidental connection to 230V440 AC supplies.

• Weight: 200 gms/pc

Battery & Component Testers, Watch Tester Blue, New Model, Small A Compact Quartz Tester. It is a unique tool with 5 functions and works on pencil cell. Supplied with instruction leaflet and probes. A) Quartz Analogue Tester with Audio Pulses. B) Works as a Gear Freeing Demagnetiser. C) Button Cell Tester. D) Crystal Tester. E) ECB Tester.