Blades Dealers in Sakinaka, Mumbai

• Size of Blower / Cyclone: 2 H.P

Plastic granulator blades Increases the output of your machine by 15 to 20%, Keeps the machine cool, Trouble free operation, Enables to use machine continuously for long durations.

• Application: Wood Cutting,Laminates Cutting,Channel Cutting,Billet Cutting,Rip Saw
• Feature: The raw materials used are heat treated,Highly durable,Resistant to corrosion,Sharp blades
• Material: Using steel with high strength.
• Brand Name: Neelyog
• Country of Origin: Mumbai
• Product Name: TCT Circular Saw Blade
• Condition: Good

We provide best quality TCT Circular Saw Blade that is manufactured using steel with high strength. Our TCT Circular Saw Blade comprises of sharp blade and is corrosion resistant. The TCT Circular Saw Blade is popularly installed in grinding machines. The tungsten carbide Circular Saw Blade, we offer can be availed in varied sizes and different specifications, catering to different clients� requirements. We take pleasure to be reckoned as one of the preeminent TCT Circular Saw Blade Manufacturers and Suppliers in India. Attributes : The raw materials used are heat treatedHighly durableResistant to corrosionSharp blades Application : Installed in grinding machines Used For : Wood CuttingLaminates CuttingAluminum CuttingChannel CuttingBillet CuttingRip Saw

• Features: Quality approved ,Breakage free ,Best finish.

• Type: Through Feed And Infeed
• Material: Tungsten
• Thickness: 0.8mm
• Length: Up To 1700mm
• Application: Cutting
• Color: Silver

Needle roller workrest blades are used for manufacturing small bearings, cages, injection needles, needle bearings etc. We manufacture blades with thickness as low as 0.5mm. Our these blades are well appreciated and demanded by our clients for more than a decade now.

Backed by efficient logistics team, we make deliveries of the goods in the set time span. Available with us in several grades and specifications, our products stand high on the counts of quality.

• Specialities: ATB 15° tooth with positive cutting angle.
• Machines: Circular saws,portable machines.
• Material: Soft and hard wood, unprocessed chipboard and plywood.

Enchanting our customers with our excellent performance, we have cemented our status as a top figure in the industry. As a Manufacturer, Supplier and Exporter, we proudly present Carbon Steel Surgical Blades to our customers. These are developed using the finest material and latest techniques in fulfillment with international standards. Our valuable customers can easily avail them from us in a given time frame at industry leading rates.

• Type: Veterinary Instruments
• Material: Stainless Steel
• Application: Veterinary Use
• Color: Silver
• Feature: Best Quality, Easy To Use, Fine Finished, High Durability, Light Weight, Rust Free Nature
• Surface Finishing: Polished
• Opening Style: Single
• Country of Origin: India
• Instruments Type: TEAT-VETERINARY USE
• Sale Rate / Piece Of Danish Pattern: 277.20
• MRP / Piece Of Normal Pattern: 338.00
• MRP / Piece Of Danish Pattern: 292.00

• Size: Small, Medium, Large
• Blade Material: Aluminum

The Raw Material I.E. Frp And Aluminium Provides The Desired Non-Corrosive Quality To The Fan Blades, Resulting In The Operation Of Fans Even In The Chemical Environment. Frp Is Lightweight Material Which Ensures Low Moment Of Inertia, Minimum Wear & Tear Of Motor, Bearing And Drive System.Detail : The Basic Purpose Of Fan Is To Move A Mass Of Gas Or Vapor At The Desired Velocity. For Achieving This Objective, There Is Slight Increase In The Gas Pressure Across The Fan Impeller. Sgct Manufacture Fans With Fan Blade Choice Of Correct Twist And Of Special Airfoil Sections To Reduce Compressibility Losses.

Industrial Blades, Shearing Machines, Shearing Blades, Shearing Machine

At GEFI, improving the razor blade is our passion—sometimes we’re evolving it and sometimes we’re revolutionizing it. The best blades that we produce today will provide up to smooth and soft shaving experiences. Quality razor blades are really hard to make, and historically a couple of major brands have controlled almost all of the world’s razor blade factories. They’ve used that position to earn huge profits by selling razor blades at really high prices. That changes today. GEFI is now the only brand in the world that makes blades and sells them directly to you. And we’re committed to selling you our blades for a fair price, so you can get the great shave you deserve without ever overpaying again. Our expertise team has been grinding high-grade steel into some of the world’s sharpest blades. Today, best of our engineers, designers, craftsmen, and production workers build and operate sophisticated, custom equipment that produces millions of precision blades per month. We’re excited to partner with our new team to innovate and continue to make the fine blades you deserve. Our blades will get even better. Your shave will get even better. We’ll listen to your feedback about what makes a great shave and create products that deliver you that experience. In the end, we hope you’ll enjoy shaving even more.IMPORTANT INFORMATION Wake your skin up 1. Avoid shaving as soon as you wake up in the morning. By giving your skin time to “wake up,” you’ll allow it to lose the "puffiness" that happens due to fluid accumulation during the night, allowing you to get a closer shave. 2. Before you shave, make sure to wet the shaving area with warm or hot water. This will cause your hair shaft to swell, allowing the blade to cut your hair and not your skin, preventing infections in case of nicks. 3. You may want to exfoliate using a cleanser or scrub to eradicate dead skin cells. This will better prepare your skin for shaving. Soften your Beard 1. Soak a facecloth in warm water and hold it to your face for 30 seconds. This will help soften and loosen the hair and skin. Lather your Face 1. Put a ball of shaving cream on your palm and apply it evenly over your beard and neck in upward circular motions. Thoroughly massage shaving cream into your stubble. Make sure to uniformly cover all areas of your face that you wish to shave. 2. Try and use a vitamin and Aloe Vera-based cream as this will protect your face from razor rashes and burns while providing you with a close, soothing shave. Choose your Blade 1. Always use a sharp blade to avoid cuts; a dull blade drags instead of slides over your face and catches your skin along with your beard. Rinse the blade in hot water as often as possible. Don’t hurry, use slow short strokes. Just Shave 1. Shave in the direction that your hair grows on your face. This will eliminate redness, rashes, razor burn and ingrown hairs. 2. The top section of your beard: Shave from the top of the beard to the edge of your jaw-line in long, even strokes. 3. Your neck and chin: Shave from the bottom of your neck upwards (with the grain) to prevent razor burn and ingrown hairs. 4. Getting a closer shave: Try pulling your skin taut with your free hand while shaving. 5. Your upper lip: Stretch it over your front teeth to tighten the skin and remember to shave downwards. 6. Rinse your razor after each stroke to keep it from becoming clogged with hair. Take a closer look Wash off excess shaving cream with warm water, and look for sections you may have missed. Wet your razor to shave these remaining sections. Moisturize 1. After shaving, use a toner (preferably containing vitamins, aloe extract, etc.) or after-shave. You could also try an oil-free moisturizer to soothe and protect your face after shaving. 2. If an after-shave lotion is what you use, check the label for alcohol content. Please note that dryness and stinging sensations are caused by most after-shave products that have alcohol as its primary ingredient. Although it may feel good initially, it could turn out to be a minor irritant later.

• Color: Silver
• Application: Commercial
• Brand Name: Kristeel
• Shape: Rectangular
• Thickness: 0.2 mm
• Packaging Type: Box
• Technique: Laser cutting or Photo chemical etching
• Material Grade: SS 304
• Country of Origin: Made in India
• Blade Material: Stainless Steel

• Thickness: 7mm
• Material: Carbon Steel
• Hole Size: 14x57
• Type: Rotavator Blades

We manufacture Paper cutting knives for all Imported Paper cutting machines like POLAR, SEYPA, ITHO, PERFECTA, WHOLEMBERG, SUDARSHAN, HYCUT, ROBOCUT, SCHNEIDER or any other machine . Most of the knives for these above mentioned machine are in ready stock Knives for Three Trimmer set (Perfecta, muller martin machine, etc)

• Feature: Carbon steel and stainless steel blades Smooth tip/edge of the strip blade Patented strip-blade doctoring system for perfect low pressure doctoring Extraordinary straightness and flatness for low pressure doctoring Etc

All AkeBoose doctor blades have been carefully selected from the highest qualities of Swedish strip steel for perfect doctoring in flexography and rotogravure printing. Doctor blades offerings include round edge doctor blades and lamella edge doctor blades of a large variety of dimensions and qualities of carbon and stainless steel. The 10 mm wide AkeBoose doctor blades and the AkeBoose back-up blades are specially designed and strongly recommended to be used together with the AkeBoose doctoring systems.

Grinder/ Granulator Blades/ Agglo Blades Nirav Enterprise has gained recognition as one of the distinguished manufacturer and supplier of Grinder, Granulator Blades and Agglo Blades. We provide quality granulators blades for plastic and packaging industries for both domestic and international customers. The material required for these Blades is being carefully selected from the wide range of steels on the working edge and good quality steel at the base. These products are available in standard as well as customized options to meet the varying needs of our clients spanning all over the country.   Key Features Reliable Smooth functioning Precisely designed Durability

• Brand Name: Plant Power
• Size: 4 Inch (110 mm)
• Teeth: 30
• Bore: 20 mm
• Model: Standard

• Manufactured from high carbon steel raw material.• Suitable for all relatively soft material such as alluminium, copper, brass etc.• Powder Coated Finish

axial flow fans for cooling towers from 2’ to 33’diameter. The blades are adjustable pitch, high efficient aerofoil design. The fan blades are either of cast aluminum alloy or FRP (Fibre reimforced plastic) . The resin used for FRP blades is either vinyl ester or epoxy grade . Wear resistant lining is provided on the leading edge of FRP blade. The fan hubs are available in cast iron , hot dip galvanized steel and stain less steel grades. Smaller fans are dynamically or statically balanced. However , in case of large fans, hubs are statically or dynamically balanced and each blade is moment balanced. Match marking is done on each blade and on fan hub. The fans are selected optimally to obtain high efficiency based

• Brand Name: CMT
• Usage: Industrial
• Size/Dimension: D210X30XZ48

• Size: 0-3inch, 10-13inch, 13-15inch, 3-5inch, 5-7inch, 7-10inch
• Type: Band Saw Blades
• Color: Black, Brown, Grey
• Material: Stainless Steel
• Usage: Wood cutting
• Application: Cutting
• Weight: 1-2kg, 100-200gm, 200-400gm, 400-600gm, 600-800gm
• Condition: New

• BRAND: Anupam
• Dimensions: 10 × 5 × 5 cm
• Packing Size: Pack of 10 Pieces

• Color: Gray
• Material: Rubber
• Usage/Application: Screen Printing
• Features: Easy to use
• Thickness: 5mm

Doctor Blades are an essential part of commercial printing. In rotogravure printing the doctor blade removes the excess ink from the smooth non-engraved portions of the image carrier and the land areas of the cell walls. Doctor blades are also used in other printing and coating processes, such as flexo and pad printing for the same function. We supply doctors blade in huge quantity.

Packaging Machine Blades, Machine Metal Wheel, VMC Machine Pinion Shaft

We are offering diamond segmented saws for cutting refractory bricks.

We are Offering Hot Circular Saw Blades. the Hot Circular Saw Blades Offered By Us are Used in Varied Applications like Cutting of Iron & Steel Billets, Rails, Blooms, Profiles At More Than 700°c Temperatures. Besides, the Hot Circular Saw Blades are Available with Varied Tooth Profiles as per the Requirements of the Customers. attributes : special Steel Used, Excellent Grounding On Both Surface, Diameter Up to 2000 Mm, Fully Hardened and Precisely Milled Teeth, Thickness Up to 12mm.

Doctor Blade, Led Wall Washer Light, LED Down Light - 11W

Hollow axial aerodynamic composite blade design - for high strength to weight ratio.Periodic checks & maintenance done on mould - for reliable aerodynamic profile of the blade.Snout shape aluminium tip design, to reduce noise and air turbulence, and increase generation output.