Back Back
GMP Model BOD Incubator
Get Price Quote
Bod Incubator
95,000 - 350,000 Per Piece
1 piece (MOQ)
Biological Oxygen Demand (BOD) incubators are popular low temperature incubators suitable for growing yeast and mold. They are designed to maintain a minimum temperature of 200C, which is essential for BOD determination. BOD tests are used to determine relative oxygen (O2) requirement of microorganisms in effluents, polluted water and wastewaters. HMG India's potent BOD incubator offers controlled conditions for storage of vaccines, sensitive cell cultures, seed germination, serum incubation and culture of bacteria. In recent times, strict enforcement of environmental measures by regulatory agencies has forced several agencies to test and treat the wastewater, and this can be simplified with our exceptional range of BOD incubators. Apart from wastewater management, industries such as research laboratories, pharmaceuticals, beverages and agriculture can also benefit from the use of BOD incubator. What are the specifications? Inner Stainless Steel (SS) Chamber Outer CRCA/ GI Epoxy Coat Finish 3inch Thick Glass Wool Insulation How is the standard design? The outer core is made from CRCA / GI and coated with EPOXY powder for seamless finish The inner chamber is made from 100% highest grade S. Steel The doors of the inner chamber are created from tempered glass to reduce contamination and eliminate crevices High grade PUF insulation in situ form to achieve stable temperature What are the features? Full-view plexi-glass inner door to inspect and monitor the specimens present in the inner chamber without disturbing process temperature. Forced air circulation (FAC) by coaxial blower, that maintains preferable temperature, homogeneity and uniformity Microcontroller cum indicator with PID based system for accurate calibration of temperature to required settings. Illumination lamp equipped in the chamber for better visibility Portability of BOD incubator made easy, thanks to the mounted castor wheel High Pressure in-place insulation between the inner chamber and the outer wall for minimal loss of heat. Temperature range of 60°C and the ambient temp is +50°C ISI marked hermetically sealed compressor coupled with motor, fan blade and electrical accessories for rapid cooling. Finned SS Tubular heaters that facilities in uniform distribution of heat around the inner chamber. What are the optional accessories? Stainless Steel (SS) removable trays Safety Thermostat Strip Chart Recorder Chamber illumination powered by U.V. or white florescent lights 0 to 24 hours cyclic time for regulating illumination in chamber
Best Deals from Bod Incubator
Bod Incubator
Get Price Quote
1 Unit (MOQ)
The BOD Incubator which we manufacture is built with a double walled construction. The Low Temperature BOD Incubator available with us has an outer body of mild steel with powder coat finish. It is fitted with Vertical Model Front opening door with magnetic full flap gasket to minimize the heat loss. Our BOD Incubator is widely appreciated for its high quality and precise results. The inner full length glass door for viewing of specimens without disturbing inside temperature is provided with our BOD Incubators. We are well place among the topmost Bio Chemical Oxygen Demand Incubator Suppliers.Features : Rear mounts motor with blower for air circulation & uniformity Top mounted control panel for easy access Solid State Digital Temperature Controller & RTD - P.T 100 Sensors Double Wall S.S. Tubular heating element Illumination in chamber S.S. Rods made shelves with adjustable runners Digital Timer with temperature indicator. Printer interface available. SS shelves or racks can be provided on demand. Equipped with CFC free refrigerants and air- cooled compressors, the instrument performs conditioning procedures required in various industries. The Humidity Chamber comes with aerodynamically shaped fans for maintaining heating, cooling, humidification and dehumidification efficiency and provides environmental simulations.Capacity 18" L X 18" W X 18" H 90 LTRS 20" L X 20" W X 28" H 175 LTRS 20" L X 22" W X 34" H 225 LTRS 24" L X 24" W X 36" H 280 LTRS 24" L X 24" W X 38" H 320 LTRS
Bod Incubator
Get Price Quote
FEATURES : Designed for Biochemical Oxygen Demand (B.O.D.) Determination and other applications like preservation of vaccines, storage of sensitive cultures, microorganism, serum incubation etc. Double walled construction with backside triple, having Stainless Steel - 304 grade Interior & Exterior CRCA Steel with Powder Coat finish. Interior made of Stainless Steel–316 grade and Exterior of Stainless Steel 304 grade matt finish in all GMP Model. Castor wheels for easy movability. Units are highly insulated by Glass Wool between the walls to minimize the heat exchange. A key lockable Insulated door having magnetic gasket seals door gaps perfectly. A transparent full length Acrylic inner door is provided to have a clear inner view of the samples/specimens put in, without disturbing the Thermal Conditions inside the incubator. Illumination lamp fitted for clear visibility. Mechanical convection system (Motorized Blower) ensures even air distribution within the chamber. Heating by long life 'U' type S.S. tubular heaters. Cooling is done by CFC Free Hermetically sealed Emerson Copland make compressors utilizing R-134 A an eco-friendly refrigerant. Adjustable & removable SS rod type shelves. Temperature controlled by Dual Display Microprocessor based PID Temp. Controller with & PT – 100 sensor.
Bod Incubator
Get Price Quote
BOD Incubator is designed primarily to meet requirement of chemical oxygen demand test equipment are suitable for closed control of incubation temperature. We are a renowned BOD Incubator Manufacturer, Supplier and Exporter from Mumbai, India. We offer these BOD Incubators in varied grades and specifications as per the demand of the clients. Construction : The unit is a double walled chamber, with glass wool insulation. Interior is made of stainless steel and exterior is mild steel powder coated finish. The unit has full-length glass door and outside metal door with magnetic gasker and lock. The unit is provided with perforated stainless steel trays. The unit consists of main switch, digital microprocessor temperature controller with PT-100 sensor, chamber light. Forced air circulation for uniform temperature, safety controller, Hermetically guard compressor and Castor wheels for easy move ability. The unit Works on 230 Volts AC and 50 Hz mains supply. Various Type Of Temperature Controls Offered (Standard Model) : Time proportional On/off controller-cum indicator Micro controller based PID controller cum indicator. Controller with printer interface as optional Controller interface through Rs 232 C/RS 485 for multiple networking Feature (Optional For Gmp / Ich Model) : ICH Guide Lines followed. S.S. Removable trays. HRC fuse for all controls. Optional Accessories : Strip Chart Recorder. 0 to 24 hrs Timer for regulating illumination conditions. Note : Guarantee ceased in case of non-use of suitable servo stabilizer & to be stored in A.C. Room. Due to continuous R & D model/specification may change.
Bod Incubator
Get Price Quote
Features: Precisely designed Accurate testing Reliability
Bod Incubator
Get Price Quote
1 Piece (MOQ)
“TEMPO” make BOD incubators are manufactured to comply requirement of industries. Specifically designed for the long term and stable continuous operation ideal for pharmaceuticals, biotechnology and research institutions for storage and incubation studies. Incubators to provide a condition for optimal growth of microbiology cultures, biological labs for the preservation of vaccines, serological and complement fixation tests, General low temperature uses in physical /chemical labs, R&D centre, quality control laboratory, general laboratories of industries, pharmaceuticals, chemicals, petrochemicals, oil & gas, cement, pulp and paper, fertilizers, defence, railways, paint etc.Standard ModelsInside S.S. 304 with mirror polish & Outside mild steel powder coated.GMP ModelsInside S.S. 316 with mirror polish & Outside stainless steel 304 with dull the buff finish.ConstructionBOD Incubator is made of double walled construction with thick high grade PUF insulation. Full view inner acrylic door & front door with gasket & locking arrangement. The motorized blower at backside of the chamber develops a unique air ow system to maintain uniform temperature condition inside the chamber. Unique air ow assures quick recovery after door openings. The unit is provided with a user friendly adjustable specially designed S.S rod trays ensure uniform temperature distribution. The equipment is mounted on castor wheels for easy movement.Technical Specification Controlling System : Microprocessor based autotune PID temperature controller with a dual display of set value & process value for precise control of temperature. Sensor : PT 100 sensor is used for sensing the temperature. Heating System : High quality S.S. tubular heaters are used for better heating. Humidity System : Steam injection system (non-condensing type) & reservoir tank with water level arrangement with indicator. Refrigeration System : CFC free hermetically sealed Emerson Copeland make compressor for better cooling with R134 A (eco-friendly) refrigerant with a time delay to safe guard compressor system. Validation Port : 50mm validation porthole with silicon rubber seal to insert sensor for validation. FeaturesFull view observation Acrylic door with a gasket to observe the sample inside the chamber. Interior illumination for working area. Specially designed stainless steel rod trays ensure uniform temperature distribution.Safety FeaturesSafety standby thermostat to cut off heater supply in case of overshoot of temperature. Inbuilt overload protector provided for the hermetically sealed compressor. Compressor ON delay timer (2 min) to safeguard the compressor.Optional Features PLC based control system Stand by refrigeration system. Ethernet / RS485 communication Data logger Data scanner complete with sensor SMS mobile alert system Door access security system Safety digital temperature controller Digital timer Safety digital temperature controller CFR 21 part 11 compliance software
Bod Incubator
13,000 - 43,950 Per Piece
1 Piece (MOQ)
Bod Incubator
Get Price Quote
We are one of the most reputed Manufacturers, Exporters and Suppliers of BOD Incubator in the market. Primarily designed to meet the requirement of Biochemical Oxygen Demand Test, the BOD Incubator can be used in various applications like Incubation, Serum Studies, Study of Enzymatic Digestion Processes, Tissue Culture, Preservation of Vaccines, Long Term Sample Immunological work, etc. The BOD Incubator that we provide is developed and designed by using the best quality components and parts. Our BOD Incubator is well appreciated for its excellent control and smooth functioning. Calibration & Validation We will provide the calibration certificate of the controller with trace ability of the Indian governmentâs approved agency. The company also does the validation of the chamber i.e. recording the temperature at different places in the chamber confirming uniform temperature throughout the chamber & no developing of hot & cold zones in the chamber. Construction The Inner chamber of the cabinet will be made up of Stainless steel & the outer wall will be of Mild steel sheet that is insulated between the two walls of 75-mm thick special quality Glass wool pad to prevent thermal losses. A self-cooled air circulation fan will be provided to maintain the uniform Temperature throughout the Chamber. Door construction A flush fitting insulated door has leak proof Magnetic Gasket with Lock & Key wears as Full-length inner door of acrylic, which allows a clear view of samples without loss of chamber condition during operation. Trays : Adjustable Perforated removable Stainless Steel shelves are provided along with the unit Circulation : Forced air circulation throughout the chamber for uniformity & accuracy Heating : Long Lasting stainless steel tubular heater is been used as heating element Heating element of Nichrome wire placed in air path duly insulated from body. Cooling A hermetically sealed compressor with evaporating coil & fan-cooled condenser provides efficient cooling in the chamber. The compressor is safeguard with time delay circuit & overload protection. The cooling system is placed at the bottom of the working chamber for easy servicing & for low noise vibration. Temperature sensing device : Temperature of the chamber can be sensed by Pt â 100 A Class sensors Control Panel The control panel will be on the top of the unit for easy setting of the temperature it will consist of P.I.D Based Digital Temperature Controller with Line, Mains, Cooling, Heating L.E.D. Bulbs & Push On / Off Button for inner chamber Illumination Temperature range : - +5o C to +50oC Accuracy : - + 1o C
Bod Incubator
Get Price Quote
Bod Incubator
143,000 - 415,000 Per Piece
KBI Range of Incubators allow efficient and economical general incubation work and temperature testing according to international Test Standards. They are outstanding in precision and reliability as well as in performance and styling. Construction and mode of operation: • Cabinet, double walled, exterior finished in powder coating epoxy paint. Door, right hand hinge, with magnetic gasket and lock, full length plexi-glass inner door. • Insulated with the most efficient insulation available today, provided for improved refrigeration performance. • Forced air circulation through built-in large size fan via baffle plates, gives constant positive air flow throughout the chamber, as well as fast adjustment of the specimen to circulating air temperature. • Air Tempering is carried out by a finned heater and finned tube heat exchanger cooled by hermetic compressor. • Control Panel carrying all the controls, indicators, switches, heat energy regulator etc. Is placed on the top of the cabinet. Controlling and Regulating: • Digital Display of actual value and set value with 0.1ºC Resolution allows exact control of temperature and repeatable setting of the same temperature value. The temperature in the chamber is measured with a high precision PT - 100 sensor. Controller: • The fully electronic temperature controller with two point sensors automatically select cooling or heating. It gives very high precision and an excellent response due to the built-in feed back. KBL Range of B.O.D. Incubators have additionally built-in illumination system comprising four 2 ft. Fluorescent tube lights housed vertically in the door and 24 hrs. ON/OFF cyclic timer for illumination control. Additional Features: • Automatic chamber light on opening of the door Performance Specifications: • Controllable range of Incubator temperature ; 5 to 60ºC • Accuracy of temperature control :±0.5ºC • Temperature variation throughout the cabinet : ±0.5ºC Performance Specifications: • 230V , single phase, 50 Hz. OPTIONAL: • Illumination system using flourescent tube lights for KBI models. • Programmable 24 Hrs. On/Off cyclic Timer for illumination control for KBI Models. • Electrical point inside the chamber. • Port holes for glass inlet. • Luxmeter.
Bod Incubator
Get Price Quote
1 Piece(s) (MOQ)
Salient Features Microprocessor P.I.D. Temperature control Digital display of temperature Safety Thermostat Over / Under Counter Design Construction Bacteriological Incubators by Krew Instruments Pvt Ltdare available with double walled construction which is fully insulated with polyurethane foam for cost-effective operation, offer a number of shelves within the unit for increased storage facility. CoolingImproved cooling system is an advantageous feature in the designs of Krew Instruments Pvt Ltd BOD incubators.DoorsThe doors belonging to the BOD incubators are available in stainless steel or glass. You can request for the type of door in case of a custom BOD design.SafetyFor optimum safety of preservation and storage, the units are well equipped with many precautionary safety measures to ensure no leakage or any temperature variation and loss of control.Temperature Range The BOD incubators come with temperature ranges from 00C to 600 C with an accuracy of +/- 0.10C. Cooling BOD Incubators and Laboratory BOD Incubators are especially designed to conduct life cycle testing, shelf life studies, general incubation and refrigerated storage. Temperature range adjustable from 5 – 600C with micro controller based temperature indicator cum controller. Chambers are extensively used for seed testing, biological studies etc. We are the leading BOD Incubator Manufacturer in Mumbai. Cabinet Construction and Refrigeration System The chamber cabinet comes insulated with an optimized high-density CFC free Poly Urethane Foam. The interior of the chamber is made with mirror finish surface of stainless Steel (304 SS, 0.8 mm thick) and the exterior with white powder coated (1.0 mm thick) mild steel. The door has a systematic magnetic door gasket with a single keyed door lock. The stainless steel trays are provided for storage inside. The perfect cooling is achieved by a hermetically sealed compressor unit of premium quality. Complete stainless steel (inside SS 316, 0.8 mm. thick with mirror finished and outside. SS 304, 1 mm thick) is also manufactured by us. Special Features Unique airflow system ensures even distribution of temperature. Foamed - in place PUF insulation ensures temperature stability and reduced energy consumption. Audiovisual alarm if the temperature deviates from the pre set temperature. Precise control of temperature by using CE approved micro controller based PID controller (Optional) (Imported, Auto tuning type). Refrigeration system with CFC free compressor and R-134a ecofriendly refrigeration system with time delay.
Bod Incubator
51,000 Per Piece
Bod Incubator
125,000 Per unit
Bod Incubators
Get Price Quote
KBI Range of Incubators allow efficient and economical general incubation work and temperature testing according to international Test Standards. They are outstanding in precision and reliability as well as in performance and styling. Construction and mode of operation: • Cabinet, double walled, exterior finished in powder coating epoxy paint. Door, right hand hinge, with magnetic gasket and lock, full length plexi-glass inner door. • Insulated with the most efficient insulation available today, provided for improved refrigeration performance. • Forced air circulation through built-in large size fan via baffle plates, gives constant positive air flow throughout the chamber, as well as fast adjustment of the specimen to circulating air temperature. • Air Tempering is carried out by a finned heater and finned tube heat exchanger cooled by hermetic compressor. • Control Panel carrying all the controls, indicators, switches, heat energy regulator etc. Is placed on the top of the cabinet. Controlling and Regulating: • Digital Display of actual value and set value with 0.1ºC Resolution allows exact control of temperature and repeatable setting of the same temperature value. The temperature in the chamber is measured with a high precision PT - 100 sensor. Controller: • The fully electronic temperature controller with two point sensors automatically select cooling or heating. It gives very high precision and an excellent response due to the built-in feed back. KBL Range of B.O.D. Incubators have additionally built-in illumination system comprising four 2 ft. Fluorescent tube lights housed vertically in the door and 24 hrs. ON/OFF cyclic timer for illumination control. Additional Features: • Automatic chamber light on opening of the door Performance Specifications: • Controllable range of Incubator temperature ; 5 to 60ºC • Accuracy of temperature control :±0.5ºC • Temperature variation throughout the cabinet : ±0.5ºC
Bod Incubator
50,000 - 500,000 Per Nos
1 Piece (MOQ)
Bod Incubator
45,000 Per Piece
1 Piece(s) (MOQ)
Bod Incubator
Get Price Quote
We are instrumental in offering high quality BOD (Biological Oxygen Demand) Incubator to the clients. Our BOD Incubator has castor wheel mounted on it, and is double walled with inner chamber of stainless steel & outer wall of M.S. sheet duly powder coated. Double walled back of the BOD Incubator is fitted with air circulation fan for maintaining temperature uniformity throughout the chamber. Full view of inner glass door permits inspection of specimens without disturbing the same. Lock & Key arrangement is provided in the double walled outer door. Our BOD Incubator is fitted with door operated illumination lamp inside the chamber, and the front panel is provided with separate indicator lamps for main, heating & incoming voltage. Features : Supplied with adjustable shelves, cord & plug to work on 220-230 volts AC supply Works at temperature range of 5oC to 60oC Accuracy ±0.5oC Temperature is controlled by digital temperature indicator – cum – controller
Bod Incubator
Get Price Quote
BOD incubator series is designed intelligently with its microprocessor controller to efficiently maintain low temperatures. Easy to clean stainless steel design and duct circulation system ensures temperature uniformity in working area. An ideal choice for BOD analysis of industrial effluents and sewage water and other applications. Basic Specification : Capacity: 70 L Temp. Range: 0-60°C Temp. Accuracy: ±0.5°C Temp. Fluctuation: ±1°C Temp. Uniformity: ±1°C
Bod Incubator
Get Price Quote
Features : Designed specially biological Oxygen demand determination and other application like general incubation, serum studies and enzyme assays tests. Castor wheel mounted cabinet is double walled. Inner chamber made of Aluminium / S.S Outer chamber made of M.S with powder coating. Full length inner glass / acrylic door permits inspection of specimens with out disturbing the temperature. Temp. controlled by Digital Temp controlled cum indicator. Temprature range 5 degree c to 50 degree c with an accuracy of 0.5 degree c. This unit is fitted with door operated illumination lamp inside the chamber. Equipped with vermitically sealed compressor. Air Circulation Fan for maintaining temp. Uniformity through out the chamber. Flush Fitting insulated double walled door has magnetic gasket. The Chamber is provided with modular removable shelves made of S.S for complete flexibility is use. Inner Chamber is fitted with refrigeration evaporator, heater and Air Circulator for creating positive. Air flow through out the inner chamber for Temp. Uniformity. To work at 230V A.C only.
Bod Incubator
Get Price Quote
BOD incubator exceeds the incubation criteria for biochemical oxygen demand (BOD)analysis, and easily fits under standard lab benches. Digital Microprocessor control with 150 & 250 Liter capacity having Illumination and non Illumination version available. 1.Microprocessor controller set for accuracy and reproducibility temperature. 2.Artificial intelligence system which maintains precise temperature by using MICOM. 3.Provide inner glass door for improved viewing of culture experiments without disturbance to cultures. 4.Easy to observe inside with inner door produced with strong glass. 5.Adopting the low noise and high effect compressor, stable experiment condition
B.O.D. Incubator
Get Price Quote
Bod Incubator
Get Price Quote
Details : Designed Specially for Biological Oxygen Demand Determination and other applications like General incubation, Serum studies and enzyme assays tests. Double Walled Construction, Std & GMP Models. STD Model : Inner Chamber SS, Outer MS Powder Coated Body. GMP Model : Inner & Outer Chamber SS 304 Grade. Mounted on castor wheels for easy portability. Full length inner plexi glass /acrylic door for inspection of specimens without disturbing the temperature. Temperature controlled by Digital Temperature Controller cum indicator. Temperature range 5 Deg. C to 50 Deg. C with an accuracy of 0.5 Deg. C This unit is fitted with door operated illumination lamp inside the chamber. Equipped with hermatically sealed compressor. Air Circulation Fan for maintaining temperature uniformity through out the chamber. Flush fitting insulated double walled door has magnetic gasket. Provided with removable SS Shelves for complete flexibility in use.
Bod Incubator
Get Price Quote
BOD Incubator is used for day-to-day bacteriological and bio chemical oxygen demand determination tests in various laboratory applications. We are functioning as BOD Incubator Supplier. We can provide BOD Incubators in various sizes and capacities.
Bod Incubator
Get Price Quote
We are the well known manufacturer and exporter of the top quality bod incubator in india. Our bod incubator is used in all types of laboratories such as physical, chemistry, biology, etc that are spread in all over the world. The range of bod incubator can be availed at affordable prices from us. available in models : standard & gmptemperature range : 5oc to 50oc with ± 1oc used for preservation of vaccines (insulin and liver extracts)serologicalcompliment fixation testsenzymatic digestion process features three adjustable anodized shelves (perforated) inside chamber material : anodized aluminumdouble action hydraulic type thermostat for temperature controlevaporator coil, sealed heating and thermostat sensing element in the air duct at the back sidedouble walled cabinet insulated with fine mineral wall of 75mm thickness'l' shaped prismatic thermometer (range : -0oc to 5oc) housing : outside-epoxy powder coated ms sheetnoiseless and protected compressor along with a fan cooled condensing coilfull view of inner acrylic door for inspectionillumination lamp operated by doorfor inside air circulation, f.h. Motor's two fanscontrol panel indicators : main, heating & coolingouter door construction: double walled fitted with magnetic gasketoptional device: electronic digital read out, timer and interior illuminationintegrated with voltage stabilizerfor above & below the room temperature, equipped with volt meter, temperature setting knob and selective switchpower supply : 220/230 volts (a.c.: 50 hz.)
Bod Incubator
Get Price Quote
The BOD Incubator which we manufacture is built with a double walled construction. The Low Temperature BOD Incubator available with us has an outer body of mild steel with powder coat finish. It is fitted with Vertical – Model – Front opening door with magnetic full flap gasket to minimize the heat loss. Our BOD Incubator is widely appreciated for its high quality and precise results. The inner full length glass door for viewing of specimens without disturbing inside temperature is provided with our BOD Incubators. We are well place among the topmost Bio Chemical Oxygen Demand Incubator Suppliers. Features Rear mounts motor with blower for air circulation & uniformity Top mounted control panel for easy access Solid State Digital Temperature Controller & RTD - P.T – 100 Sensors “CFC” Free Eco – friendly Cooling System S.S. Tubular heating element Illumination in chamber S.S. Rods made shelves with adjustable runners WORKING SIZE NO SHELVES 18" L X 18" W X 18" H 3 CFT / 90 LTRS 20" L X 20" W X 28" H 6 CFT / 175 LTRS 20" L X 22" W X 34" H 8 CFT / 225 LTRS 24" L X 24" W X 36" H 10 CFT / 280 LTRS 24" L X 24" W X 38" H 12 CFT / 320 LTRS
Bod Incubators
Get Price Quote
We are offering bod incubators.
Bod Incubator
Get Price Quote
Offers Bod Incubator. (temp. Test chamber) choice of s.s.or aluminium interior. Digital temperature controller. Temp. Range: 5°c to 60° c stability & uniformity:+-0.5° c capacity: 3,6,10,12,16 & 35 cu. Ft.
Bod Incubator
Get Price Quote
Bod Incubator
35,000 Per Piece
1 Piece (MOQ)
Filter by Localities
