Bombay Tools Supplying Agency Ganpatrao Kadam Marg, Mumbai, Maharashtra

Welding Gauge:It is intended for general dimensional inspection of welded fabrications where close tolerances are not expected.

The mini 2000 F.O. Viewing probe, manufactured from robust polyamid, is a handy instrument which is deal for the pocket with a weight of only 100g. With a direction of view of 0degree, the object inspected may be at a distance of up to 45mm.

We are offering vernier caliper. Most commonly used vernier reading type. Different models available with a fine-adjustment carriage to feed the slider finely. - minimum reading: 0.02mm, vernier caliper with an auto-stop function

USB, DC, Wireless Probes USB Probes:Product Name: USB Probes ± 2 mm, 4,3 mm range, Description: GTL21 USB probe ± 2 mm.

The UNIVERSAL ANGLE SPIRIT LEVEL 64 is particularly suitable for measurements on vertical surfaces and shafts The tubular level can, however, also be used for measuring on flat surfaces

The DELTA is hand held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic- and non-metallic materials e.g. aluminium, titanium, plastics, ceramics glass and any other good ultrasonic waveconductro as long as it has parallel top and bottom surfaces. The principle of ultrasonic wave in the thickness measurement is similar to that of optical wave. The ultrasonic wave pulses transmitted by the probe reach the object to be measured and propagate in the object and when they reach the interfaces, they are reflected back. The thickness of the object is determined by precisely measuring the time the ultrasonic wave travels in the object. To increase accuracy the DELTA is equipped with automatic gain control and Vpath error correction.

Lightweight vernier calliper to measure large applications upto 3 meters in length. Features include :- SYLVAC inductive measuring system, patented Digital display LCD. Internal and external measurement. ISelf-contained use: 3300 hours continuously. Operational speed: 2 ms. Stainless steel external jaws, thickness 7 mm, titanium coated Tungsten carbide internal pins Ø 5 mm. Hollow section aluminium beam reinforced by two stainless steel rods.

The Twin Blade Cutter is used to cut a slice on a Semi-Flexible or Semi-Rigid impression to measure the cross section of a feature on a profile projector or on a digital microscope. The standard model is composed of two parallel blades spaced 1mm apart over a usable length of 60mm. Other models can be made on demand.

The principle of ultrasonic wave in the thickness measurement is similar to that of optical wave. The ultrasonic wave pulses transmitted by the probe reach the object to be measured and propagate in the object and when they reach the interfaces, they are reflected back. The thickness of the object is determined by precisely measuring the time the ultrasonic wave travels in the object. To increase accuracy the DELTA is equipped with automatic gain control and Vpath error correction.

Electronic probe display units - up to 2 probes TESATRONIC probe display units:Product Name: TESATRONIC TT 10 probe display unit, Description: TESATRONIC TT10 portable display unit for TESA inductive probes.

Brand Name : Mitutoyo

Probes with axial movement, Ø 8 mm Standard Half-Bridge Probes:Product Name: Standard probes, ± 1 mm, 4,3 mm travel (GT21), Description: GT21 axial probe ± 1mm.

Split-ball probes are universal bore gauges for indicating internal measurements. The modular design with extensive accessories enables gauging of most common bores. This allows use for serial and individual control as well as preferentially in the plant directly at the production machine. Due to different styles through bores, blind bores, parallel distances, etc. can be gauged. Modular design system with extensive range of accessories, enables gauging of most bores. Application range: Ø 0.47 mm to 41.3 mm0.02" to 1.6" (in 3-point version up to 150 mm5.9").

WYLER ag located in Winterthur, Switzerland has a tradition of more than 75years in the field of precision inclination measurement. Thanks to the use of most modern technologies and the consequent and continuous development of new products WYLER has as international reputation as the leading company for high precision inclination measuring equipment and systems. The product range starts from precision spirit levels and goes to complex electronic measuring system including the correspondent data acquisition software.

The image is transmitted by a fiber-optic bundle. This is made up of a huge number of fine glass or plastic fibers. Image pixels are transmitted by individual fibers probes and are then re-aligned at the eyepiece to form the high-resolution image. Standard models include diameters of 4mm and 6mm with lengths upto 1000 and 2000 mm respectively Semi flexible endoscope length 1000mm and diameter 6mm. Flex and twist endoscope length 740mm and diameter 4mm.

It is fast, easy and economical to make replicas for measuring blast surface profiles. A unique replica technique and a simple snap gauge make possible accurate, low-cost blast surface profile measurements. It makes surface replicas easy to obtain and produces average maximum peak to valley readings that assure optimum blasting effectiveness. The film is available in thickness grades that covers the most common range of blast profile used in industry. Replicas can be stored for reference when needed.

The FRAME SPIRIT LEVEL 58 SPIRIT is suitable for measurements on vertical and horizontal surfaces and shafts Optional magnetic inserts in the vertical measuring base assure an excellent adhesion to vertical shafts and surfaces .

Special tapes to measure outside and inside diameter tapes, linear rule, GoNo-Go tapes, and custom specialty tapes for measuring O-rings and inside diameters of other soft-walled parts.

60° measuring angle.Measurement spot 8 x 16 mm 0.315 x 0.63 inch. Automatics measurement range selection gloss mirror gloss mode. Gloss measurement 0 - 150 gloss units. Mirror gloss measurement 150 - 1000 gloss units. Automatic calibration. Extraneous light compensation. USB interface.

(formerly NIVELTRONIC) equipped with two prismatic measuring bases in rectangular position to each other for measuring flat surfaces and shafts (diameters Ø 20 ... 120 mm) horizontally or vertically. The measuring faces are carefully hand scraped to obtain an extraordinary precision. This makes the instrument extremely suitable for adjustments or checks on rectangular geometrical elements of machine tools and structures.

MITUTOYO is the worldwide leader in precision measuring instruments. It offers the most comprehensive range in metrology equipment with excellent quality. BombayTools is the largest authorised distrubutor of Mitutoyo in India. BombayTools offers sales and support to make your enquiry as fast and efficient as possible. We market the entire range of Mitutoyo products from micrometers, digital calipers to profile projectors. We offer applications support, product support, product information and service for all Mitutoyo products.

Non-magnetic coatings, e.g. paint and zinc on ferrous substrates, Insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals. Wide range of wear-resistant probes which can be adapted to different applications. Universal probe for measurements on steel and non-ferrous meta. Storage and evaluation of measuring values.

Non-magnetic coatings, e.g. phosphate, paint, plastic on steel, Non-wearing permanent magnet, Measuring without power supply, No calibration required, Measurement of coatings up to 20 mm, High accuracy.

Regular product of outside micrometers - The frame is provided with a heat insulating cover. Coated frame type. Large-size micrometers are also available. - Measuring range: up to 1000mm in standard specification