Bond Tester Dealers in Mumbai

• Country of Origin: India
• Type: Peel Strength Tester
• Color: Blue and White
• Condition: New
• Brand Name: IKON INDUSTRIES
• Color: Blue and White
• Certification: Traceable to NABL
• Power: 5 AMP
• Voltage: 230 Volt
• Frequency: 50 HZ
• Display: Digital

We are offering product is a cationic polymer and improves ply bond and stiffness of duplex board. the product is to be added @ 2.0 kg per ton of pulp in wet end. besides this it also improves drainage on the machine.

• Earth Ground Resistance: 20/200/2000 ohm
• Usage: Industrial
• Weight: 750 g
• Dimension: 165 x 50 x 95 mm
• Storage Temp Range: 0-50DegC

We are the leading exporter and supplier of this products.

The NEW Internal Bond™ Tester is designed to determine the internal bond strength of a variety of Paper and Board materials according to TAPPI T 569. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The paper specimen is sandwiched between two double-coated tape substrates. The pendulum impact measures the total energy required to delaminate the internal fibers of a specimen in a "Z" type direction into two separate piles. The system also incorporates an automatic sample preparation station which allows five specimens to be accurately prepared simultaneously. APPLICATIONS Newsprint, Fine Paper, Liner Board, Book Stock, Carton Board, Medium, Coatings, Laminates FEATURES Storage and editing of up to 500 readings Selectable units (ft.lb/in², J/m² and kg•cm) RS-232 serial output Report printout with built-in printer Magnetic hammer release and magnetic brake Automatic calibration Automatic specimen hold-down during test sequence Settable limits, statistics-average, standard deviation, high/low results Automatic cutting of samples saves you time and keeps you safe 5.7 inch LCD color display with 320 x 240 resolution 15 Character alphanumeric keypad 6 function keys for easy test setup 10 soft key icons allow simple intuitive navigation of test functions Conforms to TAPPI standard T 569 Sample Prep Station A precision sample Preparation station with digital display and direct read out in kPa and psi units is available to prepare up to 5 test pieces at the same time. The Sample Prep Station is supplied to provide a consistent adhesive transfer when pressing the test specimen between the double-sided tape and aluminum platens. Included with the Sample Prep Station are 5 aluminum platens with a sample size of 25.4 x 25.4 mm (1.0 x 1.0 inches). The clamping pressure is adjustable from 345 kPa (50 psi) to 1379 kPa (200 psi). During the pressing operation a selectable dwell time can be set by the operator from 0-4 seconds. The factory setting is 3 seconds in accordance with TAPPI T 569. The system is designed with a reinforced anvil to prevent deflection during sample preparation. Reinforced anvil system prevents sample deflection during preparation! Prep Station Specifications Pneumatic clamping force: 50-200 psi Dwell time: 1 to 4 seconds Sample Press Timer: user adjustable 1-4 seconds 5 Aluminum platens: sample size of 25.4 x 25.4 mm (1.0 x 1.0 inches) Sample thickness range: up to 1.25 mm (0.050 inches) Clamping pressure adjustment: 345 kPa (50 psi) to 1379 kPa (200 psi) Clamping pressure resolution: 7 Kpa (1 psi) Clamping pressure control: at 690 kPa (100psi) is better than ± 21 kPa (7 psi)at 1034 kPa (150psi) is better than ± 34 kPa (5 psi)   Software Program Screen displa Provides a web-like page navigation menu driven user interface. Normal Mode Calibration mode INSTRUMENT SPECIFICATIONS Ranges: 0 -1050 J/m² (0 - 500 ft.lb x 10-3 ), 0 - 1575J/m² (0 - 750 ft.lb x 10-3 ) and 0 - 2100 J/m² (0 - 1000 ft.lb x 10-3 ) Pendulum Release: Magnetic Peak/Angular Resolution: 0.04° Standard: ½ ft.lb/in² pendulum standard, ¾ ft.lb/in² and 1 ft.lb/in² available for stronger materials. Options: ¼ ft.lb/in² and other weights also available Results directly in: ft.lb/in², J/m², kg.cm Statistics: Average, Standard Deviation, Minimum, Maximum and Calibrate function

• Length: 750 mm
• Width: 400 mm
• Height: 500 mm

The Internal Bond is used to determine the internal bond strength of variety of paper & paper board material. Application: Paper and Paper bonds are subjected to impulse,impacts and shock loads into or out of plane of the sheet.This can cause structural failures. Test results from this test system may correlate to product failures. The test is conducted on a sandwich formed by double coated tape, paper specimen and again double coated tape. This sandwich is pressed between a flat metal anvi and an aluminum platen. A pendulum impacts on top inside of vertical face of aluminum platen – causing it to displace and thereby split paper specimen. The energy absorbed in rupturing of the sample in computed by measuring the peak of the pendulum swing. Suitable for testing as per following Standard: TAPPI: T 569 on 07   Features:   Parallel Centronix Port to connect it to your 80 column dot matrix printer to print stored test results. Models:   UIBST - Ubique Internal Bond Scott Type Tester with microprocessor based digital model.

• Power: 230 Volts, 50 Hz, single phase.
• Load capacity: Up to 5 kg.*
• No. of load cell: One.
• Cross Travel: Up to 250 mm*
• Speed: 300 mm/minute.
• Direct display: Peak load.
• Paint: Powder coated.