Bright Cold Rolled Steel Strip Dealers in Andheri East, Mumbai

• Width: Max 150mm At Present.
• Width: Max 150mm at present.
• Coating Type: Nickle, Chrome, Tin, Brass,Zinc,Copper
• One Sided: One Side Tin & other side Nickle or any other coating also possible
• Two Layer: Tin Coating on it Brass / Nickle Coating possible.
• Coating Thickness: 0.2Microns to 15 Microns
• Surface Protection: Paper / Plastic / Panni
• Packing: Box / Pallates
• Thickenss: 0.02mm to 1.5mm

We are the only one in coated steel strips in India. We do Nickle, chrome, Brass, Copper, Tin & Zinc Coating on Cold Rolled Steel Strips made as per customer specification.

This type of Cotton fiber is derived from carding machines. Carding is a mechanical process that disentangles, cleans and intermixes fibers to produce a continuous web or sliver, suitable for subsequent processing.This is achieved by passing the fibers between differentially moving surfaces covered with card clothing. It breaks up and unorganised clumps of fibre and then aligns the individual fibres In the process free flowing fibers are removed by rotating flats.These fibers are Longer than comber fibers and also much better quality than Dropping Fibers, It also has some trash content and has very few impurities which are present in the cotton

• Grade: D / DD / EDD *
• Size: 5 to 20mm x 0.15 to 0.80mm
• Tolerance: On width
• + Nil - 0.25m: On thickness
• +0.01 - 0.04mm: Mechanical Properties
• Temper: Annealed & skin passed
• Hardness: 105 VPN Max
• U T S: 350 N / Sqmm / Max
• Y S:  
• Elongation: 30 % Min on 50 mm G.L.
• Erichsen cupping value:  
• Bend test:  
• Surface: As Rolled Normal bright

• Application: Oil & Gas Industry
• Thickness: range from 0.4mm up to 1.2mm
• Grade: ASTM A240
• Material Grade: SS 304, SS 304L, SS316 & SS 316L
• Usage/Application: Oil & Gas Industry
• Thicknesses: 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.2mm
• Minimum Order Quantity: 1000 Kilogram

Aftrer under going cold rolling coils are become very hard because of work hardening and loss of ductility, In order to restore ductility formability coils are annealed in to protactive nitrogen-hydrogen atmosphere so that desired grain size and orientation is obtained, With use of Bell Furnace we annealed coils as per hardness required, following are mechanical Properties for Annealed and Skinpass sheets and strips

Galvanized Steel Strips, open steel plates, Low Alloy Steel Plates

Hot Dip Galvanized Steel Strips, Metal Sheets, Galvanized Steel Strips