Bundling Machine Dealers in Mumbai

Production of fabrics successively with the same design is easier utilizing a warp-tying machine to exchange the beams. Jaytex warp tying machine is the most effective and low budget and maintenance free machine which fulfills this requirement to a large degree. Tying installations, which requires a minimum of time for changing the warp contributes a lot to the efficiencies and low stoppage rates of the high performance looms. Jaytex is the pioneer in developing warp tying equipment with 100% Indigenous components. End to end warp tying at a high speed, directly on loom along with healds, reeds etc. It is a highly compact & sophisticated machine, which deals with delicate yarn at a very high speed. The working range of this machine is practically unlimited it can tie any material with or without lease may it be cotton, spun, worsted, filament, P.V., woolen, denim slub, furnishing auto or industrial fabric from finest to coarsest with high efficiency at low labour cost. Easy adaptability to different tying methods at any time. Maintenance free timing belt drive in all the machines. It is a guarantee for service, spares & economy. JAYTEX fully automatic warp tying machine. Fitted with maintenance free timing pully belt drive, having 24 – volts permanent magnet D.C. electric motor 3000 R.P.M., with cooling fan. For speed control P.C.B. with control pot and on-off switch is provided. Completely adjustable light fitting for bright illumination on the knotting spot. The machine is totally enclosed with necessary cover from all the sides, to prevent fiber, dust, lint, yarn residuals etc. entering the working parts. Digital counting & auto stop motion in case of double end selection or breakage optional available in all model machines. Models for Warp Tying (Beam Knotting) Machine JS ModelTying from both sheet to sheet for sized warps, selection by selector needles, count range 6’ s to 80’s single. JL ModelFor leased warps. Tying from both lease to lease, for the warps wound on sectional warping or leased by machine after sizing with double lease. Count/ Din. Range 110’s cotton / 50 Din. Filament up to 6’s cotton 2000 Din. Any type of mixed blends, worsted, spun, P.V. etc. JSL ModelUniversal type provided with lease to lease & sheet to sheet tying module. Yarn range as above. P.U.A.C. ModelIdeally developed for suiting, shirting, furnishing SLUB & FANCY yarn. With technical provisions adapted any counts and type of yarn with un-even condition provided in a single width, can be knotted with or without lease (two selection system). As per the thickness or count of warp the automatic self-adjusting thread clip assures appropriate tension to the threads of both layers no matter how coarse or fine they are. With variable speed control inching motion brighter tube illumination for clear knotting vision the PUAC is developed for today’s high-speed textile industry. Pattern Control ModelA uniquely developed machine with multiple selection system (i.e. L to L, S to S, L to S, S to L) can be used as per your knotting needs. The automatic self adjusting thread clip takes care of any type of pattern with a multiple selection system, & double end knock-off arrangement. It also takes care of different series of yarn with un-even counts and denier wound in one single width. Jaytex machines are electronically regulated it can infinitely adjust from 60 to 600 knots per minute according to count and condition of the warp. An emergency stop motion in case of a fault in selection. Clear display of pattern counts and so on in progressive counting. The machine can handle virtually any yarn delicately without any worry or damage, be it multi filament, pure silk, double or single thread with multi colored pattern, and variations in yarn count with or without lease. Ranging from the finest to coarsest. Ideally suitable for suiting, shirting and furnishing SLUB & FANCY yarn. Heavy Duty ModelFor very heavy counts and Din. sheet to sheet or lease to lease ranging from single 6’s up to 4 X 6’s and 3000 Din. higher range then single 6’s or 800 Din. “PUAC” model machine is recommended. Yarn Dressing FrameJaytex frames are manufactured as per your requirement in height & width ranging between 120 cms. (50”) up to 400 cms. (160” ) With in this range every requested width can be accommodated in stages of 25 cms. (10”). For twin beams your choice are either one frame covering both the warp beam width, or one single frame with double side clamping system or two single frame with coupling device. Double width, separable warp tying frame permit rationalized working on looms with twin warps. The separated tying frame can also be used for looms of normal single beams. Jaytex dressing frames are made out of specially extruded alloy sections which are very sturdy and light weight and at the same time durable for years of service. The yarn clamp holding and tensioning device are simplified for faster dressing; it is designed for easy adjustments vertically and horizontally, to adjust the height according to your loom. They come in very wide range of working width, according to your looms and choice. For faster dressing and easy clamping of coarser warps below 12’s we recommend you our HD/UB type frames, provided with very sturdy U type rubberized, alloy clamps, with oval shaped EN-9 steel bars. Clamping system of Jaytex dressing frame is designed to press the entire warp sheet in parallel and firm condition. Rubbers on both the sides of tension rails guarantees firm grip to the most slippery and fine warp. Jaytex also has Heavy Duty Bar Tensioning Yarn Dressing Frame specially developed for denim & coarser warps. These frames are very sturdy. Special type frames for any imported machines can also be made on order.

• Production Capacity: 300-400 Per Hour
• Brand Name: Vallava
• Power Consumption: 5 HP
• Max Case Size: 400 X 490 Inch
• Glue: Hot,Cold
• Electric Load: Motor 1.865 Kw / Heater 1.5 Kw / 3 phase
• Electric Supply: 440 V AC
• Machine Size: 2113 X 1170 X 1990 mm
• No Of Box: 1
• Machine Weight: 800 Kg

• Voltage: 110V
• Condition: New
• Power: 1-3kw
• Warranty: 1year
• Driven: Electric
• Automation Grade: Automatic

Steel industry demands a lot of scrap processing. Scrap bundling machines aid inoptimizing the efficiency of charging scrap in the furnace. In addition, it helps in utilizing maximum area of the induction furnace, thus minimizing losses. Depending on the furnace charging capacity, & the desired efficiency of the bundling press, & the quality of scrap, following types of Scrap Bundling machines can be offered. Scrap Bundling Machine that can bale 5 tons upto 25 tons of scrap in a shift are available. We can offer following types of Scrap Bundling Machines:- A Triple Action baler presses the scrap from three sides i.e. from the Top, Length wise & Sideways. Such balers are best suited to meet the high production requirements and produce significant cost savings during the scrap transportation. These also enable the maximum feeding of scrap in the furnace during the heat.

Pneumatically operated seal bar impulse ribbon seal and SDK11 cut system,Programmable logic controller-Mitsubishi, contactor telemecanique,Easily loaded film roll cradle for rapid roll changes,Emergency stop button at front sode of machine,Invertor fitted on conveyor for variable speed.

Steel industry demands a lot of scrap processing. Scrap bundling machines aid inoptimizing the efficiency of charging scrap in the furnace. In addition, it helps in utilizing maximum area of the induction furnace, thus minimizing losses. Depending on the furnace charging capacity, & the desired efficiency of the bundling press, & the quality of scrap, following types of Scrap Bundling machines can be offered. Scrap Bundling Machine that can bale 5 tons upto 25 tons of scrap in a shift are available. We can offer following types of Scrap Bundling Machines:- Triple Action Baler A Triple Action baler presses the scrap from three sides i.e. from the Top, Length wise & Sideways. Such balers are best suited to meet the high production requirements and produce significant cost savings during the scrap transportation. These also enable the maximum feeding of scrap in the furnace during the heat. Continuous hydraulic scrap baling press produces high-density bales. The higher pressing force and greater output makes these metal balers one of the fastest and the strongest bundle presses / baling presses.

We offer currency banding & bundling machine. Specification : (nbm-500) bank note size : 60-100 mm in height at random length. banding speed : about 1.8 secbundle. dimensions : 209(w) x 284 (d) x 215 (h) mm. power supply : 240 v ac 50 hz. power consumption : 25 watts max. net weight : 6.5 kg (approx). tape roll : 150 meters (l) x 2030 mm (w)

• Type: Bundling Machine
• Condition: New
• Total Power: 3 kW
• Phase: 3 Phase

• Automation Grade: Semi-Automatic
• Voltage: 220 V
• Capacity: 15 m/min
• Usage/Application: Bank, Stationary Stores
• Bending Material: PP
• Detection Technology: IR
• Hopper Capacity: 200 Bills
• Dimensions: 320x320x440mm(LxWxH)
• Product Code: TP-10HD
• CE Certified: Yes
• Frequency: 50Hz

wire tying machine, Loop Handles Non Woven Bags, industrial sealer

Automatic Rebar Tying Machine, Led Lights, led furniture

bundling machine, Baling Machine, baling presses, hay balers

Note Bundling Machines, note banding machines

Note Bundling Machines, Token Vending Machines, note banding machines