Cable Locator Dealers in Mumbai

We are offering cable fault locator we have great pleasure to inform to you, we provide complete set of equipments in the field of cable laying projects. Along with the same, as we discussed, we also deal in fault detection for u/g & o/h lines with pre warning facilities on the live line before the actual fault occurs & various testing equipments for electrical parameters on hv transformers, cables, ct, pt, gis, etc. Van mounted with all in one set of equipments.

• Color: Grey
• Condition: New
• Power Source: Battery
• Automation Grade: Automatic
• Feature: Easy To Use
• Operating Temperature: High Temperature
• Type: Underground Cable Fault Locator
• Warranty: 5years
• Country of Origin: India

We are pioneers in the manufacturing since 2011 and only one to offer unprecedented warranty of 5 years on our products    A) Underground Live Cable Locator, Pacetrace P700  a) It is the most simplest ever, b) It is the ONLY ONE to have a penetration of 5 metres of underground depth c) Without any fancy and hence complicated features like transmitter and receiver for which we have to find the starting  point of the cable(which is not possible to find generally) to transmit and receive the signal. d) The decibel of the buzz depends upon the magnitude of current. More the current, shriller is the buzz. e) Unlike the above you can start detecting the cable from any point in the middle of the road. You need not search for the  starting point. Just walk with the Locator ON moving right and left; if you hear the beep, the cable lies just under the sensor.  Is it not simple? It is as easy as walk in the park. Easy to operate and easier to maintain. It has zero maintenance! It can map underground cable network in factory premises without any excavation; which will be useful for laying new  cable underground safely in future.  

Underground power cable fault locator suitable to locate U/G power cable faults form 440 volts to 400KV. Cable fault locator (Surge generator) has been primarily designed to produce high voltage surges for pre-location of under ground power cable fault in combination with Reflectometer T-510. 

Consists of a transmitter and a receiver Used to detect or trace conductors and to find short faults in them. The signal generated by the transmitter is made to a modulated current, generating an electromagnetic field around a conductor. This electro magnetic field induces a voltage within the receiving coil. The induced voltage is amplified, decoded and converted to the original signal by the received and finally displayed on screen. It is used for finding  conductors  in  walls, conductor interruptions, short-circuits in conductors Conductor tracing in the soil Detecting fuses and assigning current circuits Tracing sockets and distribution sockets having accidentally been covered by plastering Detecting interruptions and short-circuits in floor heating Tracing metallic water and heating piping All application areas (both,voltage-free and live) are performed without usin any additional instruments Transmitter display indicates the transmission level,the transmission code, as well as the foreign voltage Receiver display indicates the reception level,the transmission code,as well as the mains voltage detection Automatic and manual sensitivity adjustment Acoustic reception signal may be switched off Auto-Power-Off function Backlight Additional lighting function when working under bad lighting conditions Additional transmitters are available to extend or distinguish several signals

• Feature: Small size, light weight and ABS plastic housing which is ergronomically designed for easy use by user,Menu driven simple operation,Measurement maximum 8 km in selectable ranges, Tests any type of copper telecom and signal cables,Range, VOP and Gain are s
• • Display Readout: Color LCD -480*280·
• • Continued operating time: 8 hours
• • Charging time: 3 hours
• • Power Supply: 7.4V Rechargeable Li-ion battery. Charging voltage 230V +/-10%, 50Hz, single phase.
• • Storage Temperature: -15°C
• • Working Temperature: -15°C
• • Dimension: 212 (L) × 170 (W) × 90 (H) mm (approx.)
• • Weight: 1.20 Kg Net (approx.)

In an ever more regulated industry, the next generation of Radiodetection Cable Avoidance Tools, C.A.T4™ and Genny4™, build on over 30 years of Cable Avoidance expertise to enable operators to find more buried utilities, faster. These two innovative tools have been engineered to deliver a step change in capabilities with minimal change in work practices and training requirements. The C.A.T4 and Genny4 range is designed to assist in avoiding buried cables and pipes during excavation, reducing the risk of injury to personnel and damage to utilities. The C.A.T4 is designed to detect signals – whether generated by the Genny4, inherently radiating from metallic services, or from the complimentary range of Sondes (Mice) and accessories designed to enable the location of non-conductive services. C.A.T4 and Genny4 is Radiodetection’s most advanced Cable Avoidance system to date, designed to deliver optimal performance, higher levels of safety, advanced features and at competitive cost of ownership

• Used to: find the point where metal is touching the ground (shield is rusted/rubber buffer is broken) and power is leaking, creating noise on a cable.
• Current Frequency: 8 kHz
• Display: 1.28 in, 128 x 128 BW outdoor LCD display with auto backlight
• Features: Adjustable volume control, Works in conjunction with the UAT-600-T Transmitter.

One Piece Cable Fault Locator from VON CORPORATION, USA using Arc Reflection Method - 240V AC Model,25kV Fault LocatorSectionalizer. Simple operation, On, Radar, Start and unit gives distance to the fault. 1563 joules at both 12.5kV and 25kV. Radar Auto-ranges and Auto-Locates the fault. 1563 joule "dual thump capacitor" provides full energy at 12.5kV and 25kV. 15 Second thump interval.

• Voltage: 230 V
• Brand Name: Sonel
• Model Name/Number: p12i
• Operation Temperature: 0 D C - 50 D C
• Dimensions: 800 x 581 x 482 mm
• Frequency: 50/60 Hz
• Dimension: 800 x 581 x 482 mm
• Weight: Approx 85 kg
• IP Rating: IP54
• Power Consumption: 500 VA
• Pulse Width: 50 ns - 10 S

• Frequency: 50/60 Hz
• Power Source: Batteries
• Operating Temperature: 50 Deg C
• IP Rating: IP65
• Length: 9 Inch
• Current: 500 mA
• Voltage: 250 Volts AC
• Automotive Charger: 24V DC
• Weight: 1.8 kg

• Display Type: LCD
• External Voltage Detection Range: 12 to 400 V
• Frequency Range: 0 to 60 Hz
• Output Signal Frequency : 125 kHz
• Current Consumption: Max. 18 mA
• Power Supply: 9 V battery, NEDA 1604, IE6F22
• Model Name/Number: CFL-01
• Brand: Metravi

Cable Fault Locator, power meters, Battery Tester, Circuit Breaker Analyser

• Type: MT3010A
• Frequency: 2.4GHz-2.5GHz ISM mircowave
• Communication mode: dynamically encrypt mode
• Asynchronism communication speed: 1Mbps
• Signal modulation mode: GFSK
• Working mode: Undirectional transmission
• Microwave message wrong-checked: CRC8 cycled redundance checkout
• Identified mode: External antenna directional or omni-directional, Directional Angle: Horizontal 60 degree,vertical 60 degree, Omni-directional Angle: 360degree
• Identified distance: Maximum 30m (distance is adjustable)
• Anti-collision: Can read at the same time>100pcs tags
• Wrong probability: one of ten million
• Sound indicating: Inner buzzer
• Developing porthttp://members.exportersindia.com/manage-products.php: offer all types of port function
• Data interface: Operating the locator by RS23
• Power supply: DC+7
• Work Temp.: -20℃
• size: 100*65*26mm

Pipe & Cable Locator, Digital Video Recorder, x ray scanner, Metal Detectors

cable fault locators

cable locator, circuit breaker analyzer, Resistance Decade Box

Ground Fault Monitoring System, Power Quality Audit Service, three phase ups