Cable Tray Dealers in Goregaon West, Mumbai

We offer high strength ladder type cable trays that are perfect for heavy-duty power distribution in industries. Our ladder cable trays are available in the following specifications: Specifications: W : 100 to 1200 mm T : 10 to 16 SWG RW : 30 to 50 mm H : 50 to 150 mm B : 10 to 25 mm RH : 10 to 20 mm * Material: Painted, Galvanized Sheet, Hot Dip Galvanized & Powder Coated.

We Are, a Dependable Cable Tray Manufacturer and Exporter, Presents Cable Trays of Three Kinds Viz. Inside Return Flange, Outside Return Flange and Plane Flange. the Width and Length of Our Ladder Cable Tray Varies from 50 to 900mm and 2.44, 2.90 & 3.00 Meter Respectively. We also Offer Perforated Cable Tray Which Gives Flawless Performance During Its Lifespan. the Raw Materials Used By Use are Steel Sheet (mill Galvanized Material) and Zinc Plated Pre - Galvanized to B.s. 2989. We Do Fabrication (hdgaf) in Standards Only. accessories 100 Mm 90 Deg. Horizontal Bend100 Mm 90 Deg. Horizontal Tee100 Mm 90 Deg. Horizontal Cross100 Mm 90 Deg. Inside Riser100 Mm 90 Deg. Outside Riser cable Trunking – Race Way other Range in Cable Trunking - Quick Fix, Self Locking, Screw Fix, Multi Compartment, Accesories Offset & Misc. Fittings. cable Trunking are Manufactured to Bs4678 Part 1 Class 3 from Pre Galvanized Steel to Bs2989 Standard Length is 2.44 & 3.00 Meter However 2.00 Meter Length is also Provided On Customers Requirement in Different Colour Specifications of Powder Coat. Trunking is Supplied with Self Locking Cover & Accessories. width : from 50 to 300mm. length : 2.44, 2.90 & 3.00 Meter. side Heights : 50, 75, 100, 150, 200, 225 & 300 Mm. flange Width : 12 Mm. finisher : Pre Galvanized to Bs 2989, Hot Dip Galvanized After Fabrication to Bs 729 Epoxy Coating / Powder Coating. there are Two Type of Cable Trunkings / Raceways standard Trunking / Raceways standard Trunking is Made with Single Compartment. multi Compartment Trunking / Raceways. multi Compartment Trunking is Made with 2 & 3 Compartment Based On Standard Size. the Compartment of G.k. Nasa Multi Compartment is Made of Equal Standard Size Unless Otherwise Demanded By the Customers, Partitions are Spot Welded / Revated Into Position to Produce Necessary Compartments. cable Trunking quick Fix Cable Trunking a Quick Fix Trunking are Supplied Along with Quick Release Cable Trunking Which Only Require a Quarter Turn to Provide An Efficient Fastening and Quick Release. trunking Size Width X Depth in Mm : thickness 1.0 Mm : 50 X 50 thickness 1.2 Mm : 75 X 50, 75 X 75, 100 X 50, 100 X 75, 100 X 100 thickness 1.5 Mm : 150 X 50, 150 X 75, 150 X 100, 150 X 150,200 X 100, 225 X 50, 225 X 75, 225 X 100, 225 X 150, 225 X 225, 300 X 50, 300 X 75, 300 X 100,300 X 150, 300 X 300 cable Ladders : other Range in Cable Ladders - Light Duty, Medium Duty, Heavy Duty, Type of Flanges Inside Flange Fittings, Outside Flange Fittings. g.k. Nasa Cable Ladders have Heavy Duty Construction and all the Components are Welded for Rigidity and Strength. the Cable Ladders are Available in Three Verities. Light Duty Cable Ladder, Medium Duty Cable Ladder, Heavy Duty Cable Ladder & also Available in Extra Heavy Duty Cable Ladder. general Information raw Material : Steel Sheet (mill Galvanized Material), Zinc Plated Pre - Galvanized to B.s. 2989. hot Dip Galvanizes After : Mild Steel to Astm a 123, Bs 729 & Din50796. fabrication (hdgaf) : Standards. stainless Steel : Aisi 304, 316 (mattine Grade). aluminum : Aluminium Alloy 6063. deep Galvanized : Deep Hot Dip Galvanized (hdgaf, Tgwice Usual Zinc Thickness). epoxy Polyester Coating : Epoxy Polyester Coating On Mild Steel in R.a.l. Colour (this Paint Finish Provide Non Flammable Coating and Hard Adherent). standard Length of Ladder : 2440, 2900 & 3000 Mm. types of Cable Ladders nllr Type - Light Duty Cable Ladders with Square Rivited Rungs.nmlu Type - Medium Duty Cable Ladders with U-type Rungs.nhls Type - Heavy Duty Cable Ladders with Square Tubular Rungs. side Height light Duty : 50 Mm.medium Duty : 100, 125, 150 & 175 Mm.heavy Duty : 100, 125. 150 & 175 Mm. cable Ladders Heavy Duty width : from 50 to 1000mm length : 2.44 & 3.00 Meter flange Width : 15, 20, 32, & 38mm side Heights : 50, 75, 100, 125, 150 & 175 Mm rung Spacing : 250 Mm finisher : Pre Galvanized to Bs 2989, Hot Dip Galvanized After Fabrication to Bs 729 Epoxy Coating / Polyester Powder Coating. cable Ladders Inside Flange Fittings 90 Deg. Horizontal Bendhorizontal Teehorizontal Cross90 Deg. Inside Riser90 Deg. Outside Riser

Cable Trays are used to support power cables & control cables for indoor & outdoor application.GIMS cable Trays erode, corrode and spread heat, thus lead to power interruptions. Our FRP cable Trays are safe, durable and cost effective for routing & supporting cables. Manufactured as per NEMA BISConsultants specification

Cable trays are designed to meet most requirements of cable and electrical wire installation and comply with local and international standards of fabrication and finishing. This system offers significant advantage over conduit pipes and other wiring systems because of lower engineering and maintenance cost, less need to reconfigure system as needs change, less down time for electrical and data handling systems, fewer environmental problems resulting from loss of power to essential equipment. There are Perforated Cable Tray that is a prefabricated structure consisting of a ventilated bottom within integral or separate longitudinal side rails with no openings exceeding 4 inches in a longitudinal directions. There are Ladder Type Cable Tray that is a prefabricated structure consisting of two longitudinal side rails connected by individual transverse members. There are Raceways that is a prefabricated metal structure consisting of a bottom with no openings within integral or separate longitudinal side rails.  

Cable trays are used to support and dress the overhead cable installation.There are two types of Cable Trays namely;    Perforated Type Cable Trays   Ladder Type Cable Trays   Wire Type Cable Trays Perforated Type Cable Trays are manufactured from steel sheets and have perforation on its surface for ventilation. They have bends on both the sides of 25-40 mm. The trays are normally manufactured from 16 G to 12 G sheets, and are of 2500mm in length. Two holes are provided at all the four corners for coupling it with the next tray. Ladder Type Cable Tray are also manufactured from steel sheet, but have ladder type construction. They have two side channels with rungs at 250 mm c/c.         

wire trays, wire dispenser, pipe dispensers

Ladder Cable Trays, cable tray accessories, Stair Treads, Railings

jewellery moulding rubber

PVC Conduit Pipes, pp box profiles, pvc duct pipe, hydroponic systems

Cable Trays and Accessories, cctv, Access Control System

Communication Tower, Transmission Tower, floor steel grating

aluminum perforated sheet, mild steel perforated sheets

Angle Type Cable Tray, Floor Grating Dealers, duct cable, cast iron railing

ELCTRICAL CABLE TRAY, Copper Wires

serrated gratings, pt aluminium conductors, Porcelain insulators

agriculture pumps spare, Automobile Engine Parts, Scaffolding