Cable Accessories Dealers in Mazgaon, Mumbai

Copper laminated flexible jumpers are manufactured by stacking several foils of electrolytic copper and then applying high current under high pressure. This is a special metal diffusion whereby the metal itself melts and forms homogenous bonds thus giving a very negligible, almost nil, millivolt drop across the connector, thereby reducing the temperature rise and increasing the current carrying capacity of the jumper. In this process, no filler metal is used to join two layers together. They have a constant cross section over whole length. The current carrying capacity of solid busbar and copper laminated jumper manufactured by this process is the same. Therefore these jumpers are a substitute for solid busbar. It is also possible to drill, saw, braze, mill & weld the contact areas without any problem. These types of flexible connectors are used as flexible expansion joints in order to connect busbars in Switchgear industries, Power plants, Caustic Soda.

Based in Mumbai, Maharashtra, we are the leading manufacturers, suppliers and exporters of Cable Terminal Ends consisting of tubular terminal ends called lugs, both for crimping and soldering. They are manufactured from soft drawn, pure, high conductivity copper tubes conforming to BS 1997. They ensure electrical and mechanical strength, and are also produced from aluminum tubes as per IS 5082 (mainly used with power distribution). We ensure deliveries within the required time frame to customers.   Cable Terminal Ends : Crimping Type Copper Tubular Cable Terminal Ends Crimping Type Copper Tubular Cable Terminal Ends - Bell Mouth Four Hole Cable Terminal Ends Tinned Copper Tubular Cable Lugs (Without Inspection Hole) Long Barrel Tinned Copper Cable Terminal Ends Copper Cable Terminal Ends With Extended Palm (2 Hole) High Voltage Copper Terminals - 33 KV Tubular Compression Cable Lugs (As Per DIN 46235) Cable Terminal Ends As Per Australian Standard Narrow Palm - Circuit Breaker Cable Terminal Ends Long Palm Long Barrel Cable Terminals Mechanical Cable Lugs - Bolted With 2 Screws and 4 Screws Aluminium - Copper Bi-Metal Terminals (With Copper Palms) Aluminium Terminals Aluminium Forged Cable Lugs (As Per DIN 46329) Aluminium 3 - Core Sector Cable Lugs Aluminium 4 - Core Sector Cable Lugs Ring Type Tinned Copper Cable Terminal Ends - Insulated & Non Insulated Ring Type Tinned Copper Cable Terminal Ends (Non Insulated) Fork Type Tinned Copper Cable Terminal Ends (Non Insulated & Insulated) Copper Pin Type Cable Terminal Ends Copper Flat Type Cable Terminal Ends Copper Insulated Pin Type Cable Terminal Ends Copper Insulated Flat Type Cable Terminal Ends Snap On Terminals Copper Reducer Pin Type Terminal Ends Copper One Hole Offset Tongue Terminal Ends / Connectors Copper Compression Lugs - Short Barrel Copper Compression Lugs - Long Barrel Copper Compression Lugs - Long Barrel, 2 Holes Copper Standard Wall Starter Terminal Ends Ring Type Tinned Copper Cable Terminal Ends (Non Insulated) Special Cable Terminal Ends

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. They are used in the plumbing apparatus of domestic, commercial and industrial water supply lines, machinery and processing equipment etc. They are also fitted on water pump lines with the sole purpose of removing air blocks. Pipe caps are highly demanded as an important category of pipe fittings.Fabricators of all types and grades of pipe have used our caps to protect ends and keep out dirt and other foreign material. Pipes capped with Wedge end caps arrive at the project site in perfect shape and ready for installation. Material: A234-WPB A234-WP12 A234-WP11 A234-WP5 A403-WP304 A403-WP304L A403-WP316. A403-WP316L A420-WPL6,316L, 304L, 321, 321H.Size: 1/2" - 24"Manufacturing standard: ASME/ANSI B16.9, JIS, DIN, EN, API 5L, etc.Surface treatment:Shot blasted, rust-proof black oilUsage: Petroleum, Chemical, Power, Gas, Metallurgy, Ship-building, Construction, ect.Packing: Plywood Case/ Pallet/ other

• Type: End Caps
• Material: Aluminium, HDPE
• Shape: Round
• Certification: ISI Certified
• Color: Grey
• Condition: New
• Finishing: Non Poilshed
• Feature: Good Quality

It is used to tie wires and is made from High Quality

Cable Jointing Kits, mechanical connectors

Cables

Leather Product, Agricultural Product, Engineering Product

Cast Iron Cable Route Marker

Ball Valve, Brass Needle Valve, Carbon Steel Needle Valve, valve seat

Stainless Steel Sheet 316L, 180 Degree Elbows

cables accessories, wire accessories, railing tubes, decorative tubes

Carbon Steel Cap, SS Dome Nut, Copper Tubes In Coil Form, brass hex rod

Cable Jointing Kits, aerosols maintenance chemicals