Cable Accessories Dealers in Mumbai

• Size: 1inch, 2inch, 3inch, 4inch, 5inch
• Type: Lug Clamp
• Material: Stainless Steel
• Shape: D Type
• Thickness: 0.5mm, 1mm, 2mm, 3mm
• Color: Multi Colour
• Technics: Forging
• Application: Connect Pipe Flange, Pipe Fittings, Pipe Stopper
• Structure: Suspension Clamp
• Feature: Proper Finish., Sturdiness, Optimum Durability
• Surface: Coated, Electroplating, Galvanized, Polished

Leveraging on our rich industry experience and strong tie-ups, we are capable in bringing forth top-notch quality Cable Jointing Kit to all our worthy buyers. Our End Termination Cable Jointing Kit are precision engineered and intricately designed at our vendors’ end. Its attributes of easy installation, smooth functioning and longer service life make it extensively in demand. We not only say but in literal sense execute timely deliveries without any delays. One can purchase the kit from us at reasonable prices.

• Brand Name: Nandodyne
• Material: Stainless Steel
• Size: Standard
• Country of Origin: India
• Shape: Round
• Surface: Polished
• Note: Shipping Charges Will Be Pay By Buyers

• Type: Heat Shrink End Cap
• Material: HDPE
• Shape: Round
• Thickness: 10-20mm
• Certification: ISI Certified
• Application: Cable End Sealing
• Color: Black
• Finishing: Polished

We are recognized in the market as one of eminent Heat Shrink Cable End Caps Manufacturers in the national and international markets. Our Heat Shrink Cable End Caps are developed using cross linked polyolefin material.Heat Shrink Cable End Cap is used to seal the ends of all types of Cables & protect from ingress of water/moisture. The caps are manufactured from high quality cross linked polyolefin material.Compatible with most commonly used Cable Jackets i.e. XLPE, PVC, PILC or Rubber Sheathed Cable. Hot Melt adhesive lining provides permanent seal on irregular cable sheaths. Excellent resistance to weathering, moisture, contamination and adverse environmental conditions, according to IP 68 (Ingress Protection). Tamper Proof Application : Custom Logo / Print with special non- removable Ink marks permanent seal on End Cap after Shrinking, thereby avoiding claims in case of Pilferage of Cable length. Valved End caps (V) available for pressurized application for Telecom cables. Special Relief valved End Caps (RV) available for degassing application in High Voltage Power cables. Live End Cap Kit available for sealing Live Cables. Conductive End Caps are available with Conductive Mastic.   Types available : Special relief valve end caps apt for high voltage power cable Conductive End Caps with conductive mastic High voltage, non-tracking, End Caps for sealing live cables Detail : Protect from ingress of moisture Compatible with all kinds of cable jackets Have hot adhesive lining that provide environmental seal Resistant to weather, chemicals, solvents, etc. Usage : Widely used to seal the ends of all types of cables like telecom cables

• Application: Home
• Color: Black
• Feature: Crack Free, Durable, High Ductility
• Outer Material: Rubber
• Internal Material: Copper

The LT/LV AB cables (aerial bunched) cable is a very novel concept in overhead power distribution, as compared with conventional bare conductor in overhead distribution system, AB cables provides higher safety, reliability, lower power losses and ultimate economy by reducing installation, maintenance and operative cost. This superior system is ideal for rural distribution and especially attractive for installation in difficult terrains such as highly areas, forest areas, coastal areas etc. These cables are designed, manufactured & tested conforming to IS: 14255 & other international specifications. AB cables is also considered as choice for power distribution in congested urban areas in developing urban complex AB cables is a better choice because of its flexibility for re-routing as demanded by changes in urban development plan.\n\n\nLess fault rate on account of good protection against line and ground faults by high winding falling trees or birds especially in hilly areas and forests.\n\n\nHigh insulation resistance to earth in all seasons. Negligible leakage currents and low losses.\n\n\nMultiplexer circuits of power and telephone cables could be in the same set of poles.\n\n\nBetter adaptability to lay besides with existing overhead bare conductor system without any interference.\n\n\nHigh capacitance and low inductance leading to low impedance of lines.\n\n\nLower voltage drop, higher current carrying capacities vis-à-vis better voltage regulations.\n\n\nLonger spans and longer distance lines are possible with better system stability.\n\n\nAB cables are much safer than bare conductors.\n\n\nIt can be laid in dense vegetation and forest areas.\n\n\nAdditional connections can be easily and quickly made with hot line connectors.\n\n\nOverall lines cost is reduced.\n\n\nMaintenance is very convenient.\n\n\nVery difficult to tap the AB cables, thus reducing theft which leads to lower distribution losses.\n\n

• Application: Industrial
• Voltage: 220V
• Driven Type: Electric
• Feature: Durable
• Voltage: 11 kV
• Voltage Type: Medium Voltage
• Core Type: 3 Core

• Country of Origin: India
• Type: Cord Clips
• Material: Brass
• Color: Black
• Condition: Good

We are the Manufacturer of Cord Clips.

• Material: Steel / Stainless Steel
• Packaging Size: As per customer require
• Connectors type: Four-way connectors
• Surface Treatment: Hot Dip Galvanized
• Screws required: 4
• Round Bars size: 8 mm or 10 mm
• Galvanized Plate width: 30 mm
• Cross Clamp connect Plate with width: 40 mm
• Cross Clamp size: 60 x 60 x 3 / 60 x 60 x 4 mm

  Manufacturer of Cross Clamps These four-way connectors are suitable for making cross, straight through or tee joints in stranded copper conductor.Type - HOT DIP GALVANISED STEEL HDG Steel Cross Clamp equipped with 4 Galvanised Screws & Nuts M8 x 25, suitable to connect-A) 8 mm or 10 mm Round BarsB) Galvanised Plates with maximum width of 30 mm.- Cross Clamp also available to connect Galv. Plate with 40 mm width.- Cross Clamp also available in size 60 x 60 x 3 / 60 x 60 x 4.- Cross Clamp also available of Stainless Steel on special request  

• Material: Metal
• Feature: Good Quality, Moveable, Stylish
• Voltage: 220V
• Finishing: Polished
• Power: 200W
• Driven Type: Electric
• Warranty: 1year

• Material: Nylon
• Finishing: Polished
• Color: Available in Many Colors
• Thickness: 1.5-2mm
• Country of Origin: India
• Size: Standard

• Insertion Loss: <0.20dB
• Full Name: Mechanical Transfer Registered Jack (MT-RJ)
• Multimode Diameter: 3mm
• Return Loss: >50dB (PC)
• Repeatability: <0.1dB
• Interchangeability: <0.2dB
• Durability: Plug & Unplug 1000 times
• Operating Temperature: –40 Degree C to +85 Degree C
• Brand Name: Projexon

Features :Our male Fiber Optic Connectors have pre-polished zirconia ceramic ferrule with a slight spherical end-face. They also feature a screw-on collet that ensures precise connections in high vibration environments. High return loss Low Insertion loss Telcordia style boots Compliance with TIA/IEA, IEC, Rohs. Entire products are 100% RoHS Compliant Applications : CATV, Metro, LANs. Active device termination. Telecommunication networks. Industrial, medical & military.

• Voltage: 220V
• Usage: Industrial
• Frequency: 50 hz
• Voltage: 220 V
• Operation Mode: Automatic
• Power Source: Electric
• Operating System: Window

• Material: Metal
• Color: Black & Grey
• Application: Holding Tie and Belt
• Feature: Durable, Fine Finishing, Good Quality, Light Weight
• Country of Origin: India

• Country of Origin: India
• Type: Cable End Caps
• Material: Pvc
• Shape: Round