Control Cable Dealers in Mumbai

Our FRLS - PVC Power / Control Cables are manufactured from the optimum quality raw materials to add maximum durability & unbeatable performance. Flame Retardance, Low Smoke Emission and Acid Gas Emission. Quality tested & approved by the competent authority.

The XLPE Control Cables utilize state-of-the-art manufacturing technology that has been imported from Royle Systems, USA. The XLPE Control Cables manufactured and exported by the company are highly demanded in the industry owing to their high tensile strength. The company manufactures these XLPE Control Cables from quality materials. CharacteristicsTemperature resistantWithstands emergency overloadHigher current carrying capacityHigher short circuit ratingWidely Used InAutomation industryPower industryElectrical industryTelecom industry

• Type: Lt Control Cables
• Feature: Durable, Heat Resistant
• Internal Material: Copper
• Application: Industrial, Home
• Brand Name: Polycab

Wholesaler of Fire Survival Cables & Fire Resistant Cables. Our product range also comprises of Power Cables, Coaxial Cables and Shielded Cables.   PVC Control Cable       Fire survival cables will not burn up to 1000 degrees celcius. for giving sufficient time to evacuate building when it caught fire. will survive up to90minits.  

• Color: Black
• Cable Type: Optical Fiber
• Cable length: 90 m

LT Aerial Bunched cables, also known as LT AB Cables, are distinct from bare conductor overhead distribution. They are good for distribution of electricity to residential, commercial and industrial units. These cables have overcome limitations of PVC insulated cables such as thermal degradation, poor moisture resistance and thermoplastic nature. LT AB cables have higher current rating, higher short circuit rating approximately 1.2 times that of PVC. LT AB Cables have lower cost of laying because of comparatively smaller diameter of cable and higher weight. Installation charges are also low as diameter of the cable is comparatively lesser with smaller bending radius, requiring less space. For longer cable length voltage drop, one size lower cables can be used as compared to PVC insulated cable. LT AB CABLE - FEATURES AB cables are highly reliable and insulation has been developed to withstand extreme cold and intense sunlight. Disturbance and faults occur five to ten times more often in open wires lines than in AB cable lines. There is no risk in touching the live cable and the insulation reduces the number of short circuits and over voltage faults in overhead cables during thunderstorms. Few hardware accessories are needed which are different for different size of cables. Streets can be lit only at little extra conductor for lighting. The cable can be supplied with one or two insulated conductors for street lighting. Convenient Usage In electricity theft prone areas. As replacement of bare lines in rural area & narrow street with limited space. As replacement of bare lines where reliabilities of support is of prime importance. In hilly terrain here cost of erection of overhead lines or under ground cable becomes very high. As reinforcement of existing system with increase in voltage/current carrying capacity. For temporary supplies.Advantages In comparison with bare overhead distribution line AB Cable has very high reliability in maintaining power services because power and neutral conductors are insulated with the best dielectric, resulting in the following advantages: Less fault rate on account of good protection against line and ground faults by high winding falling trees or birds specially in hilly areas and forests. High insulation resistance to earth in all seasons. Neglible lekage currents and low losses. Multiplexer circuits of power and telephone cables could be in the same set of poles. Better adaptability to laid besides with existing overhead bare conductor system without any interference. High capacitance and low inductance leading to low impedance of lines. Lower voltage drop, higher current carrying capacities vis-à-vis better voltage regulations. Longer spans and longer distance lines are possible with better system stability. AB cables are much safer than bare conductors. It can be laid in dense vegetation and forest areas. Additional connections can be easily and quickly made with hot line connectors. Overall lines cost is reduced. Maintenance is very convenient. Very difficult to tap the AB cables, thus reducing theft which leads to lower distribution losess. Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire, the operating temperature of the conductor is 90 c as against 75 c thereby allowing AB cable to carry current equivalent to that of bare conductor of the same size.

• Type: Power Control Cable
• Certification: ISI
• Color: Black
• Voltage: 220V
• Application: Industrial
• Power: 3-6kw
• Feature: Durable, Heat Resistant, High Ductility, High Tensile Strength

Leveraging on our rich industry experience and strong tie-ups, we are capable in offering preeminent quality XLPE LT Power & Control Cables to our buyers spread all over the world. The XLPE LT Power & Control Cables are intended to be used in power plant industries amongst many others. In order to meet urgent and bulk demands of the buyers, we maintain a huge stock in our spacious warehouse. One can order retail and bulk both with us.   Key Applications : LT Power and Control Armoured Cables are available in different combinations such as Aluminium, Copper Conductors, Round Solid Conductors, stranded conductors, sector shaped conductors, taped inner sheath, extruded inner sheath, round steel and aluminium wire/ flat galvanized steel strip armoured/ unarmoured, single/ double outer sheated, etc. are available. LT PVC/ XLPE Power Cables are used underground as well as overhead trnsmission of power in, Power plants, Industries, various other projects. Conductor : High conductivity electrolytic grade annealed COPPER conductor as per IS:8130:1984 Insulation : XLSPE complying with IS:7098 Part 1 Inner Sheath : PVC type ST1 or St2 as per IS:5831:1984 Armour : Galvanised steel Strip as per IS:3975 Over Sheath : PVC type ST1 or ST2 as per IS:5831:1984

Apar Industries Ltd. (Unit: UNIFLEX CABLES), has state-of-the-art manufacturing facility to manufacture High Voltage XLPE cables up to 66 KV on a high precision CCV line from ScholzSupermac (Dry Cure Dry Cool system) and Royale Systems, USA. Cables are manufactured to various National and International standards, while specialize in producing cables for critical applications. The cables are designed after detailed engineering to meet the specific requirement and high service performance. It also has several high quality extruders for production of LT cables.

• Aluminium Conductor: A
• XLPE Insulation: 2X
• Round Steel Wire: W
• Flat Steel Strip Armour: F
• Double Round Steel Wire Armour: WW
• Double Flat Steel Strip Armour: FF
• Non Magnetic (Al) Round Wire Armour: WA
• Non Magnetic (Al) Strip Armour: FA
• PVC Outer Sheath: Y

• voltages: 1500 volts

PVC insulated and sheathed control cables for electric supply and control purposes. These cables are suitable for use in AC single phase or three phase (earthed or unearthed) systems for rated voltages upto and including 1100 volts and in DC systems for rated voltages upto and including 1500 volts to earth.

Cables designed for the local inter connection of ground, sea. and airborne instruments and electronic equipments. it has excellent characteristics to external noise pickups and heavy attenuation to it during transmission of very low level electrical signals. These cables can be manufactured in pair and multi pairs & triad with different size .

We supply all types of Car Control Cables that are manufactured using high level of precision and quality raw materials. These are available for various cars like Toyota, Tata, Hyundai, Maruti, etc.

Zenium 1100 Volts control cables are manufactured using high grade XLPE/PVC insulation, with electrolytic grade solid/stranded/flexible plain annealed and tinned copper conductor laid together, extruded using protected PVC inner sheath, special zinc coated galvanized iron wire/strip armour providing protection against external environmental hazards. This assembly is overall sheathed with high grade PVC with FRLS, ZHFR and LSHF compounds that are designed and tested. Theses cables meet national and international standards like IS:1554 part-1:1988, IS:7098 part-1:1988 and IEC 60502. These cables are suitable to use indoor/outdoor for control and power transmission.

1100 Volts grade — BASEC/KEMA/(CPRI/ERDA Tested) Control Copper Cables, Solid/Stranded conductor, PVC / XLPE Insulated, cores laid up, PVC / FR / ST2 / FRLS / LSZH taped / extruded innersheath, Unarmoured/ Armoured, extruded PVC / FR / ST2 / FRLS / LSZH sheathed cables from 2 to 100 Core in 1.5 and 2.5 sq.mm as per IS 1554/IS 7098 (Part 1) 1988 and generally confirming to IEC 60502-1 / ES 5467 / ES 6724.

KEI INDUSTRIES LIMITED is manufacturing LT POWER CABLES with PVC or XLPE insulation of voltage grade upto 3.3 KV conforming to various Indian and International Standard Specifications. KEI also manufactures other types of cables as listed at the end of this catalogue. These winding wires have very thin insulation thickness which makes them useful in smaller submersible pumps such as V4 pumps. The old pumps are to be rewound the stator slots get smaller and they require thinner winding wires. CROSS LINKED POLYETHYLENE (XLPE) :- XLPE means cross-linked polyethylene or vulcanized polyethylene. The basic material is low density polyethylene. Polyethylene is a thermoplastic material consisting of long chain of hydrocarbon molecules. At elevated temperatures these molecules tend to move relative to one another so that the material becomes increasingly deformable and will eventually melt at the temperature around 110oC.

We are engaged in offering an exclusive gamut of LT Armoured Cables . we manufacture this product range in both PVC and xlpe outer sheathing. The core & pvc inner sheathed of our products are formed with standard aluminum conductor from 10 SGMM & above. Our firm provide cable ranges from 1 core x 1000 SGMM up-to 4 core x 630 SGMM .

KEI INDUSTRIES LIMITED is manufacturing LT Power Cables with PVC or XLPE insulation of voltage grade upto 3.3 KV conforming to various Indian and International Standard Specifications. KEI also manufactures other types of cables as listed at the end of this catalogue. CROSS LINKED POLYETHYLENE (XLPE) XLPE means cross-linked polyethylene or vulcanized polyethylene. The basic material is low density polyethylene. Polyethylene is a thermoplastic material consisting of long chain of hydrocarbon molecules. At elevated temperatures these molecules tend to move relative to one another so that the material becomes increasingly deformable and will eventually melt at the temperature around 110oC. By means of process similar to the vulcanization of rubber the polyethylene molecules can be cross-linked. The process of cross-linking or vulcanization consists of producing chemical bonds at interval between the long molecular chain to give a "ladder" effect which prevents slippage between molecules. As a result of cross-linking the material becomes heat resistant and does not soften at higher temperatures. Further it has better resistance to stress cracking and good resistance to ageing in hot air. With the change of structure there is no adverse effect on electrical properties. Advantages of "KEI" XLPE CABLES Dielectric losses are very small. Higher current carrying capacity. Higher short circuit rating 250oC. as against 160oC for PVC. KEI XLPE can retain flexibility down upto – 40oC. Jointing and Termination is easy. Light in weight. They are not prone to fatigue damages due to vibrations or loading cycles. Has better resistance to most chemicals, oils, acids, etc. Can be installed along cable routes without elevation limitations.

Multicab has established its name in India and abroad for its quality and commitment to customer satisfaction.To meet ever increasing demand of POLYCAB cables, POLYCAB has put up a new state of the art manufacturing unit at Daman (U.T.). The manufacturing of XLPE insulated heavy duty cables is by adaptation of latest technology. The XLPE cables are manufactured as per IS-7098 Part-1 & Part-2 and can also be manufactured to meet the requirements of any of international standards like BS-5467, IEC-60502, DIN etc.The XLPE compound used is obtained from reputed international sources, meeting all required parameters. The cables are manufactured in highly quality conscious environment with testing and inspection from raw-materials to finished cable stage. The assurance to the quality is further ensured by ISI certification on cables and ISO-9002 certification by UL, USA.

Armoured & Unarmoured