Car Electric Parts Dealers in Midc, Mumbai

Highly appreciated for its quality, durability and high utility, the Rotor Shafts have huge demand in both national and international market. The company is a successful Supplier and Exporter of Rotor Shafts from India. These Rotor Shafts are basically used for starter motor /alternator motor assembly, planetary gear housing spare parts. We customize the Rotor Shafts as per our client’s specific requirements. Customers can buy the Shafts at industry leading rates.

• Material: Steel
• Size: 10 inch-20 inch, 1 inch-2 inch, 2 inch-3 inch, 1/4 inch-1 inch
• Tolerance ID: ISO H8, H9, H10
• Hallow Sections: Circular
• Heat Treatment: Stress relived, annealed
• Unit Length: 3m, 6m

Application – Single-acting cylinders. Actuation - Pilot oil. Functions – When pump is started, pilot oil automatically closes valve and directs oil to cylinder; when pump is stopped, valve automatically opens and oil returns to reservoir. Used on these pumps – Furnished with pilot lines and adapters for PA55, PA90, PE30, PE55, PE90, and PE120 series. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached to this valve. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9504, 9584, 9610 and 9610A, order four 12001 cap screws. For valve 9582, order two 12001 and two 10856 cap screws.                                      

These are reconditioned by removal of worn-out / damaged portions are pre-machined to sound metal. NDT checks are performed prior to weld built up. Inlay of satellite on valve seat area and finish machining followed by lapping and blue matching with respective valve spindle is done to ensure minimum 70% contact area.

Connecting Rods are made from steel forgings, but malleable or spheroid-graphite iron casting or sinter forgings are beginning to be used for smaller engines. These normally have either serrated or groove-and-tongue joints. Split half-shell thin-wall bearings are incorporated in the big-end housing bore. 

Harnessing the expertise developed over the years in the industry, we, as a Manufacturer and Supplier, offer Titanium Ball Valves. We manufacture the best quality thanks to our skilled professionals, sophisticated technology and latest machines. These valves are suitable for application in various purposes across different industries. The raw material used in manufacturing process is procured form reliable vendors. The supreme quality makes the valves popular among customers.Description : The Titanium Ball Valves Premium Alternative listed are part of our standard offering because of their excellent design, reputation, performance, compatibility and validation with the process. Working Pressure Range - 6,000 PSI. Process Connection Size - 3/4 to 2 Material - Titanium, Monel, Hastel Alloy   For More Information Please Visit On : WWW.SAITITANIUM.IN

Our range of frp covers are anti Corrosive, Life Long, Water Proof, Light Weight, No Maintenance Charges, Not to be paint (built in paint), Attractive Appearance, Air Ventilation for Motor Cooling, Once piece construction. • You are aware, covers made of Aluminium sheets are costly and are not strong. • Galvanised iron sheet covers get corroded once the Galvanised coating goes off. Thereafter they have to be painted every year. Moreover, louvers are not proper so, while wind blows water or liquid penetrates in. Louvers are not well planned that is why there is no cross ventilation. Thus, it reduce life span of your Motors. • We therefore, suggest to use frp covers. In order to save Raw Materials or to reduce cost, some companies make covers narrower like tight clothes. But, we keep sufficient Gap between the motor's outer surface and FRP Guard. Louvers are properly located and provided on all sides so that there will be good ventilitation for air and heat exit. Our Covers and good l

We are the leading Manufacturers & Exporters Of Antivibration Machine Mount and Industrial Rubber Products.

• Material: Stainless Steel
• Media: Air
• Frequency: 50 Hz
• Voltage: 120 V
• Automation Grade: Automatic
• Ip Rating: IP 65

• Type: Diesel Engine Spare Parts
• Material: Metal
• Application: Engine Use
• Color: Metallic

Blower : We manufacture a wide range of centrifugal fans to suit number of industrial applications. Centrifugal Blowers are well engineered and having high efficiency incorporating all the latest technologies. Being the heart of Blower, Impeller is suitably designed for required combination of air quantity and air pressure for various applications. We manufacture Impellers as per requirements. Impeller are duly machined after careful fabrication and statically & dynamically balanced for minimum sound level and vibration.  Electric Motor : We can supply container load at a very competitive price.  Controller : We incorporate controllers in our furnaces & ovens can supply ON/ OFF, single set point, Single ramp & Soak, 2 Set point, PID, Profile PID controller.   Thyristor : We can supply both SCR and SCR thyristor as well as SCR and Diode Thyristor.  Recorder : We can supply single / 2 pen strip chart recorder, 8 channel temp recorder with PC output as well as PC interface.   Sensor : We manufacture Thermocouple as well as RTD sensors.  Heating Element : We can supply heating elements of coil as well as strip type of both Ni/ Cr as well as of Kanthal A1. For temp up to 300 deg C, we can supply heater of Rod types having U / L shapes.  Insulation : Insulation of Rockwool, Mineral Wool, Ceramic fibre & others can be provided at an excellent rate for Bulk requirement.

• Technical Details: Power consumption: 7.75 kW Production: up to 800 kg/hr Raw material: cotton
• Key Features: Tangential material flow Beater spikes Adjustable deflector blade Etc.

When coarse contaminants need to be removed from raw material, the Pre-Cleaner CL-P is the ideal addition to the blowroom line. Positioned before mixers and fine cleaners, the CL-P Pre-Cleaner ensures that the cotton remains for a longer time in the cleaning roll area and is therefore cleaned intensively, but gently.

Plastic or Fluoropolymer components are moulded and machined to meet customers particular requirements. Although all products are made to customer specific drawings, typical components include ball valve seats, gaskets, washers, filter baskets etc and materials range from simple plastics such as Nylon, Delrin, UHMWPE to specialist fluoropolymers such as PEEK, PCTFE and obviously PTFE. Duflon can cater for one-off quantities upto large scale mass production quantities.

Our 25 years of experience in the manufacturing of engine components, ‘Balu’ has strived to offer end to end solutions to its customers and with the present infrastructure capability & strong financial support, the company has ventured into manufacturing other engine components for specific customer on ‘Made to Order’ (MTO) basis.The company has also assisted companies with Assembling of certain engine parts to offer a more convenient solution to some of our customersWe are also looking forward to add Cylinder Heads, Cylinder Blocks and Camshaft amongst a few to our manufacturing range. 

• Type: Guide Bar
• Material: Brass, Metal, Plastic, Pvc, Rubber, Stainless Steel
• Application: Agricultural, Giving Shape To Saw Chain
• Application: Industrial
• Color: Black, Blue, Green, Red, Silver, Yellow
• Condition: New, Used
• Finishing: Non Polished, Polished
• Dimension: 16 to 22 Inch

Ball Valve Seats APPLICATIONS Automotive Power Generation Petrochemicals Fluid Power Instrumentation Chemicals & Fertilizer Plants Electronics Filtration Pharmaceuticals Hydraulic Fittings Hydraulic Cylinders Pneumatic Cylinders Valves and Pumps Plumbing Products Dairy/Food Processing Earthmoving & Construction Equipment

• Features: Smooth surface finish, High durability, Long lasting, High efficiency, Rigid and tough, Wide usage

Caterpillar Tractor Spare Parts are highly acclaimed for their durability and low friction losses. We are engrossed in supply and export of Caterpillar Tractor Spare Parts from Maharashtra. We ensure that only defect free and optimum quality Caterpillar Tractor Spare Parts reach customers. Customers can purchase the Spare Parts at market leading rates.

diesel engine components, mini hydraulic cylinders, roll bending blocks

Automotive Engine Parts, Automotive Spare Parts, Automotive Engines

carburetor parts, Air Filters, Automobile Switches, Fuel Filters