carbon steel
65 - 80 Per
100 Kilogram (MOQ)
SAE-1015, SAE-1018, C-45, C-50, C-60, EN -1(A)L, 40Cr4
carbon steel
Get Price Quote
We are offering ultra a grade quality of carbon steel we offer from diameter 200mm to 1000mm of mild steel, en series and alloy steel. We provide rough-finished punches and cavity as per drawing to our clients. We are leading stockiest & dealers of round bars since last 25 years, range :- diameter 200mm to 1200mm ( 8 inch to 45 inch ) material :- ms , en8 , c45 , en19 , en24 , en31 , k310 , etc items :- solid round bars, taper and step down diameter bars (for punchespistons) hollow round bars and pipes products :- marine and ship shaft, ultra a grade
Best Deals from Carbon Steel
carbon steel
Get Price Quote
Our Company RENI STEEL (INDIA) was established in the year 1997 and is primarily engaged in Stockiest & Suppliers, Importers & Exporters of Stainless Steel, Alloy Steel, Carbon Steel, Pipes & Tubes, Sheet, Plates, Bars and Largest manufacturer of Pipe fittings & Flanges.
carbon steel
Get Price Quote
We are one of the leading traders and suppliers of Carbon Steel
carbon steel
Get Price Quote
Alloy Pipe Impex, we carry a full inventory of Carbon Steel Seamless Pipes and Tube Products in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. Carbon Steel Seamless Pipe Carbon Steel Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission. We Supply Carbon Steel in ASTM A106 Grade B, ASTM A106 Grade C, ASTM A53 Grade B, ASTM A333 Grade 3, ASTM A333 Grade 6, ASTM A334 Grade 1, ASTM A334 Grade 6, ASTM A179, ASTM A192, ASTM A210 A1, ASTM A210 C.The grade indicates the testing methods required for a given application. It is critical that structural grades of Carbon Steel Pipe not be used for Pressure or Fluid applications Alloy Pipe Impex specializes in Carbon Steel Seamless Pipes and Tube with years of Experience in Manufacturing Carbon Steel Seamless Pipes and Tube. we offer high quality, lower cost but the best service. astm a106 carbon steel seamless pipes and tubes Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service ASTM A106 pipe (also covered in ASME specifications as S/A 106) is the standard specification for seamless carbon steel pipe for high-temperature service. Most common uses are in refineries and plants when gasses or fluids are transported at high temperatures and pressures. Federal Steel Supply is a world leader in the supply of A106 / SA 106 pipe and stocks a full range of grades B/C in a size rage of NPS 1/8″ to NPS 48″, with nominal (average) wall thickness as given in ANSI B36.10. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification*. Pipe ordered under this specification shall be suitable for bending, for flanging, for welding, and for similar forming operations. A full range of A106 stock is available in Schedules 10 through 160, STD, XS, XXS. Unscheduled wall thicknesses available up to 4 inches. A106 PIPE SPECIFICATIONSA/SA106NPS 1/4″- 30″Schedules 10 through 160, STD, XH and XXH Scope ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. Suitable for bending, flanging and similar forming operations.NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified. Process Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.Steel cast in ingots or strand cast is permissible.Hot-finished pipe need not be heat treated.Cold-drawn pipe shall be heat treated after the final cold draw pass. ASTM A53 GRADE B SEAMLESS PIPES Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8 to NPS 26. The steel categorized in this standard must be open-hearth, basic-oxygen or electric-furnace processed and must have the following chemical requirements: carbon, manganese, phosphorus, sulfur, copper, nickel, chromium, molybdenum, and vanadium. The tubing shall undergo a seamless or welding process. Tension, bend, and flattening tests shall be performed to make sure that it must adhere to the mechanical properties of the standard. The hydrostatic test shall be applied, without leakage through the weld seam or the pipe body. Nondestructive electric test shall be made to make sure that the full volume of the pipe must be in accordance with the standard. The purchaser shall have the right to perform any of the inspections and tests set forth in this specification where deemed necessary to ensure that the pipe conforms to the specified requirements.. A53 PIPE SPECIFICATIONSA/SA 53NPS 1/4″- 30″Schedules 10 through 160, STD, XH and XXH Scope ASTM A53 pipe covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded pipe is not intended for flanging. Purpose for which pipe is intended should be stated on order. ASTM A333 GRADE 6 SEAMLESS PIPES Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness ASTM A333 (ASME S/A-333) Pipe grades permit low temperature service. This specification covers nominal (average) walled pipe almost exclusively in seamless. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on low-temperature impact properties. A333 pipe is furnished to nine different grades designated by numbers 1, 3, 4, 6, 7, 8, 9, 10, & 11. Discussed herein are Grades 1, 3 and 6. A333 PIPE SPECIFICATIONSA/SA 333NPS 1/4″- 30″Schedules 10 through 160, STD, XH and XXH Scope ASTM A333 covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties. ASTM A333 GRADE 1 SEAMLESS PIPES Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness This guide covers standard specification for several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, copper, cobalt, and molybdenum. The number of tubes in a heat-treatment lot shall be determined from the size of the tubes. The tubes shall have a hardness number that does not exceed the prescribed Rockwell and Brinell hardness values. Several grades of steel shall conform to the following tensile properties: tensile strength, yield strength, and elongation. For Grades 1, 3, 6, 7, and 9, the notch-bar impact properties of each set of three impact specimens, including specimens for the welded joint in welded pipe, shall not be less than the prescribed values. Several mechanical tests shall be conducted, namely: flattening test; flare test (seamless tubes); flange test (welded tubes); reverse flattening test; hardness test; and impact tests. Hydrostatic or nondestructive electric test shall also be performed. Materials shall be tested for impact resistance at the prescribed temperature for the respective grades. Impact temperature reduction values shall be by any amount equal to the difference between the temperature reduction corresponding to the actual material thickness and the temperature reduction corresponding to Charpy specimen width actually tested. A334 PIPE SPECIFICATIONSA/SA 334NPS 1/4″- 2″Thickness 01 mm to 08 mm. Scope This specification covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties. ASTM A179 SEAMLESS TUBES Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, and sulfur. The steel materials shall also undergo hardness test, flattening test, flaring test, flange test, and hydrostatic test. A179 PIPE SPECIFICATIONSA/SA 179NPS 1/8″- 3″Thickness 1.2 mm to 08 mm. Scope This specification covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus.This specification covers tubes 1/8 to 3 in. [3.2 to 76.2 mm], inclusive, in outside diameter. Note 1—Tubing smaller in outside diameter and having a thinner wall than indicated in this specification is available. Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in outside diameter or with a wall thickness under 0.015 in. [0.4 mm]. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. ASTM A192 SEAMLESS TUBES Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, and sulfur. The steel materials shall also undergo hardness test, flattening test, flaring test, flange test, and hydrostatic test. A192 PIPE SPECIFICATIONSA/SA 192NPS 1/8″- 3″Thickness 1.2 mm to 08 mm. Scope This specification covers minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service.The tubing sizes and thicknesses usually furnished to this specification are 1/2 in. to 7 in. [12.7 to 177.8 mm] outside diameter and 0.085 to 1.000 in. [2.2 to 25.4 mm], inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification. Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] inside diameter or 0.015 in. [0.4 mm] thickness. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. ASTM A210 SEAMLESS TUBES Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes This specification covers seamless medium-carbon steel boiler and superheater tubes. The specification also covers minimum-wall-thickness, tubing sizes, boiler flues including safe ends, arch and stay tubes. The specification provides tensile and hardness properties but only applicable to certain size limitations. Material manufacturing shall be killed. Tubes shall be made by seamless process, marked as either hot-finished or cold-finished. Surface condition shall be specifically stated in the order. Chemical composition shall conform to the requirements. Elemental composition other than listed here shall not be permitted. Tension test, flattening test, flaring test, hardness test, hydrostatic or nondestructive electric test shall be made on specimens. Superheater tubes shall be formed without defects and shall withstand expansion, beading, forging, welding, and bending. A210 PIPE SPECIFICATIONSA/SA 210NPS 1/4″- 2″Thickness 01 mm to 08 mm.
high carbon high chromium steel
160 Per Kilogram
Stainless Steel, Carbon Steel
Get Price Quote
we are pleased to introduce ourselves to your esteemed organization one of the leading suppliers and stockiest of industrial raw materials specially. Stainless steel and non-ferrous metals, for the last twenty-five years. Our scope of supply covers all over india, thus we have our own specialized list of products, designed to meet the requirements of 21st century industries. Since you are one of the leading industrial organizations, using these products on a larger scale, we furnish, in nutshell of items available with us: we are manufacture of all types(pipe fitting,flanges ferrule fitting & valve) & we would like to introduce to you. We are doing job work also in precision components and industrial product as per party requiremt. Manufacture of stainless steel, carbon steel & alloy steel - pipe, tube, fittings & dairy fittings as elbow, tee, stub end, reducer, ball valve, dairy union, flanges,nut bolt,waishar. A105 & a182 etc. In grade astm tp304, 304l, 316, 316l, 310, & also in cupro nickel 90/10, 70/30 and nickel base alloys etc. We also deal with ibr certified fitting, flanges, and pipes & tubes.
Carbon and Alloy Steel
Get Price Quote
Range :15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS Form :Seamless / Erw / Welded in Round & Square . Carbon Steel : ASTM / ASME A 53 GR. A , B ASTM / ASME 106 GR. A , B ,C . API 5L GR. B , API 5L X 42 , X 46 , X 52 , X 60 , X 70. ASTM / ASME A 691 GRA , B ,C Alloy Steel: ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91 ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
carbon steel
Get Price Quote
We Are One Of The Leading Stockist in Carbon Steel Pipe : ASTM A 106, A 53, API A 5L Gr A, B, C, ASTM A 333, Gr 1 to 6 (IBR & NON IBR)
carbon steel
Get Price Quote
ASTM, A234, WPB A420, WPL3 A420, WPL6 MSS-SP-75, WPHY 42 46 52 56 60 65 70
carbon steel
Get Price Quote
carbon steel
Get Price Quote
carbon steel, alloy steel, Pipe Fittings, plastic elbows, metal bending
carbon steel
Get Price Quote
carbon steel, alloy steel, bandsaw cutting, bright brass, Die Steel
carbon steel
Get Price Quote
Kailash steel engineering is the profound organization involved in manufacturing and exporting of carbon steel in india.
carbon steel
Get Price Quote
Carbon steel is a steel alloy consisting of iron and carbon. Several other elements are allowed in carbon steel, with low maximum percentages. They are manganese, with a 1.65% maximum, silicon, with a 0.60% maximum, and copper, with a 0.60% maximum. Other elements may be present in the steel in quantities too small to affect its properties.
carbon steel
Get Price Quote
We are offering Carbon Steel at very market leading prices company.
high yield carbon steel
Get Price Quote
high yield carbon steel, brass alloy, Titanium Alloy, super duplex
carbon steel
Get Price Quote
carbon steel, Stainless Steel Corrugated Tubes, boiler plates, BQ PLATES
carbon steel
Get Price Quote
carbon steel, Mild Steel Pipe, Pipe Fittings, Stainless Steel Pipe
carbon steel
Get Price Quote
carbon steel, alloy steel, Ferrous Metal, nonferrous metal, Nut Bolts