Cartridge Seals Dealers in Jogeshwari West, Mumbai

• Type: Cartridge Seal
• Material: Stainless Steel
• Standards: ANSI
• Finish: Polished
• Pack Type: Box

Additional variants available for ANSI pumps Balanced Cartridge Independent of direction of rotation Single seal Technical Features Cost-effective Easy installation due to pre-assembled unit (reduced down-times) Ideal seal for standardizations No damage caused by dirt entered 1 during assembly No damage of the shaft by dynamically loaded O-Ring Universal applicable for packings conversions, retrofits or original equipment Typical Industrial Applications Chemical industry Food and beverage industry Petrochemical industry Pharmaceutical industry Universally applicable Water and waste water technology Centrifugal pumps Eccentric screw pumps Process pumps Materials Seal face -  Silicon carbide (Q1), Carbon graphite resin impregnated (B), Tungsten carbide (U2) Seat -  Silicon carbide (Q1) Secondary seals -  FKM (V), EPDM (E), FFKM (K), Perflourocarbon rubber/PTFE (U1) Springs -  Hastelloy® C-4 (M) Metal parts -  CrNiMo steel (G), CrNiMo cast steel (G)   Performance Capabilities CMS-SN, -SNO, -QN, -TN Sizes -  Upto 100 mm (Upto 4.000") Other sizes on request Temperature -  t= -40 °C ... 220 °C (-40 °F ... 428 °F) (Check O-Ring resistance) Sliding face material combination BQ1 Pressure -  p1 = 25 bar (363 PSI) Speed = 16 m/s (52 ft/s) Sliding face material combination Pressure -  p1 = 12 bar (175 PSI) Speed = 10 m/s (33 ft/s) Permissible axial movement -  ± 1.0 mm, d1 “75 mm ± 1.5 mm

We are offering Mechanical Cartridge Seal. Applications Generally Used in sewage applications, waste water pumps, & fuel injection pumps Operating Limits Shaft Dia. : 10 to 100mmPressure : up to 10 BarsTemperature : -20 to 150 C.

• Faces: Carbon, Tungsten Carbide
• Secondary Seals: Viton/PTFE/FEP/GFT/FFKM
• Hardware: SS316/HAST-C/Alloy-20
• Shaft Dia: 25...80mm(1.0 Inch..3.5 Inch)
• Pressure: 25-30 Bar(max)
• Temperature: 30-350 Deg C
• Velocity: 22-30m/s

Cartridge Seals Single Spring Seals Multi Spring Seals Metal Bellow Seals   Application : Single Slurry Cartridge Seal is as cartridge unit specially design for slurry applications. This seal is perfect for using in such abrasive and rugged media. Further, this range is widely used in various industries for different applications. A self contained unit consisting of a single seal assembly, mating ring, gland, sleeve, etc., which is pre-assembled and preset by the manufacturer prior to installation. Asuperior upgrade to component seals in both time saved and installation errors avoided.

Presenting you Double Cartridge Seal. Features. 1. Easy to Install, retrofit design. 2. Spring Isolated design, interrupt free operation in media containing Solids. 3. Available in Variants, with different material and secondary seals, for operations in Chemically charged applications. 3. Sizes: 20 to 180 mm and for sizes above please contact Fi-bros Engineering. Applications. General Chemicals Petrochemicals Food processing Waste water technology Operating Parameters Pressure: 15-20 kgf/sq.cm Temp: 220 degree celcius RPM: 1500 to 2900

• Shaft Dia. :: 25 to 150mm
• Pressure :: up to 10 Bars
• Temperature :: -50 to 280oC

Cartridge Type Seal are Developed Handling of Various types of Liquid Like a Edible Oil Chilled, Petrochemical, Clean & Hot Water, Alcohol, Pharma products, Etc Readymade unit easy for installation

We are providing our customers a wide range of Cartridge Seals. These cartridge seals are widely finds its applications in various industrial sectors.   Item Code: LS62   LS62 Cartridge seals are self-contained units consisting of a shaft sleeve, seal, and gland plate. The unit is fitted onto the pump shaft as a built assembly, and no further fitting is required. Cartridge seals are an attempt to over-come the fitting problems of conventional seal, They are supplied in single and double form, and the gland plate is often fitted with various tappings to provide for flushing, cooling water injection, and disaster control.   The cartridge can overcome several limitations of the standard pump gland. Tangential tappings for introducing fluids into the gland cause less disturbance to the seal face than the radial tappings often found on pump units. Look again at the tapping provided for flush water to the packed gland, a tangential tapping would provide a less turbulent water source. For a packing gland this may not be important but to a mechanical seal it can be another adverse condition with which to cope.The setting position of the seal is set by the cartridge design, but the seal unit should not be screwed to the shaft until the gland plate is secured to the pump and any adjustments made to the shaft position. Once this has been completed the set screws can be tightened and the spacers removed.So, what can go wrong. The design works to eliminate many of the common causes of seal failure on installation and because the seal is presented on its own shaft sleeve any damage that might be caused by a conventional seal to the pump unit is also eliminated. Materials :   •   Seal Faces : Ceramic /Sic/Carbon Vs Ceramic /RB Sic./TC •   Secondary Seals : Viton/PTFE/GFT •   Metal Components : SS-316   Operating Limits :   •   Shaft Dia. : 25 to 150mm •   Pressure : up to 15 Bars •   Temp. : -50 to 180°C •   Speed : up to 25 m/s

• Usage: Industrial
• Working Pressure: 2.5 mpa
• Speed: 3000 rpm
• Model Name/Number: Series-14SC
• Brand: Mexico Engineering
• Shaft Diameter: 220 mm
• Seal Type: Sigle Cartridge

• Country of Origin: India
• Type: Mechanical Seals
• Brand Name: Hydro Serve
• Warranty: 1 Year
• Shape: Round
• Chemical Resistance: Yes
• Condition: New
• Finishing: Polished
• Automation Grade: Automatic
• Specialities: Good Quality
• Packaging Type: Box
• Material: MS
• Speed: Up to 25 m/s
• Pressure: Up to 45 Bars
• Shaft Diameter: 25 to 150 mm
• Temperature: -50 to 160 deg C

To make our transactions secure, we allow our clients to make payment through both offline and online mediums. In order to deliver the best in class finished products, we make use of quality-tested raw material and modern work methods. Also, we make sure that the material is sourced from the reliable places only.   Features : Sturdy material Precision made Industrial application

• Material: ss, silicon carbide, tungsten carbide, carbon, rubber, PTFE and others
• Usage: Industrial
• Color: multiple colours
• Size: 12mm and above
• Country of Origin: Made in India
• Brand: maxcare
• Model Name/Number: Cartridge Seal

• Seal Face: Car, Sic, Cer, Scer,RV Sic,TC
• Secondary Seals: Viton / PTFE / GFT/FFKM
• Metal Parts: SS 3'16, 904 L. Alloy 20
• Pressure: Up to 15 bars
• Temperature: (-)80c to (+)150c
• Speed: Up to 25 m/s
• Sizes: 25 mm to 150 mm

Dual Cartridge Seals is a factory assembled cartridge unit specially design for slurry & viscous media.Double Cartridge Seal is a self contained unit consisting two mechanical seals in a seal chamber in any combination which can utilize a pressurized barrier fluid or a non pressurized buffer fluid. These seal arrangements are a superior upgrade to a single cartridge Seals when it is imperative the media does not leak to atmosphere. A dual cartridge seal very often is formed with tandem configuration (face-to-back), or face-to-face configuration. In a tandem configuration, the outer seal essentially works as backup for the primary seal.in a face-to-face arrangment,the outer seals creates a barrier. When any issue happens with the inner seal    Application Sludge & Syrup pumpPaper Industries.Petrochamicals.Petrolium Refinery.

• Usage: Petrochemical, Refinery, Chemical.
• Speed: 2900 RPM
• Pressure: 10 Bar (max.)
• Shaft Diameter: 85 mm
• Temperature: 200 Degree C
• Model Name/Number: PS35(CX)
• Material of Construction: Faces : Carbon, Silicon carbide, Tungsten carbide, Lecrolloy, Ceramic. Elastomers : PS35E – FKM, FFKM, EPDM, NBR, Aflas PS35W – PTFE, GFT. Metallurgy : SS316, SS316L, SS304, Hastelloy-C, Monel, Alloy-20.  

Graded among the top suppliers of Metal Bellow Cartridge Seals, we can deliver the product at inexpensive prices. With features like superior quality and unmatched grade, our product range is the best one available in Mumbai(India). Application : High Pressure Metal Bellow Seal is widely used in assembly pumps, clinker grinders, sludge pumps, pulp & syrup pumps, oil pipeline pumps and boiler feed water pumps.   Operating Limits :  Pressure  -  2000 kpa Temperature  - 400 C Speed  -  20m/sec Sizes  -  1. 125" to 4. 00" Material  -  Seal Face  - TC/TC, Sic/Sic, Sic/Ceramic Secondary Seals  - Viton/PTFE/GFT/Karlez Metal Parts  - SS-316/Hast-C/Monel

• Usage: CRI Pumps, CNP Pumps .
• Size: 12, 16, 22 mm
• Pressure: 30 kg/cm2
• Shape: Round
• Country of Origin: Made in India
• Model Name/Number: AST-CT-1001
• Brand: Advance Seals Technology
• Temperature: -40 to 240 degree C

• Material: Stainless Steel
• I Deal In: New Only
• Packaging Type: Box
• Tensile Strength: 100-300 Mpa
• Surface Finishing: Polished
• Weight: 100-300 gm

Mechanical seal type cartridge for high pressures heavy duty in petrochemical industry and sealing of wide range of products such as crude, gasoline, lpg, water with muds. Designed according norm api682

High Pressure Metal Bellow seals Metal Bellow Cartridge Seal Has its unique Features which include Easy to replace individual seal-wear parts. Single acting Inside mounted. Multi spring design. Springs are out of product, minimizes corrosion and stress related failure. Dynamic elastomer moves on nonmetallic surface eliminating fretting Faces. designed for optimum heat dissipation. Application High Pressure Metal Bellow Seal is widely used in assembly pumps, clinker grinders, sludge pumps, pulp & syrup pumps, oil pipeline pumps and boiler feed water pumps. Operating Limits Pressure : 2000 kpa Temperature :400 C Speed : 20m/sec Sizes : 1. 125" to 4. 00"

• Size: 35mm
• Speed: 2900 rpm
• Material: Carbon
• Pressure: 15 bar
• Model Name/Number: LSNC
• Shaft Diameter: 28.57mm
• Temperature: -40...250 Deg. C
• Velocity: 18 m/sec
• Brand: LE-CON
• Metal Parts: SS316

• OPERATING LIMITS:: Shaft Diameter 'd'
• 20mm to 100mm: Pressure 'p'
• Vacuum...12 bar (max): Temperature 't'
• Ambient to 100 ºC(max): Shaft speed 'n'

Rotomech single-acting cartridge mechanical seals are complete pre-assembled units ready for insatallation and operation. These cartridge mehanical seals are multiple springs (protected) type, balanced ,independent of direction of rotation, stationary design with long-hole fixing. Cartridge Assembly aids to fix mechanical seal in position ready for installation. These cartridge mechanical seals are designed for technically demanding applications - high degree of capacity for solids. Complete mechanical seal with sleeve and cover with circulation connections (quench optional). Exclusive use of solid seal face/ stationary seat - self-aligning arrangement in stationary design ensures safety of operation and usually increases service life. Mechanical seal is also very suitable with retrofitting of packing; usually fits into packing stuffing box compartments. Mechanical seal fits into DIN space for installation. 

We bring forth an entire array of Cartridge Seals such as custom designed cartridge seals, mechanical cartridge seals and many more. These seals are mainly used in media containing harsh and solid particles. Cartridge Seals are used for petroleum refinery, paper industries petrochemicals etc. Due to its cartridge design these are extremely easy to install. Additionally, we have carved out a niche as one of primary mechanical cartridge seals manufacturers from India. Salient features: Spring completely protected from the product. Easily handle media containing abrasive particles and solids Axial compensation of movement 1 mm Perfect for standardization purposes Ease of installation due to cartridge design Applications: Specially used in paper industries, petrochemicals, petroleum refinery etc. Material: Seal Faces : Ceramic/Sic/Carbon Vs Ceramic/RB Sic./TC Secondary Seals : Viton/PTFE/GFT Metal Components : SS-316/Alloy20/Hast-B/Hast-C Operating Limits: Shaft Dia. : 25 to 150mm Pressure : up to 15 Bars Temp. : -50 to 180°C Speed : up to 25 m/s

These type Cartridge Seal is generally used in chemicals, solvents, hydrocarbons & petrochemicals. Materials Seal Faces: Si Carbon TC Vs Ceramic TC Si Secondary Seals: Viton PTFE GFT Niton Metal Parts: SS-304, SS-316, SS-316L, Hastelloy Operating Limits Shaft Dia: 25mm to 100mm Pressure: 15 Bars (max) Temperature: -40°C to +180°C Speed: 2900 rpm (max)

• Size: 5 to 100 mm
• Pressure: 15 Bars (Max)
• Temperature Range: -40 to +180 Degree C
• Material: SS-304, SS-316
• Model No.: RI-109U/CR
• Shaft Diameter: 10 mm to 100 mm

To meet diverse requirements of several industries, we offer, high-grade Balanced Cartridge Seals in the market. The Balanced Cartridge Seals are precision made and designed by adopting ultra-modern tools and machines. These Balanced Cartridge Seals are dimensionally accurate and properly tested on various parameters to ensure smooth working life. The clients can avail the Balanced Cartridge Seals from us in various sizes and dimensions as per the requirements.

Our range of Cartridge Seals is widely known high performance and high pressure seal. The Cartridge Seals offered by us are preassembled and are usually mounted with gland ring on a sleeve which enables it to fit directly over the pump shaft or shaft sleeve in conventional stuffing boxes of any make / type of pump. For maximum benefit, a seal must be set according to its correct working length, and must be fitted to its right position in the housing with clean face. Cartridge Seal manufactured by us provides a complete and easy solution to all the requirements. Easy to install, the Cartridge Seal is available in RCG series. Operating Limits Diameter : 18â€Â¦.. 100 mmPressure : 80 barTemperature : -20oC â€Â¦ +220oCSpeed : 20 m/s Application Clinker GrindersAsh Slurry PumpBoiler Feed Water PumpsSludge PumpPulp PumpsSyrup PumpsSoft Slurry Pumps Two Versions Balanced Seal - WOBUn-Balanced Seal – WO

• Material: ss, silicon carbide, tungsten carbide, carbon, rubber, PTFE and others
• Usage: Industrial
• Color: multiple colours
• Size: 12mm and above
• Country of Origin: Made in India
• Brand: maxcare
• Model Name/Number: Cartridge Seal
• Metal Parts: ss, silicon carbide, tungsten carbide, carbon, rubber, PTFE and others