Century Inks Pvt Ltd Kandivali, Mumbai, Maharashtra

Century’s Tex Marker is a collapsible aluminum writing device filled with ink used for marking on fabric samples for identification. It is used by textile mills & processing houses before dyeing and finishing processes of grey fabric for identification, quality control, shrinkage, pilferage etc. The marking remain permanent, bright & opaque even after the dyeing & finishing processes are completed. It is widely used in textile industry for dyeing, bleaching, hosiery, knitting, scouring & weaving processes.Advantages: Bright & Opaque markings on all kinds of fabrics including cotton, denims, polyester, wool etc. Permanent, Heat-Proof, Quick drying & No bleeding. Resistance to Acids, Alkalis & other chemical aggressions in finishing processes. Markings can withstand all textile sorting / sizing and finishing processes. Quick identification of lots upon fabrics dyed in dark shades also. Most economical method of marking on gray fabrics before processing. Available in 3 ball-point sizes for different types of fabrics Ink content: 60 ml (70g) Key provided to squeeze out the ink from the marker for optimum utilization & smooth flow. Direction of Use: Open cap. Insert the aluminum key provided with the marker at the bottom end of the tube & start rolling upwards for pressure. Mark on 90 degree angle for smooth ink flow. Keep rolling the key as pressure reduces. Do not fold the tube back & forth as it could lead to puncture. Do not use on other surface other than fabrics. Put the cap back on after use.  

Century’s Stainless Steel Marker is an industrial grade valve action paint marker for all surfaces. It is made up of an aluminum body filled with ink & a felt-tip with valve action for smooth ink flow. The ink has very few traces of chloride, sulphur, low melting metals & halogens which won’t contaminate or scath the surface being marked. The ink formulation meets or exceeds the specifications for GE Nuclear Energy, GE Aircraft Engines and the US Energy Research and Development Administration (nuclear grade). It can mark on all surfaces including metal, plastics, steel, ceramic, glass, concrete etc. The markings do not fade or remove under adverse weather conditions & heat too. It is ideal for welding, aircraft industries, marine industries, power plants, automotive plants, and oil and natural gas refineries.Advantages: Valve-action paint marker with hard aluminum body & cap on top. Permanent, weather-proof markings on all surfaces. Ink formulation doesn’t scath or adversely affects the surface being marked. Works on all surfaces like steel, metals, alloys, plastics, glass, concrete etc. Confirms to GE Standards of Nuclear Energy, GE Aircraft Engines & US Energy Research and Development Administration. Ideal for welding, aircraft industries, marine industries, power plants, automotive plants, and oil and natural gas refineries Directions of Use: Open cap. Shake the marker well before first use. To push ink press the nib a few times until you see the ink on the tip. Put the cap back on after each use. Caution: Avoid contact from eyes or flames. Ink is harmful if consumed.  

Century's UV Security Marker is a felt tip paint marker with applications in wide range of industries including hospitality industry, hotel industry, manufacturing, security etc. Its marking are not visible in normal light & only visible in black light or 'UV light'. It is made up of a hard aluminum body filled with ink and felt-tip with valve action for smooth ink flow. It is used in hotels & hospitals for quality checks and security markings. It is also used in manufacturing units, automobile industry, event industry, repair workshops, laundry, clubs, army etc. The markings made by the marker are permanent & weather-proof. It works on all porous & non-porous surfaces including metal, plastic, glass, ceramic, rubber and stone. The ink is xylene free. It is also known as invisible marker as the markings are not visible under normal daylight. The marker is very popular in Europe & America and widely used across all kind of sectorsTip size: 2mm Advantages: Valve-action paint marker with hard aluminum body & a cap on top. Permanent & weather proof markings on all surfaces. Markings are only visible under UV (Ultra Violet) or Black Light. Works on all surfaces like steel, metals, alloys, plastics, glass, rubber, ceramics, concrete etc. Ideal for Hospitality Industry, Event Industry, hospitals, hotels, army, repair workshops, security etc. Directions of Use: Open cap. Shake the marker well before first use. To push ink press the nib a few times until you see the ink on the tip. Put the cap back on after each use. Caution: Avoid contact from eyes or flames. Ink is harmful if consumed .  

Century’s Pump-type Metal Marker is unique marking device for permanent & fade-proof marking on any surface. Its an industrial grade ball-point marker which are bright, opaque & weather-proof. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease. Advantages: Viscous ink makes Permanent, Bright & Opaque Markings on all Surfaces including metals, steel, glass, rubber, wood, concrete etc. Hard Aluminum body makes it difficult to break, puncture or leak compared to other tube markers. Rubber valve at bottom makes it very easy to use with continuous ink flow. Zero Wastage compared to Tube type markers. Stainless steel tip with roller ball point enables easy & smooth markings on Wet, Oily, Dry, Greasy & Extremely Rough Surfaces. 60 ml ink content (5-6 times of conventional paint markers) Direction of use: Remove Cap. For cold start press the rubber ball/valve 4-5 times at the bottom for ink flow at the tip. Mark vertically at 90-degree angle & ensure the ball presses the surface for smooth ink flow. As pressure reduces, press the rubber valve 2-3 times to continue writing. Do not press the rubber bulb when not in use as it will lead to increase ink pressure. Clean the tip & put the cap back on when after each use. Caution: Harmful if swallowed or intentional inhalation. Avoid contact with eyes. Keep away from open flame. Please test before use.

Century’s Bottle Paint Marker is a refillable marker with roller ball point tip & permanent ink. It is made of hard plastic shell bottle with stainless steel tip which when squeezed pushes the ink towards the tip for ink flow. It makes bright, permanent & opaque markings on all kinds of surfaces. It even works on oily, greasy & wet surfaces which are difficult to mark with regular paint markers. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It is ideal for industries where the markers are used in bulk quantity as it’s very cost effective.Advantages: Viscous ink makes Permanent, Bright & Opaque Markings on all surfaces including metals, steel, glass, rubber, wood, concrete etc. Refillable & Cost Effective Ergonomic size makes it very easy to use. Stainless steel tip with roller ball point enables easy & smooth markings on Wet, Oily, Dry, Greasy and extremely rough surfaces. 25 ml ink content (5-6 times of conventional fine tip paint markers) Ideal for use in Welding, Metal Cutting, Automation Industry, Spare Parts, Ship Building, Construction, Dies & Moulds, Scrap, Oil & Gas Industry Pre-Cast Cement Sheets etc. Directions of Use: Remove Cap. Shake the bottle before use. To refill, just open the bottle from the top, fill the ink & close tightly. Put the cap back on after each use. Store in dry place without direct sunlight.  

Century’s Tube Type Metal Marker is a unique marking device for permanent & fade-proof marking on any surface. Its an industrial grade ball-point marker which are bright, opaque & weather-proof. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease. Its made of up of an aluminum tube filled with ink for making smooth and neat markings on any surface. The marker can also write under water. Advantages: Viscous ink makes Permanent, Bright & Opaque Markings on all Surfaces including metals, steel, glass, rubber, wood, concrete etc. Stainless steel tip with roller ball point enables easy & smooth markings on Wet, Oily, Dry, Greasy & Extremely Rough Surfaces. 60 ml ink content (5-6 times of conventional paint markers) Cheap & effective alternative to paint & brush markings. Ideal for industrial applications like Welding, Dies & Moulds, Automation, Automobile, Construction, Precast Cement Sheets, Maintenance & Repair, Ship Building, Oil & Gas Industry etc. Directs of Use: Open Cap. Hold the marker vertically at 90-degree angle and press the ball to surface to write. Insert the key from the bottom of the tube and roll it up as ink flow reduces. Clean the tip and put the cap back on after each use. Use before 12 months for better result. Drying Time: 30-45 minutes (Touch Dry in 5-7 minutes) Caution: Do not fold the tube back & forth to avoid leakage and breakage. Harmful if swallowed or intentional inhalation. Avoid contact with eyes. Keep away from open flame. Please test before use.

Losing garments is a thing of the past once they have been marked with the Century laundry marker! Our laundry marker is permanent, waterproof, & odourless. It can withstand even dry cleaning & hot washes. It is made of hard aluminum tube & has a unique needle-point tip and the dense ink which is light resistant & opaque. Conventional laundry markers fade away with few washes however due to our proprietary ink formulation, our marker remains permanent even after repeated washes. The ink content is 30 ml which is 5 times the conventional laundry markers. It is ideal for large families, hospitals, hostels & hotel industry. It works on all fabrics including cotton, polyester, denim, synthetic, wool etc.It is recommended that the Century Laundry marker is used on fabric only and beware that some ink may spread when used on synthetic fabrics. Also, to lengthen wear and wash resistance of the marking, iron it after application. Directions of Use: Remove Cap Simply press the flexible rubber ball located at the bottom 4-5 times for cold start. Once ink starts to flow, you can start writing. When the ink flow reduces, gently press the rubber ball 2-3 times to start again. Do not press the rubber bulb when not in use. Put cap back on when finish using. Advantages: Write sharp, defined & bright marks on any fabric. Perfect for marking on all types fabrics and synthetics. Ideal for marking on Uniforms, Undergarments, Bedsheets, Covers, Socks, Pants, T-shirts, Shirts, Towels, Napkins etc. Stays permanent through repeated washing, dry cleaning and bleaching processes Easy to use and fully automatic. Mark at all angles, even upside down 30 ml ink content (5-6 times more than conventional fabric markers)  

Century’s Hot Marking Chalk is a unique tool to mark onto red hot surfaces. It is widely used in industrial applications for coding & identification purposes. It makes very clear & bright markings on all kinds of metals, alloys, steel etc. and remains permanent up to 1400 degree Celsius (2500 F). The markings don’t fade, char, peel or drip away from the surface. They can work on any kind of surface rough, scraped; smooth etc. The advantage of the chalk over other markers or chalks is that the marker can be used when the surface temperature of the object is very high. These chalks are used for marking metals for laser cutting, instant and inflatable markings at varied temperatures, rough surfaces of steel castings, metal forgings, stainless steel sheets, metal plates, concrete slabs, Stripped & Rolled Items, Ingots Billets etc.Advantages: Ergonomic size makes it very easy to hold & write. Works on any kind of surface rough or smooth Markings do not fade, drip or chip off even at high temperature (up to 1400 degree Celsius) Markings can be made even when surface temperature is very high Ideal for Metal forging, Ingots, Billets, Hot Coils, Concrete slabs, stainless steel sheets, metal plates etc.  

Century's High temperature marker is an industrial grade valve action paint marker for any surface. The ink is formulated specially for marking surfaces & objects that are exposed to very high temperature & harsh environments. It is made up of a hard aluminum body filled with ink and felt-tip with valve action for smooth ink flow. The markings have to be made at room temperature & works on all kinds of surfaces including steel, metals, ceramic, glass, rubber, concrete, alloys, wood etc. The markings made by the marker remain permanent at high temperatures up to 500-1093 degrees Celsius (930-2000 F) depending on the colour. The marker works on all porous & non-porous surfaces including metal, glass, ceramic, wood, plastic, rough, smooth etc. Ideal for Iron & steel, Automobile, Welding, Ceramic & Glass manufacturers.   Advantages: Valve-action paint marker with hard aluminum body & a cap on top. Permanent & Heat-proof markings on all surfaces. Markings remain visible up to 500-2000 degree Celsius (930-2000 F) Works on all surfaces like steel, metals, alloys, plastics, glass, rubber, ceramics, concrete etc. Ideal for Iron & Steel Industry, Welding & Metal Cutting, Glass manufacturing, Ceramic Manufacturing, Automotive Industry, Power plants etc. Directions of Use: Open cap. Shake the marker well before first use. To push ink press the nib a few times until you see the ink on the tip. Put the cap back on after each use. Caution: Avoid contact from eyes or flames. Ink is harmful if consumed.

Century’s Everon Marker is a unique marking device used in textile mills & factories for permanent marking on gray cloth & fabrics. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing. It is also known as 'pump-type marker' or 'TEXPEN’. The viscous ink makes permanent, bright & opaque markings on all kinds of fabrics and remains visible even after the dyeing & other finishing processes. It works on all kinds of fabrics like cotton, denim, polyester, wool, silk, linen etc. It is widely used in dyeing houses & textile mills in processes like dyeing, scouring, bleaching, hosiery, knitting & weaving. Everon Marker is designed whereby it can be used up to last drop of ink when compared to traditional tube type markers where almost 20% of ink goes waste or we are unable to use after squeezing, as it is difficult to even hold the tube. Advantages: Permanent, Bright & Opaque Markings on any fabric. Markings are acid alkali resistant, heat resistant & remain permanent even after dyeing & finishing processes. Hard Aluminium body makes it difficult to break, puncture or leak. Works on all kinds of fabrics including cotton, silk, polyester, wool, denim, linen etc. Rubber Valve at bottom enables smooth & automatic ink flow. Zero Wastage of Ink compared to tube type markers which waste 15-20% ink. Direction of Use: Remove Cap. For cold start press the rubber ball/valve 4-5 times at the bottom for ink flow at the tip. Mark vertically at 90-degree angle & ensure the ball presses the surface for smooth ink flow. As pressure reduces, press the rubber valve 2-3 times to continue writing. Do not press the rubber bulb when not in use as it will lead to increase ink pressure. Clean the tip & put the cap back on when after each use. Caution: Harmful if swallowed or intentional inhalation. Avoid contact with eyes. Keep away from open flame. Please test before use.

Century’s Cold Marking Chalk is industrial grade chalk for marking on any surface. The chalk has an ergonomic design which makes it easy to hold & write. It can mark on any surface like glass, metal, plastic, concrete, paper, rubber, wood etc. The markings made are bright, fade proof & water-proof. They won’t not chip or peel off easily & are UV resistant. The formulation has a superior marking performance compared to other chalks and works on oily, greasy, smooth, cold, rough & even wet surfaces. Advantages: Ergonomic design & very easy to use Bright, Fade-proof & Water proof markings on any surface Works on oily, wet, smooth & rough surfaces Ideal for temporary markings on metals, plastics, concrete, steel, wood etc Applicable for Welding, Metal Forging & Cutting, Tire Industry & Construction

Century’s Bleed Thru Marker is a permanent industrial grade valve action paint marker for construction purpose. The unique ink formulation enables the markings to bleed thru and be visible even after painting over the surface that has been marked. It is made up of a hard aluminum body filled with ink and felt-tip with valve action for smooth ink flow. It works on all surfaces like metals, concrete, iron, alloys, plastic, glass etc. The marker is available in two types for oil based primers and water based primers. It is widely used in construction industry, ship building and bridge fabrication on metals & alloys for Used for inspection, coding, layout or assembly operations. Tip Size: Chisel Tip 5 mm Advantages: Valve-action paint marker with hard aluminum body & a cap on top. Permanent & Bright Markings on all surfaces like metal, glass, steel, alloys etc. Markings Bleed thru and remain visible after painting over the surface. Ideal for Construction, Ship Building & Fabrication for coding & assembly operations Directions of Use: Open cap. Shake the marker well before first use. To push ink press the nib a few times until you see the ink on the tip. Put the cap back on after each use. Caution: Avoid contact from eyes or flames. Ink is harmful if consumed.