Chamunda Industries Bhuleshwar, Mumbai, Maharashtra

GST Number : 27CQNPS2138E1ZM
Contact Supplier Request A Quote
  • Vascomax Alloy Steels 350 / Maraging Steel 350

    Vascomax Alloy Steels 350 / Maraging Steel 350

    3,999 Per Kilogram

    1 Kilogram (MOQ)

    We are offering maraging vascomax alloy steels this iron-based family of steels are based on a composition of iron and 18 % nickel with additions of cobalt, molybdenum and titanium plus other elements. The most frequently specified 'c' grades contain a significant amount of cobalt. There are also 't' (titanium) grades which contain no cobalt and have a lower molybdenum content and a greater addition of titanium compared with the corresponding strength 'c' grades. The structure of the alloys are formed of fine martensite which then undergoes an aging process (precipitation hardening) giving them the name 'mar-aging' steels. Maraging vascomax alloy steels are characterised by ultra-high strength, simple aging treatment which minimises distortion, high levels of toughness, moderate corrosion resistance (similar to that of standard martensitic steels), good machinability (usually in the annealed condition) and good weldability. Applications are diverse and include missile casings, tooling, ordnance mounting blocks, high performance autosport components, couplings, bearings, load cells, landing gear components, transmission shafts, jet engine components and helicopter grade c350 uns k92890 maraging vascomax alloy steels alloy steel containing 12.0% cobalt and 4.8% molybdenum. This steel is produced by vacuum arc remelting, and provides a very high strength nominally 350 ksi tensile (2415 mpa) with an above average level of toughness. The alloy retains its strength up to 450oc and good notch impact is maintained down to minus 50oc and below. This material may be nitrided. C300 is usually supplied in the annealed condition where the microstructure consists of fine martensite before final heat treatment. Applications maraging vascomax alloy steels in aerospace maraging vascomax alloy steels in transportation maraging vascomax alloy steels for the military maraging vascomax alloy steels in manufacturing

    ...more
    Get Best Price
  • Slip On Flanges

    Slip On Flanges

    Request for Price

    Chamunda industries is a leading manufacturer and exporter of slip on that are being designed as per the national and international standard quality of raw materials and thus making sure of their durability and high quality. These flanges are being supplied in the course of suitable test certificates of standard raw materials and finished products. Our slip on flanges can further be customized in terms of thicknesses, sizes and specifications as per the specific requirements of our clients. We offer these flanges at market leading prices. Slip on flanges specification : standards : ansi b16.5, ansi b16.47 series a & b, mss sp44, asa, api-605, awwa, custom drawings size : 12" (15 nb) to 48" (1200nb) class : 150 lbs, 300 lbs, 600 lbs, 900 lbs, 1500 lbs, 2500 lbs, din standard nd-6,10, 16, 25, 40 etc. Flange face type : flate face (ff), raised face (rf), ring type joint (rtj) bs : bs4504 , bs4504, bs1560, bs10 din : din2527, din2566, din2573, din2576, din2641, din2642, din2655, din2656, din2627, din2628, din2629, din 2631, din2632, din2633, din2634, din2635, din2636, din2637, din2638, din2673 slip on flanges material & grades : stainless steel slip on flanges : astm a 182, a 240 f 304, 304l, 304h, 316, 316l, 316ti, 310, 310s, 321, 321h, 317, 347, 347h,904l duplex & super duplex steel slip on flanges : astm asme asa 182 f 44, f 45, f51, f 53, f 55, f 60, f 61

    ...more
    Get Best Price
  • Maraging steel MDN 250 Stockiest Mumbai India

    Maraging steel MDN 250 Stockiest Mumbai India

    Request for Price

    1 Kilogram (MOQ)

    We are offering chamunda industries maraging vascomax alloy steels this iron-based family of steels are based on a composition of iron and 18 % nickel with additions of cobalt, molybdenum and titanium plus other elements. The most frequently specified 'c' grades contain a significant amount of cobalt. There are also 't' (titanium) grades which contain no cobalt and have a lower molybdenum content and a greater addition of titanium compared with the corresponding strength 'c' grades. The structure of the alloys are formed of fine martensite which then undergoes an aging process (precipitation hardening) giving them the name 'mar-aging' steels. Maraging vascomax alloy steels are characterised by ultra-high strength, simple aging treatment which minimises distortion, high levels of toughness, moderate corrosion resistance (similar to that of standard martensitic steels), good machinability (usually in the annealed condition) and good weldability. Applications are diverse and include missile casings, tooling, ordnance mounting blocks, high performance autosport components, couplings, bearings, load cells, landing gear components, transmission shafts, jet engine components and helicopter drive shafts. Grade c250 uns k92890 ams 6512 wr. N 1.6359 bs s162 a maraging vascomax alloy steels containing 7.5% cobalt and 4.8% molybdenum. This steel is produced by vacuum arc remelting, and provides a high strength nominally 250 ksi tensile (1725 mpa) with an above average level of toughness. The alloy retains its strength up to 450oc and good notch impact is maintained down to minus 50oc and below. This material may be nitrided. C250 is usually supplied in the annealed condition where the microstructure consists of fine martensite before final heat treatment.

    ...more
    Get Best Price
  • Maraging Vascomax Alloy Steels

    Maraging Vascomax Alloy Steels

    2,999 Per Kilogram

    1 Kilogram (MOQ)

    We are offering chamunda industries is importer & stockiest of maraging steel vascomax alloy c 300 grade c300 uns k93120 ams 6514 wr. N 1.6358 a maraging vascomax alloy steels containing 9.0% cobalt and 4.8% molybdenum. This steel is produced by vacuum arc remelting, and provides a very high strength nominally 300 ksi tensile (2070 mpa) with an above average level of toughness. The alloy retains its strength up to 450oc and good notch impact is maintained down to minus 50oc and below. This material may be nitrided. C300 is usually supplied in the annealed condition where the microstructure consists of fine martensite before final heat treatment.

    Country of Origin : India

    Type : Maraging Steel

    Shape : Round

    Thickness : 0-25 Mm, 50-100 Mm

    ...more
    Get Best Price
  • Inconel 800 Circle

    Inconel 800 Circle

    Request for Price

    We are offering inconel® alloy 600 (uns n06600) circle available ready stock size :- 660 mm od x 65 mm thikness interest buyers contact us:.

    ...more
    Get Best Price
  • Flanges

    Flanges

    Request for Price

    01 Piece(s) (MOQ)

    We are instrumental in providing to our valuable customers excellent quality duplex flanges which are available with following specification:- standard: astm asme asa 182 grade: f 44, f 45, f51, f 53, f 55, f 60, f 61. Types: reducing flanges, blind flanges, plate flanges, screwed flanges, weld neck flanges, stainless steel flanges, slip on flanges, socket weld flanges, lap joint flanges size : 18" nb to 48"nb. Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #. Form slip on , socket weld , blind , lapped , screwed , weld neck , reducing , spectacle ,slip on boss , plate , plate blank , screwed boss standard : astm asme sb 61 62 151 152. Grade : uns no. C 92200, uns no. C 83600, uns no. 70600, 71500, c 70600 (cu -ni- 9010), c 71500 (cu -ni- 7030), uns no c 10100, c 10200, c 10300, c 10800, c 12000, c 12200 standard : astm asme asa 182 grade : f5, f9, f11, f12, f22, f91. Uns s31803 - uns s32205 clients can avail these duplex flanges at industry leading prices from us.

    Brand Name : CHAMUNDA

    Country of Origin : INDIAN

    ...more
    Get Best Price
  • Chromium Copper Round And Flat Bar

    Chromium Copper Round And Flat Bar

    685 Per Piece

    10 Kilogram (MOQ)

    Material : Chromium Copper

    Get Best Price
  • Brass Pipe Fittings

    Brass Pipe Fittings

    99 Per Piece

    10 Piece (MOQ)

    Connection Type : Male

    Size : 1/2 inch

    Material : Brass

    ...more
    Get Best Price
  • Non Ferrous Metal

    Non Ferrous Metal

    Request for Price

    Get Best Price
  • Pipe Fitting

    Pipe Fitting

    Request for Price

    We chamunda industries are one of the india's leading stockholder & manufacturer of following items in the form of pipe fitting, flange,fasteners , but-weld fitting , industrial valves ,sheet, plate, flat bar, pipe, tube, bar, rod, wire, strip, ring, forging, casting, nickel 200 uns n02200 nickel 200, nickel 99.2 nickel 201 uns n02201 nickel 201, lc nickel 99.2 astm b165, astm b725, astm b163, astm b127, astm b164, astm b564, astm b366, astm b865, astm b829, astm b775, astm b165, astm b730, astm b751, asme sb165, asme sb725, asme sb163, asme sb127, asme sb164, asme sb564, asme sb366, asme sb865, asme sb829, asme sb775, asme sb165, asme sb730, asme sb751, ams 4544 alloy 400 uns n04400 din 2.4360 alloy 400 bs 3076 na13, qq-n-281 class a, astm b164 monel 400®, nickelvac® 400, nicorros® 400 monel r405® uns n04405 monel k500® uns n05500 din 2.4375 alloy k-500 bs 3076 na18, qq-n-286, astm b865 astm b168, astm b443, astm b166, astm b446, astm b637, astm b167, astm b829, astm b517, astm b775, astm b444, astm b705, astm b163, astm b516, astm b751, astm b704, astm b366, astm b564 asme sb168, asme sb443, asme sb166, asme sb446, asme sb637, asme sb167, asme sb829, asme sb517, asme sb775, asme sb444, asme sb705, asme sb163, asme sb516, asme sb751, asme sb704, asme sb366, asme sb564, ams 5540, ams 5870, ams 5715, ams 5889, ams 5888, ams 5887, ams 5596, ams 5662, ams 5663, ams 5664, ams 5542, ams 5598, ams 5667, ams 5599, ams 5879, ams 5666 alloy 600 uns n06600 inconel 600®, nickelvac® 600, ferrochronin® 600 alloy 617 uns n06617 inconel 617®, nicrofer 5520® alloy 625 uns n06625 inconel 625®, chronin® 625, altemp® 625, haynes® 625, nickelvac® 625, nicrofer® 6020 alloy 718 uns n07718 inconel 718®, nicrofer® 5219, allvac® 718, haynes® 718, altemp® 718.

    ...more
    Get Best Price
  • Stainless Steel Sheet

    Stainless Steel Sheet

    Request for Price

    Get Best Price
  • Stainless Steel Pipes

    Stainless Steel Pipes

    Request for Price

    Get Best Price
  • Stainless Steel Products

    Stainless Steel Products

    Request for Price

    Get Best Price
  • Stainless Steel Tubes

    Stainless Steel Tubes

    Request for Price

    Get Best Price
  • Stainless Steel Flanges

    Stainless Steel Flanges

    Request for Price

    Get Best Price
  • Stainless Steel Forged Fitting

    Stainless Steel Forged Fitting

    Request for Price

    Get Best Price
  • Stainless Steel Plates

    Stainless Steel Plates

    Request for Price

    Get Best Price
  • Stainless Steel Rods

    Stainless Steel Rods

    Request for Price

    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Manufacturers
  • Secondary Business Type Exporters / Wholesale Suppliers
  • Year of Establishment 1989
  • No. of Employees Below 20
  • Annual Turnover Rs. 0.5 to 2.5 Crore Approx.
  • Ownership Type Individual (Sole proprietorship)
  • GSTIN Number 27CQNPS2138E1ZM

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
We are pleased to introduce ourselves as one of the leading Manufacturer , Stockiest , Exporter & Supplier of Stainless Steel Carbon Steel Alloy Steel Ferrous & Non Ferrous metal CHAMUNDA INDUSTRIES offers comprehensive and sophisticated supply solutions for all steel materials We offer piping materials made of Carbon steel, Alloy and Stainless Material Grades, special material grades such as Hastelloy, Inconel, Monel, Duplex, Copper-Nickel and others. Product Range Special Nickel Alloy Grades : Nickel 200/201 - B366 - UNS N02200/N02201 Alloy 400 - B366 - UNS N04400 - Monel® 400 Alloy 600 - B366- UNS N06600 - Inconel® 600 Alloy 625 - B366 - UNS N06625 - Inconel® 625 Alloy 800H/800HT - B366 - UNS N08810/N08811 Incoloy® 800H/HT Alloy 825 - B366 - UNS N08825 - Incoloy® 825 Alloy 276 - B366 - UNS N10276 - Hastelloy® C-276 Titanium Alloys B363 Gr 1 / 2 / 5 / 7 / 19 / 23 Titanium 6Al 2Sn 4Zr 6Mo Titanium 8Al 1Mo 1V Titanium 6Al 6V 2Sn Stainless Steel Nitronic 50® Maraging C250/Vascomax 250 Waspalloy Pipes, seamless and welded (ERW, HFI, EFW, LSAW & HSAW) Seamless: from ½” up to 24” ERW/HFI: from 4” up to 24” EFW, SAW: from 16” up to 250” (as used for offshore structures) Linepipes as per API 5L, 5LC (CRA lined pipe), 5LD (clad linepipe) including high yield linepipes for sour/non sour applications, onshore and offshore applications. Bends manufactured from seamless and welded pipes. Process Pipes to ASTM, DIN,EN, typical materials are all CRA grades, including Duplex, Super Duplex and Lean Duplex, low and high alloyed Carbon steel grades Heat exchanger tubes to EN, ASTM, made of Aluminum, Copper, Copper-Alloys, Nickel, Nickel-Alloys, Titanium, all typical CRA and Carbon steel grades Buttweld Fittings: Elbows, Reducers, Tees, Caps, Laterals and special fittings such as Crosses, Barred and Split Tees, Headers, Manifolds, Saddles, etc. in accordance with ANSI/ASME B16.9/B16.28, MSS-SP, DIN, AFNOR, CSA, GOST, NACE, etc. Typical Material Grades: WPB, WPC, WPL6, WPHY42 to WPHY70, WP11, WP22, WP5, WP9, WP91, WP92, WP304, WP321, WP347, WP316, S31803, S32760, N06625, N08825, CUNI, WPT2, WPT12 etc. Forged Fittings: Elbows, Tees, Reducers, Caps, Couplings, Unions, OUlets, Nipples, Bushings, Crosses, Plugs, etc to ANSI/ASME, BS, MSS, NACE, etc. Typical Material Grades: A105, LF2, F304, F316, F11, F22, F5, F9, F52, F60, F51 etc. Flanges: WN-, SW- and Blind Flanges, Slip-On Flanges, Spectacles, to ASME, MSS for FF (flat face), RF (raised face) or RTJ (ring joint) facings, all pressure ratings Orifices: Orifice Flanges, Spacers & Blinds in accordance with customer provided drawings. Bolts: Stud bolts and Machine Bolts with Nuts and Washers. Gaskets: Rubber and PTFE Gaskets, Spiral Wound Gaskets, RTJ Gaskets, Insulating Kits. Valves: Gate-, Globe-, Ball-, Butterfly- and Check Valves. Plug-, Angle-, Safety- and Control Valves. Wellhead equipment Valves used for applications in refineries, petrochemical plants, power generation, E&P, Mining, Marine, LNG & LPG projects Valves manufactured from cast & forged steel or cast iron All pressure ratings from 150 up to 4500 All kinds of end connections such as: flanged, BWE, RTJ, socket weld, threaded etc. All trims can be supplied In accordance with the following standards: API 600, 602, 603, 608, 609, 598, 6A, 6D, ANSI/ASME, MSS-SP, BS, DIN, GOST, NACE, etc. Services: high pressure and temperature service, low temperature and cryogenic service Bolted, bellow, welded or pressure seal bonnet and FE execution Full port, regular and reduced port Metal or soft seated Carbon, stainless, alloy & duplex material.
Read More »

Contact Information

Chamunda Industries

  • DILIP SHETH
  • Shop No 7 ,Marker Building ,1st Panjrapole Lane ,Mumbai:400004, Bhuleshwar, Maharashtra
top