Chemical Plant Dealers in Mumbai

• Capacity: 0-250 Litres Per Hour
• Voltage: 380 V
• Type: Automatic
• Usage/Application: Water Filtration
• Filter Type: Activated Carbon Filters
• Brand Name: V.J. Water
• Body Material: MS

Being efficient in terms of performance, these water treatment plants are also made to undergo extensive checks on different defined parameters so as to ensure these deliver optimum functional support at client's end. Some of the areas where these are used in include for basic water filtration in residential, industrial and commercial areas, food processing industry, the pharmaceutical industry and others. These plants are recognized for providing superior purification of water as demanded by the customers.

• Brand Name: ACE
• Voltage: 440 Volt
• Capacity: 1000 Liter / 1200 Kg per batch
• Usage/Application: Chemical Industries
• Resistant to: Corrosion
• Size: 16 - 72 Inch
• Body Material: SS
• Power Source: Electric
• Phase: Three Phase
• Frequency: 50 Hz

The process of purifying CO2 is obtained from burning of fuel, using MEA (Monoethanolamin) in a aqueous solution which has been known for quite some time. The plant uses a modernized process by which high purity and food quality CO2 can be obtained. The plant has the latest automatic control equipment and is easy to operate and requires very little maintenance. The CO2 containing combusion gases passes through a pre-cleaning stage and is brought into contact with an aqueous MEA solution which absorbs CO2. Afterwards, the CO2 gas is desorbed from this solution and compressed to the required pressure using special compressors. This is followed by cleaning, drying and final cleaning stages of CO2 gas which is then liquified and filled in a storage tank.

TQMC Machinery is professional manufacturer of calcite Crusher and Calcite Grinder Mill. It supplies all kinds calcite crusher equipment and design calcite crushing & grinding production line according to the requirements of customers. Our calcite Crusher have exported to South Africa, Kenya, USA, Australia, Zimbabwe, Russia, etc. Calcite processing equipment TQMC calcite pulverizers include calcite crushers and calcite grinding mills. calcite crushers includes Jaw Crusher, Cone Crusher, Impact Crusher and Mobile Crushing Plant, which is used to crush the big calcite block to smaller. TQMC grinding mills include Ball Mill, Raymond Mill, MTM Trapezium Mill, Super-Micro Powder Mill and Coarse Powder Grinding Mill, which is used to grind the crushed calcite block to fine powder. You can choose suitable calcite pulverizers depends on your calcite size, hardness, capacity and your cost budget. Calcite processing flow Raw calcite first enter calcite crushing plant to be crushed to smaller size. The calcite crushing plant consists of jaw crusher, cone crusher, impact crusher, belt conveyor, vibrating screen and vibrating feeder. Then they are lifted to storage room by elevator. Vibrating feeder will feed materials into calcite grinding mill evenly and gradually. After being grinded, the calcite powder will be blowed to cyclone by blower. Then the calcite powder will be transferred to storage room through pipes, and then will be discharged as final products. Sometimes the crushing process is not necessary, sometimes grinding process is not necessary.

• Type: Automatic
• Application: Industrial
• Voltage: 220 V
• Finishing: Polished
• Power Source: Electric
• Phase: Single Phase
• Warranty: 1 Year

• Voltage: 220-440V
• Frequency: 60 Hz
• Power: 5-10 Kw
• Automatic Grade: Semi-Automatic
• Driven Type: Electric
• Features: Longer shelf life
• Minimum Order Quantity: As per Client Requirement

In order to meet requirements of mineral processing units, we bring forth highly efficient Mineral Processing Plant. The Mineral Processing Plant comprises high-end equipment and device that efficiently separate ores and other impurities from minerals. Moreover, we provide installation services for Mineral Processing Plant as well. Highlights : Efficiently separate ores and other impurities from minerals Assembled using high quality components Efficient performance Robust structure

• Certification: ISO 9001:2008
• Application: Industrial
• Warranty: 1year
• Type: Bromine Recovery Plant
• Weight: 10000-15000kg
• Country of Origin: India

we are reckoned as reputed manufacturer, exporeter and supplier of bromine recovery plant in mumbai, maharashtra. our plant is known for its high effeciency and excellent performance. our recovery plant is manufactured using premium grade glass that ensures the best quality. the recovery plant is available with varied technical specifications to meet the varied requirements of buyers. our plant is corrosion and abrassion resistant. features : bromine recovery plant are available in 1 tpd / 2 tpd / 3 tpd etc. capacities. brief about product : bromine are being a highly reactive material, finds wide applications in many chemical industries like : organic intermediates, dyestuffs, agrochemicals, fire retardents etc.

• grey: blue

We are offering pva plant, pva plant offered are used for getting end product that comprises solvent free binders finding application in preparation of paint, coating. Manufactured through polymerization process where monomers are dispersed in aqueous phase getting uniform and stable emulsion. All specification and requirement are taken into consideration and well implemented during design and development. We work on parameter like dimensional accuracy, shapes, size and we end up satisfying clients to fullest. We offer our customer highly qualitative and extremely robust, economical and highly effective pva resin plant. We offer pva plant as per industry specification. Aries engineer provides different grades of pva plant that are designed efficiently and error free service.

• Dimensions (m): 1.50 x 1.25 x 1.25

We provide services for various kinds of yellow Zinc Plating like yellow and white that is attractive, protective and covers all new bolts, brackets to give a refinished and long lasting plating protection. It prevents oxidation of the metal by forming a barrier when metal is exposed to air thus also proving to be corrosion resistant. Designed for Rapid and Efficient Handling of small articles like Rivets, Screws, Nuts, Nails, etc.

The design of a glamptech continuous bleaching plant is based on the most advanced and easy to operate technology, which enables the reduction in consumption of bleaching chemicals, floor area and labour. It is also yields a final oil colour fully meeting the market standards. Glamptech continuous bleaching plant is of versatile design and can be used for bleaching of conventional refined oils as well as pre-treated oils to be refined by the physical refining process. The bleaching operation of the oil is earned out completely out of contact with air. The slurry preparation and bleaching are under vacuum where as the filtration is carried out in pressure leaf filters. This eliminates any possibility of oxidation of oils during the bleaching process and ensures production of high quality bleached oil.

A low carbon grade of nickel free from the stress- corrosion cracking associated with graphitisation in chemical plant operating at temperatures above 300ºC, e.g. caustic soda plant.

We offer complete Bitumen Emulsion Manufacturing Plant MS.RS and SS grade of emulsions as per Is 8887 on turnkey basis along with erection & commissioning. Our dedicated team of engineers works closely with our customers to ensure that the entire process of setting up the Bitumen Plant is made uncomplicated. Apart from training your chemists we also provide technical and commercial support for a period of 12 months from date of commissioning the plant. Capacity Offered 5MT/batch TO 25MT/batch size plant Uses Building of roads, runways and platformsWater proofing Mastic floorings for factories and godownsCanal coating which stops erosionDump-proofingTank baseJoint filling material Features Long lastingEasy to install and operateCustomized as per requirements

The refining process is of a chemical type and is made by means of a specific and rigorous procedure that uses chemical reagents basic low-polluting impact. The cylindrical reactor with stirrer is suitably designed to allow perfect homogenization during the conduct of the process and ensure a complete reaction. The filtration system is very versatile and allows to reduce the neutralization time. The range of chemical refining plants is very wide and allows to treat quantity 'of silver up to 500 kg per batch. The production time may 'vary from a few minutes up to 3-4 hours for large systems, where it is required high purity silver. The described plant can undergo customizations on the customer's request, photos posted are just one example of the many possible system solutions. Based on the needs of the customer it is possible to create tailor-made systems, with suitable characteristics to the machining process required.

We manufacture multipurpose PVA Emulsion Plant Which is widely use for making Paper Adhesive, Wood Glue, Envelop Adhesive, Wallpaper Adhesive Bookmark & Price label Adhesive etc.

We provide TOTAL TECHNICAL KNOWHOW , Training of Manpower for Operations and APPLICATION TECHNIQUES for the above. CATIONIC BITUMEN EMULSION PLANT (FIXED OR MOBILE) The cationic Bitumen Emulsion finds application on Roads to carry out,We Provide the Total Plant on TURNKEY BASIS to make Bitumen Emulsion used for various application in the construction of Roads.

Bed limiters are safety devices that are available for both random as well structured packing to avoid the expansion of the packed bed, as well as to maintain the bed top surface level.

Single Super Phosphate is a highly demanded chemical fertiliser with phosphorus as its main constituent. It is a rich source of many micro nutrients like Calcium, Magnesium, Iron, Aluminium, Sulphur and Gypsum.It is the only phosphatic fertiliser which can utilise Indian rock phosphate deposits.The powder form of SSP is known as PSSP. The free phosphoric acid present in the SSP is extremely beneficial for alkaline soils. Single Super Phosphate (SSP) was the first commercial mineral fertiliser and it brought the growth and development of the contemporary plant nutrient industry. Single Super Phosphate was one the widely used fertiliser; However Single Super Phosphate (SSP) was substituted by other Phosphorus fertilisers because of its comparatively low Phosphorus content.

• Purity (as H2SO4): 98.0% min
• Residue on ignition: 0.20% max

Catalyst and dehydrating agent in many organic chemical manufacturing and petrochemical processes, In the manufacturing of detergents, In the manufacturing of titanium dioxide (a widely used white pigment), and other dyes and pigments, In the manufacturing of fertilizers mainly phosphates but also zinc, ammonium and potassium sulphates, In the manufacturing process for a range of plastics, Metal processing such as picking and de-scaling of steel, and non-ferrous metal plating and purification.

• Features: Light Weight, Easy to Handle, Easy Maintenace

Emulsion is the core element of any water based paint. All paints are combinations of pigments (colorant) emulsions and water. Along with three ingredients – several additives are used in small quantities. The additives perform several key functions. The additives are generally wetting agents, helping in dispersion, anti settling agent, body agent, flow and leveling additives, driers, gloss improvers and many others. Whenever we manufacture emulsion we are involved in a long process of 9 to 10 hrs where a DM DI (Deminerlised) water about 50% and remaining raw material Vinyl – acetate monomer about 35 to 40 % and other chemicals such as catalyst, initiators, surfactants, wetting agent are added. The reaction temperature is about 75 to 80°. As this process is exothermic a small initial heating will helps in enhancing reaction and completion of process, in intermediate sample testing and the controlling the temperature within desired limit is essential to get excellent product.

POLY PLAST manufactures Process Reaction Vessels of different sizes and shapes as per the customer's specifications, ranging from 200 ltrs, to 1, 00,000 Itrs capacity with conical, dished or flat bottom and top. The M. O. C depends on chemical, temperature and pressure conditions of the process requirement. We also supply these equipments with complete stirring assembly with Independent mounting structure and suitable sealing arrangements as per the customer's requirements. Stirrers are fabricated out of MSSS materials, lined with plastic materials as per service warranted and tested with H.V.H.F spark testers for leak proof functioning. All thermoplastic liner weld joints are provided with non metallic conductive materials to facilitate spark testing. Similarly FRP lined metallic vessels are also tested with spark testing for pin hole or discontinuity of lining. These vessels are ideal replacement to the conventional MS glass - lined and Nobel metal claded vessels.

FRIGMAIRES OFFERS COMPLETE PLANTS ON A TURN KEY BASIS FOR THE PRODUCTION OF MODIFIED BITUMENS SUCH AS EMULSIONS.CUT BACKS.BLOWN BITUMEN.MEMBRANES AND COATINGS. THE SERVICES OFFERED BY US INCLUDES PLANT DESIGN.DETAILED ENGINEERING SERVICES,TANK FARM DESIGN,EQUIPMENT MANUFACTURE AND SUPPLY,ERRECTION AND COMMISIONING.LAB SET UP.TRAINING .FORMULATIONS.RAW MATERIAL SOURCING AND SUPPLY.PLANTS ARE TAILOR MADE TO MEET THE PROJECT COST AND LOCAL MARKET CONDITIONS. PRODUCT RANGE FOR WHICH WE OFFER PLANT AND TECHNOLOGY :

The oldest division of Dalal is the Chemicals Division. The products in the Chemical Division range from Rotary Vacuum Dryers to Wiped Film Evaporators. This ability to carry out two, sometimes three unit operations makes the SUPERTOR extremely versatile and useful. It sizes, reduces, grinds, delumps, chops, disperses, separates, macerates and even pumps and has been installed for various slurry handling applications viz. The SUPERTOR is an all-round machine developed from a centrifugal pump with an inclined disc which is at an angle to the shaft instead of a normal impeller. This creates strong turbulent flows which simultaneously aid in pumping and intense mixing of the medium. Since the rotor and the housing are equipped with teeth, the SUPERTOR can also be used for disintegration or crushing.

We are offering labsa plant. A continuous process, skid-mounted plant consisting of day tanks, storage tanks, flow control and proportioning arrangement, sulphonation with a dominant bath technology, complete with built-in heat removal and mixing arrangement. The plant also contains ageing, dilution and separation sections for stratification of the product and byproduct spent acid.