Back Back
Wind Tensioners
Tensioners have quality designed in with standard features that enhance durability and efficiency to get jobs done faster and safer. Quality Means Lower Life-Cycle Costs: Achieves 90% proof load requirement for ISO 898 Grade 10.9 bolts Fully enclose load cell eliminates debris in piston retraction mechanism Auto-engaging geared nut rotator Self-energizing, long life seals Enhanced Usability: Piston Stroke Indicator High pressure swivel coupling (optional on WSS & WSL) 1350 Bar maximum operating pressure Automatic piston retraction mechanism Designed with Safety in Mind: Overstroke prevention for safe operation WDD Series Robust gear drive Auto-engaging Geared Nut Rotator Small Diameter, high load 2-Stage hydraulic load cell Fast application using 1/2" drive Cycle counter (optional) WSD Series Robust Gear Drive Auto-engaging Geared Nut Rotator Low Height hydraulic load cell Fast application using 1/2" drive Cycle counter (optional) WSS & WSL Series Suitable for ISO Metric threaded, and All-Thread bars. Geared or Manual Nut Rotator Long & Short Stroke models Anti-slip grip surface High pressure swivel coupling (optional)
...more
Universal Pump Cart
Mobilize your hydraulic pumps with the PC200. The rugged tubular frame can easily handle pumps weighing up to 200 lbs. With 12" wheels, the cart rolls easily. Just load the pump onto the cart and wheel it right to the job. The universal mounting hole pattern lets you handle a wide variety of Power Team pumps. Used on these pumps:PA60, PA64 and PA554 air/hydraulic pumps; PE55 series, PE183-2 and PE184-2 electric/hydraulic pumps; PE21, PQ60 and PQ120 series “Quiet” pumps; PG55 series gas engine/hydraulic pumps; and pumps with optional 5 and 10-gallon reservoirs; Nos. RP50, RP51, RP101 and RP103.
...more
Universal Pullers
Enforcer 100 Series Adjustable jaws mean they always pull on a flat surface. Retaining chain holds jaws in place during positioning. Grip-O-Matic® feature means jaws grip progressively tighter as more pulling force is applied. 100 ton hydraulic cylinder is single-acting, spring return type with a maximum working pressure of 10,000 psi. Lifting bracket allows puller to be lifted if the workpiece center is more than 36" off the floor. Adjusting screw allows operator to move vertical position of the puller. Spring loaded feature means Enforcer 100 will align itself on uneven pulls. Hydraulic pump is a 2-stage, high pressure unit controlled by remote hand switch with 25 foot cord. Tow bar provides puller with plenty of mobility. Pushing adapters have a diameter of 4 1/8" and 2 1/2".
...more
twhc high cycle torque wrench
Wind Energy Torque Wrench Designed for high cycle life: 2 to 3x more than existing technology Increased reliability: simple drive assembly means less downtime Corrosion resistant material used for use in harsh environments Compact nose radius allows the tool to fit in tighter, hard-to-reach spaces Low weight, high strength design Fast operation, long stroke and optimum flow Multi-direction high flow swivel manifold Fully enclosed drive mechanism for operator safety No-pinch square drive direction switching
...more
Trabon MD Divider Valve
Available with 2, 3, 4, or 6 outlets Easy to install on new or existing equipment Use our cycle indicator pin models to provide positive assurance of a successful lube event Fluoroelastomer seals for high temperature applications or synthetic lubricants
Material : Steel
...more
Trabon DC Timer Controllers
Solid-state technology, combined with multiple-level protection, ensures dependable performance. Components are coated to protect them against moisture and meld them more solidly into a single unit that resists vibration. Easy interval selection “tunes” the on-board lubrication system’s output to meet changing environmental conditions. Memory capability assures lube protection The manual run button facilitates start-ups, filling or purging lines and lube points, as well as testing for integrity of the lube distribution lines. Very simple to install, the DC Timer requires just four mounting screws and connection of five wires
...more
TORQUE WRENCH PUMP
230,000 Per Piece
8 Piece (MOQ)
Weight : 22.46 Kg
Voltage : 115 V
Top Side Tensioner
SPRING RETURN BOLT TENSIONER Unique quick release bridge adaptation Piston overstroke prevention Piston stroke indication Compatible with MRT Tensioner range Piston/ cylinder misalignment compensation Bolt coverage from 1” to 3 ½” with just 4 tools Designed to fit BS1560 / ANSI B16.5 / API flanges Fully enclosed load cell design eliminates entry of debris into piston retraction mechanism The Spring Return design dramatically increases productivity and safety on the job site when compared to older technology manual return tensioners. Order a load cell and an adaptor kit to make a complete tensioner. Each are sold separately.
...more
Tire Removing Tool
TIRE REMOVING TOOL Made to fit into the pry bar pocket Hydraulic pressure does all the unseating. Lightweight and portable. P55 hydraulic hand pump and 9764 hose recommended to be used with BB1600.
...more
Tilter Load Rotors
Whenever you have big, heavy components to move or position, nothing helps you get the job done easier and faster than the 6,000 lb. “Tilter.” For lifting or positioning components, Power Team’s heavy duty lifting slings are just right. The heavy-duty Load-Rotors®, when used with a crane or hoist, greatly reduce time and effort. A self-locking worm and gear set in the Load-Rotor® head permits rapid angle adjustment of the component being handled. * Note: Not to be used for overhead lifting.
...more
Thrif-T Luber Metering Device
Full range of metering amounts for lubricating almost any machine Available in three types and ten flow ranges to meet lube requirements Quality sintered bronze filters won’t shred or clog like felt filters
...more
Thread Chasers tool
Restore damaged threads on shafts, housings, cages, etc., for re-assembly of matching parts. Eliminates need for thread-cutting equipment. Will not harm threads. V-pads and dies can be replaced. Cap. 1 1/4" to 5" O.D.
...more
Tensioner Pump
1500 BAR Electric pump Light weight (45.5 LBS/ 20.6 KG without oil) and compact for portability and working in small spaces. Low Current draw allows for remote location use Heavy duty drive train provides durability for rapid and repetitive cycling applications. Quality Means Lower Life-Cycle Costs: Over 100,000 cycles Continuous Duty (even at 50deg. C/ 122 deg.F ambient) Proven design: proven reliability Enhanced Usability: Light weight and portable: 45.5lbs/20.6kg (without oil) Removable Control Pendant (15ft/5m) cord length Removable 4" Calibration capable gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Maximum Oil Capacity: (vented reservoir) 1.0 Gallons / 3.8 L (to fill line) 0.9 Gallons / 3.4 L (useable) Operating Environment:Temperature: -13°F to 122°F / -25°C to +50°C (If temperatures are at extremes of the operating range, it is recommended to use hydraulic oils that are rated for those temperatures. Refer to service manuals and cooling options) Sound Level:82 – 86 dB A Pressure:0 – 21,750 psi (0 – 1500 bar) Typical Flow:168 cu-in/min – 8 cu-in/min 2.7 L/min – 0.13 L/min Power:0.5 HP Universal Motor (115 volt – 50/60 Hz) 11 amps (230 volt – 50/60 Hz) 5.5 amps
...more
Telescopic Boom Lifts
1,500,000 - 9,000,000 Per PER UNIT
Optional Configuration Optional: (All “option” configure will be charged per quotation) Description Specification Platform Size (L*W*H) 1.83*0.76*1.1M (6ft *2.5ft *3.6ft) Engine Perkins 1104D Tire Foam Operator protection Anti-crash device
...more
Telescopic Boom Lift
Type : Boom Lifts
Application : Disaster Use
Color : Blue, Brown, Grey, Light White, Off-White, Red, White
Condition : New, Used
Automatic Grade : Manual, Semi Automatic
Power : 0-3Hp, 3-6Hp, 6-9Hp, 9-12Hp
Driven Type : Hydraulic, Mechanical
Warranty : 1yrs, 2yrs
Loading Capacity : 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
...more
Swivel Caps
subsea tensioner
QUICK REACTION SUBSEA TENSIONOur Subsea bolt tensioner incorporating the quick reaction nut feature reduces diver fatique, improving diver safety and productivity. Visible piston stroke indication Piston/cylinder misalignment compensation Anti-slip cylinder surface for improved handling Low friction seals Anti-corrosion coating Bolt coverage from 3/4" to 3 1/2" Designed to fit BS1560/ANSI B16.5/ API flanges, as well as most compact flange designs
...more
Subplates Pump Accessories
For remote mounting of control valves. Subplates convert pump mounted valves to remote mounted valves quickly and easily. When fitted between pump cover plate valve mounting flange and control valve, provides a separate 3/8" NPTF female port, open to “return” regardless of position of valve. Also provides a separate 3/8" NPTF female pressure port. This subplate can be useful when you desire to use one pump with a deckmounted control valve, plus a separate remote-mounted valve to control another function.
...more
stressing jack
Stressing jack Ideally suited for work on slab-on-grade where dirt, heat and high volume use take their toll. Available in single or double-acting models. Standard single-acting units have a 10" stroke. Other stroke lengths are available on special order. Service repair is simple; components are long lasting and easily replaced. 3" detachable seater nose assembly easily replaced with optional 6" nose assembly. The jack of choice for highrise and elevated work, thanks to fast return time and light weight.
...more
Step Plate Adapter Sets
Power Team step plate adapters are necessary for pulling and installing bearings, gears, or other parts on hollow shafts or housings. Puller screw forces against step plate adapter, as shown at right. May be used with Power Team jaw-type pullers, Push-Pullers® and shop presses. CAUTION: All the items shown may not withstand the full tonnage of the pullers they may be used with.
...more
Standard Couplers
CYLINDER AND HOSE COUPLERS Designed for use up to 10,000 psi with hydraulic jacks, cylinders, etc. They are the threaded union type for interchanging cylinders in seconds. Each half is valved with a precision ball for a tight shutoff when disconnected. These couplers also permit the separation of cylinders or hose from pump when at 0 psi with minimal oil loss. NO-SPILL, PUSH-TO-CONNECT HYDRAULIC HOSE COUPLERS Designed to permit high oil flow, the no-spill, push-to-connect couplers with locking collar and flush face design are for high pressure applications. The flush-face concept makes it easy to clean both coupler ends before connecting. Our unique push-to-connect, “dry-break” design eliminates oil spillage. The locking collar makes accidental disconnects a thing of the past. For 10,000 psi operation. HYDRAULIC COUPLER DUST CAP Dust cap fits either male or female half couplers.
...more
Standard Bottle Jack
INDUSTRIAL LIFTING AND PUSHING APPLICATIONS. Choose from this complete line of premium quality, standard bottle jacks. Ideal for use in any number of industrial lifting and pushing applications. The 9110B, 9015B, 9022B and 9033B feature a beveled base which allows the jack to “follow” the load, reducing the chance of dangerous side-loading. Many jacks feature screw extensions Some jacks can be used in the vertical, angled or horizontal positions. Serrated or contoured saddles help stabilize the load for a safer lift. All jacks meet ASME B30.1 standards and carry the Power Team Marathon Lifetime Warranty. 110-ton jack features dual pumps for time-saving two-speed operation.
...more
Square Drive Torque Wrench
SQUARE DRIVE TORQUE WRENCHES The TWSD Series Square Drive Torque Wrenches are designed with the following: Low Weight, High Strength Design Superior Torsional Strength Fast Operation Cycle Fine Tooth Pawl Floating Piston Design Internal Swivel Manifold Relief Rigid Steel Body Construction Compact Frame Size Push Button Reversal of Square Drive Corrosion Resistant Finish 360° Reaction Arm Push to Click Reaction Arms Multi-Axis High Flow Swivel Manifold Simple Design Consistent Torque Output Fully Enclosed Drive Mechanism Accurate Torque Output Marathon Lifetime Warranty
...more
Spreader Bolting tools
• Use to lift machines or as a clamp; spread concrete forms or rebar or preform straightening jobs. • Conforms to ASME B30.1 standard. • High strength alloy steel forged upper and lower jaws on HS2000. Jaws are spring return; retract automatically when pressure is released. No. HS2000- 1ton capacity spreader. Full 2,000 lbs. capacity at 10,000 psi with 4" spread. Can be "dead-ended" at 4" spread under full load. Needs only 9/16" clearance to engage jaws. No. HS3000- 1 1/2 ton capacity spreader. Full 3,000 lb. capacity at 10,000 psi with 11 1/2 spread. Greater than competitive units. Needs only 1 1/4" clearance to engage jaws. Can be "dead-ended" at 11 1/2" spread at full load. Tested to conform to ASME B30.1 standard
...more
Air Operated Diaphragm Pump
Brand Name : SAMOA
Material : NA
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from Chindalia Industrial Products Limited
Post Free Ad