Circuit Board Dealers in Mumbai

• Size: 2 Inch, 3 Inch
• Material: ABS, PVC
• Max. Current: 110 V DC
• Current Rating: 16A
• Warrantey: 1Year
• Input connection: 3 wires of 0.5 sq.mm with customer specified length

• Brand Name: Kristeel
• Material: SS
• Country of Origin: Made in India
• Thickness: 0.35-1 mm
• Application: Commercial
• Design: Customized
• Finish: Polished
• Pack Type: Box

• Brand Name: Prototype PCB
• Base Material: FR4
• Board Thickness: 1.60 MM
• Copper Thickness: 35 MICRON
• Min. Line Width: 6-8 MIL

Prototype PCB in Three days at nominal rate. Rs 3500 including all. MOQ 10 nos.

• Weight: 200 ml, 500 ml
• Packaging Type: Bottle
• Color: White
• Usage/Applications: PCB Cleaning
• Item Weight: 210 g

A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper sheets laminated onto a non-conductive substrate. Alternative names are printed wiring board (PWB), and etched wiring board. We manufacture an exclusive gamut of Single Sided Printed Circuit Boards are available in various thickness and track widths. We manufacture Single Sided Printed Circuit boards that sizes from 0.4mm to 3.2 mm thickness with the thickness of the copper 18-35-70 micron as per requirement. These Single Sided Printed Circuit Boards are widely used in various electronics applications. Being Single Sided Circuit Board, it connect various electronic components electrically. We can provide customization to our range of Single Sided Printed Circuit Boards. Available In Thickness Ranging From 0.4mm to 3.2mm Thickness Of Copper 18-35-70 micron

We are a prominent Manufacturer of superior quality PCB Card Guides which are designed with standard 19� Rack Systems. There are 4 Types of Card Guides CG-3, CG-4, CG-11 & CG-11. The molded fingers of PCB Card Guides act as pressure pad to withstand vibrations and are ideally suited for Air borne, Submarine and industrial electronics equipment. The snap fixing facility needs no mounting hardware or tool. They are available in two different materials ABS & Polycarbonet. CG-3 big in size, CG-4 small in size. Types of PCB Card Guides Available CG-3 CG-4 CG-11

• Shelf Life: 24 Months from Date of Manufacture in Sealed Condition.
• Packaging: 400 Ml Aerosol Spray - 550 Ml Aerosol Spray

High Gloss Fast Drying Flexible Acrylic Conformal CoatingELECTOCOAT is a fast air-drying, lightweight, clear, tough and flexible acrylic coating designed primarily to protect printed circuit boards and electrical / electronic equipment against high voltage arcing, corona shorts, corrosion, ingress of moisture and fungus. It resists rust, tarnish, corrosion, moisture and has excellent waterproofing / weatherproofing abilities. ELECTOCOAT is highly abrasion & scratch resistant and protects electronic equipment completely due to its high dielectric strength. It does not contain any harmful chlorinated solvents, CFCs or ozone depleting chemicals.Benefits Protects against rust, corrosion, tarnish, oxidation, moisture and weathering influences Provides a high-gloss, clear protective finish that remains transparent and does not fade or become yellow Provides a protective and insulating film that shields printed circuit boards from electrical leakage and short circuits Prevents sparking and corona discharges Non-conductive and has good dielectric properties Excellent resistance to weak acids & alkalis, water, oils and chemical fumes Easily solderable and very convenient for onsite repair jobs Conforms to requirements of specifications MIL-I-46058C Applications Insulation and protection of all electrical, electronic and high- tech equipment of: general electronics, printed circuit boards, thick film circuits, high voltage transformers, electrical motor coils, cables, wires; for moisture proofing and corrosion prevention of any industrial, automotive, aviation, marine and military electrical & electronic hardware.Directions For Use - Bulk Mask and protect areas not to be coated. Apply steady even strokes by means of brush. Component to be coated can also be dipped into the coating. For best results, two light coats are better than one heavy coat. Coating becomes dry to touch in about 15-20 minutes. Complete cure takes place in about 24 hours depending upon the relative humidity.Directions For Use - Aerosol Shake can vigorously for at least one minute after bearing noise from inside the can is audible. Mask and protect areas not to be coated. Hold can 12-15 inches away from surface to be coated and spray in steady, even strokes. For best results, two light coats are better than one heavy coat. Coating becomes dry to touch in about 15-20 minutes. Complete cure takes place in about 24 hours depending upon the relative humidity. Clean the valve by inverting the can and spraying a few short bursts till only the clear propellant comes out. Clean the actuator button orifice by means of a thin, fine wire.Caution:- Contains flammable propellant and solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

• Model: HV-EXP4294

Digital Electronic Circuit Trainer Bread Board Model Science Labs Hoverlabs is Manufacturer, Exporter Supplier of Digital Electronic Circuit Trainer Bread Board Model Technical Description Features : 1. Basic trainer for students to perform more than 15 basic experiment of operational amplifier. 2. Glass Epoxy PCB used as front panel of 300mmx220 mounted on light weight shock proof plastic cabinet. 3. On board power supplies, function generator Bread Board mounted. 4. Supplied with set of components connecting wire..

We are offering reliance electric bm ac technology circuit board. part# 0-60023-5 description reliance electric b/m ac technology card part type manufacturer reliance alt. Manufacturer system name-reliance electric system subtype additional information approx. Dimensions approx. Weight.

pcb spacers Brass Standoffs or Brass spacers have grown to be one of our most high-demand product ranges in the specialized high tech environment of printed circuit board manufacture. Spacers, in a variety of materials and types are essential pcb components within all kinds of circuitry products. In these we specialized.

• Number of Poles: 4 Pole
• Color: Black
• Voltage: 12V DC
• Features: Easy to install, Durable nature, User-friendly, Affordable price, Compact design
• Temperature Range: 20 to 50 Degree Celsius
• Current: 7A

• Frequency: 50Hz
• Board Thickness: 2.2 Mm
• Input: AC
• No. of Layers: 3
• Masking Color: Green
• Material: FRP
• Min Hole Size: 0.15 mm
• Current Type: AC

Relying on our up-to-date infrastructure, we are able to manufacture, export and supply Ultrasonic PCB Cleaner. It is widely used in various industries and laboratories for cleaning mixed emulsifier for highly efficient separation of water-based liquid molecular extraction. This cleaner is available in varies models and specifications as per clients application requirement. Our offered cleaner is manufactured in our technologically advanced manufacturing unit with the aid of advanced technology using quality-approved components under the supervision of our skilled professionals. This Ultrasonic PCB Cleaner can be availed at reasonable rates. Features: Easy maintenance Long functional life Trouble-free functionality Optimum performance Standard Size Ultrasonic Cleaners    

• Color: Red,Green,Blue.Black,Pink
• Packaging Type: Packets
• Shape: Round,Circular
• Materials: Stainless Steel,Mild Steel,Iron,Material,Rubber
• Finishing: Polished,Color Coated
• Usage: Industrial,Galvanized

• Thickness: 4 Mm
• Material: Plastic
• Weight: 108 G
• Shape: Rectangular
• Power: 40 Watt
• Board Type: Double sided
• Type Of Tension: AC
• Phase: Single Phase

• Type: Velcro
• Brand Name: Marvel
• Resistor: 1 megaohm
• Inner Layer: Soft Conductive Rubber

• Features: Low working voltage , Expansion shield , Comes with a connection switch.