Circuit Breaker Dealers in Dahisar, Mumbai

• Size: 2.5 Inch, 3.5 Inch
• Material: Metal
• Certification: CE Certified
• Application: Office, Residential
• Mechanical Life: 1 Year
• Current: 3VDC
• Current Range: 16A

We hold expertise in manufacturing and supplying Automatic Light Control Switch. We make available Automatic Light Control Switch that is used to make the advertising/hoarding lights on/off at the predetermined/set time. With the Automatic Light Control Switch, one can switch on and off the advertising lights number of times in a day at different timings, as per the customers requirement. Automatic Light Control Switch, that we offer, does not need man power, thus no chance of human error. The Automatic Light Control Switch saves a lot of electricity and is highly accurate. In case of power failure, Automatic Light Control Switch retains its memory values and setting does not change or required to set the timing again. Payback period is within six months.

• No.Of Poles: Single Pole
• Country of Origin: Made in India
• Breaking Capacity: 10 KA
• Voltage: 240 V
• Protected poles(PP): 1 PP
• Rated Short circuit capacity (Ampere): 10000 A

• Brand Name: Sayona
• Shape: Reactangle & Square
• Material: Stainless Steel
• Feature: Weatherproof
• Dimension: Customized
• Cable Entry: Top Entry & Bottom Entry

• Frequency: 50 Hz
• Voltage: 230 V
• Display Type: LED
• Model Name/Number: RCMS 460D
• Power Source: Electric

• Brand: SSE
• Rated current: 32 - 100 Ampere
• Voltage: 240 - 415 V
• Number Of Poles: 2
• Frequency: 50 Hz
• Sensitivity: 30,100 & 300 mA

Libratherm Instruments AC / DC Signal Convertor cum Isolator (Model : ISM-10) is designed in 35 mm. DIN Rail compatible modules. These modules accepts DC input signal of (4-20)mA, (0-20)mA, (0-50)mA, (1-5)V, (0-5)V or (0-10)V or from the Thermocouple or RTD Sensors or from the load cell, pH, ORP, conductivity sensors etc.. It also accepts AC variable voltage of (0-110 V)/(0- 230 V) or AC current of (0-5)A or (0-1) A from external CT and provides optically isolated output in the form of (4-20)mA or (0-5)V or (0-10)V. Both the input and output levels have their grounds optically / galvanically isolated. Thus the process signals received from the Transducers or transmitters or Sensors can be directly connected through ISM-10 to the PLC, DCS, SCADA etc.. without any ground line interference. The ZERO and SPAN presets are accessible to the user for on site calibration. These modules operates on 230 VAC / 110 VAC or 24VDC supply. The module with single input and multiple parallel outputs can also be provided to meet the control system requirement. These modules are rugged, reliable, field proven and economically priced.Applications :Interface low-level signals coming from the sensors or transducers from the plant to DCS, SCADA, PLC or PID process controllers without ground line interferences.

• Type: Automatic, Semi-Automatic, Manual, Analog
• Model: POW-3-ZC

Our Double Pole MCB is built to last long. We understand how important packaging is. Therefore, we make sure our products ate packed properly, have smudge-proof labels and are aesthetic to look to lure in more customers. Our company is well versed with online as well as traditional payment methods. As per requirements of patrons, we can sign an agreement for payment with suitable terms and conditions.

• Aerial Rod: Multiple Point

We are offering aerial rod, multiple point, terminal base. lightning rod a lightning rod as spelled in us and australia or lightning conductor in uk is a metal rod or metallic object mounted on top of a building, electrically bonded using a wire or electrical conductor to interface with ground earth through an electrode, engineered to protect the building in the event of lightning strike. If lightning targets the building it will preferentially strike the rod and be conducted to ground through the wire instead of passing through the building where it could start a fire or cause electrocution. a lightning rod is a single component in a lightning protection system. Lightning rods are also called air terminals or strike termination devices. The lighting rod requires a connection to earth to perform its protective function. Lightning rods come in many different forms, including hollow, solid, pointed, rounded, flat strips or even bristle brush-like: copper or aluminium. The main attribute of all lightning rods is they are conductive. lightning protection systems a lightning protection system is designed to protect a structure from damage due to lightning strikes by intercepting such strikes and safely passing their extremely high voltage currents to the ground earth. A lightning protection system includes a network of air terminals, bonding conductors, and ground electrodes which are designed to provide a low impedance path to ground for potential strikes. lightning protection systems are used to prevent or lessen damage to structures done by lightning strikes. It mitigates the fire hazard which lightning strikes pose to structures. A lightning protection system provides a low-impedance path for the lightning current to lessen the heating effect of current flowing through flammable structural materials. If lightning travels through porous and water-saturated materials,these parts of a building may literally explode if their water content is flashed to steam by heat produced from lightning current. because of the high energy and current levels associated with lightning ,currents can be in excess of 150,000 amps and the very rapid rise time of a lightning strike, no lightning protection system can guarantee absolute safety from lightning. Lightning current will divide to follow every conductive path to ground, and even the divided current can cause damage. Secondary "side-flashes" can be enough to ignite a fire, blow apart brick, stone, or concrete, or injure occupants within a structure or building. However, the benefits of basic lightning protection systems have been evident for well over a century. the parts of a lightning protection system are air terminals lightning rods or strike termination devices, bonding conductors, ground terminals also known as ‘’ground’ or "earthing" rods, plates, or mesh), and all of the connectors and supports to complete the system. The air terminals are typically arranged at or along the upper points of a roof structure, and are electrically bonded together by bonding conductors (called "down conductors" or "down leads"), which are connected by the most direct route to one or more grounding or earthing terminals. connections to the earth electrodes must not only have low resistance, but must have low self-inductance. An example of a structure vulnerable to lightning is a wooden barn. When lightning strikes the barn, the wooden structure and its contents, may be ignited by the heat generated by lightning current conducted through parts of the structure. A basic lightning protection system would provide a conductive path between an air terminal and earth, so that most of the lightning's current will follow the path of the lightning protection system, with substantially less current travelling through flammable materials. the majority of lightning protection systems in use today are of the traditional franklin design. The fundamental principle used in franklin-type lightning protections systems is to provide a sufficiently low impedance path for the lightning so that it travels through to reach ground without damaging the building. This is accomplished by surrounding the building in a kind of faraday cage. A system of lightning protection conductors and lightning rods are installed on the roof of the building to intercept any lightning before it strikes the building.

We are manufacturing and offering 11 kv g.o air break switch with triple pole. Each pole consists of galvanized steel base, h.t insulator & spring loaded contact. It has a section to break magnetizing current of transformer horizontal g.i. Pipe 01 adequate length of g.i pipes for operation from ground and operating handle complete in both on & off position. Technical specification: rated voltage : 12kv rated current : 400a frequency : 50hz impulse withstand voltage (+ve) : 77kvp impulses withstand voltage (-ve) : 76kvp also available in 1122kv air break switch.

• GREY: WHITE

We offer 6 way spike suppressor with individual switch available in 1.503.005.00 mtr.lenght in grey &white colour.

auto phase changer, electronic phase changer, Automatic phase changer

We manufacture these Changeovers using quality raw materials and in accordance with set industry standards.

• Material: ABS
• Certification: ISI Certified
• Application: Electricity Safety
• Color: Multicolor
• Max. Current: 110 V DC
• Mechanical Life: 1 Year
• Current Rating: 16A, 32A

auto phase changer, automatic rotary switch, preset potentiometer

Foot Switch, Push Buttons, bakelite, plastic connectors, Indicating Lamps

Electrical Switches, Electrical Wire, Electrical Wires

Electrical Switchgear, Electrical Control Panel

air break isolating switches, CCTV Camera, dropout fuses, Earthing Materials

Switchgear, Allied Products, DIN Mounting Rail, control panel accessories

Signal Isolator, electronic process control instrument

We are offering capacitor. Make: nichicon rubycon samwha philips keltron samsung types: electrolytic box type polyester type el-ci-ar mylar ceramic tantalum we also deal in smd: all size-120608050603040312102512 smd tantalum all case-abcd

Electric Switches, electric wires, Electric Cables, Electric Sockets

Switchgear, Cable Connectors, surface lights fitting, road lights

Switch Gear, Distribution Panel, Electric Cables, Electric Control Panel

sf6 circuit breakers

Switchgear

Main Switches, Cable Glands, Crimp Terminal, clips, Cable Terminals

Electric Switches, brass barrel, Electric Relays, Electric Sensors