Circular Knitting Machine Dealers in Mumbai

•  :  
• Cylinder Dia: 4/5/6 inch
• Needle: as per customer specifications/as per sample
• Lay Flattened Width: 1 INCH TO 28 INCH
• Feed: 1/2/3/4 Feed/Multi strand
• Wire Dia: 0. 011 inch / 0.27 mm to 0.006 inch / 0.15mm

We are the main supplier of this product.

The Machine is avialable in this sizes as under :8"x 2"x3000.

• Automatic Chip Conveyor: Air compressed oil mist
• Capacity: 8 - 50 mm
• Blade Motor: 10 HP
• Machine Weight with Table: Approx. 1900 kgs
• Machine Dimension: 1900 (W) x1500 (L) mm
• Hydraulic Pump Motor: 2 HP
• Blade Speed: 17 - 200 rpm
• Saw Blade Size: 250 x T 2.0 x 1.75 t mm (T kerf t thickness)
• Bar Feed: Servo motor and ball screw
• Blade Feed: Servo motor and ball screw
• Automatic Feed Length: Single feed 6 - 400 mm, Multiple feed - 3000 mm

• Weight: 1500KG
• Voltage: 415
• Model: MC-610AL CNC
• Capacity: 210MM X 300MM

• Model: Rishikesh Circular Wire Knitting Machines WKRO
• Cylinder Dia: 4/5/6 inch
• Needle: as per customer specifications/as per sample
• Lay Flattened Width: 1 INCH TO 28 INCH
• Feed: 1/2/3/4 Feed/Multi strand
• Wire Dia: 0. 011 inch / 0.27 mm to 0.006 inch / 0.15mm
• CE Certified:  

• Material: Cast Iron
• Finishing: Polished,Powder Coated
• Phase: Double Phase
• Usage: Industries
• Type: Plastic Circular Loom Machine

Pmw knitting machine in 16"17"18"19" dia . 24 gg machine. Running condition . Well maintained. With iro

• Weight: 90 kg
• Voltage: 220v/50hz
• Power: 40w

Our Circular Vibrators are fully made up of polyurethane and programmable according to application. It is very much suitable of Hollow, Linked Pieces, Thin Pieces, Large Pieces. This machine is designed to work continuously, almost negligible noise and does not harm or deform the work pieces.

Circular knitting or knitting in the round is a form of knitting that creates a seamless tube. When knitting circularly, the knitting is cast on and the circle of stitches is joined. Knitting is worked in rounds (the equivalent of rows in flat knitting) in a spiral. Originally, circular knitting was done using a set of four or five double-pointed needles. Later, circular needles were invented, which can also be used to knit in the round: the circular needle looks like two short knitting needles connected by a cable between them.Longer circular needles can be used to produce narrow tubes of knitting for socks, mittens, and other items using the Magic Loop technique. Machines also produce circular knitting; double bed machines can be set up to knit on the front bed in one direction then the back bed on the return, creating a knitted tube. Specialized knitting machines for sock-knitting use individual latch-hook needles to make each stitch in a round frame.Many types of sweaters are traditionally knit in the round. Planned openings (arm holes, necks, cardigan fronts) are temporarily knitted with extra stitches, reinforced if necessary. Then the extra stitches are cut to create the opening, and are stitched with a sewing machine to prevent unraveling. This technique is called steeking.

• Dia of saw blade 12': Arm Radial capacity 360°
• Depth of cut 2": Max. blade rotating angle 90°
• Size of wooden work table 30" x 36": Max. cross cut capacity 24"
• Height of work table 30" Blade RPM 2800: Power required HP / RPM 2 / 2800

Best quality Indian Make Ribsaw machine complete with electric motor 2HP 3 phase, 2800 RPM 12" circular saw with saw guard motor pulley, V belt push button starter having the following specification.  

Best quality Indian Make Ribsaw machine complete with electric motor 2HP 3 phase, 2800 RPM 12" circular saw with saw guard motor pulley, V belt push button starter having the following specification.  

• Frequency: 50 Hz
• Voltage: 440 V
• Phase: 3 - Phase
• Machine Type: Semi-Computerized
• Usage/Application: Industrial
• Age of the Machine: 3 Years
• Machine Gauges : 18 G

We are successfully meeting the varied requirements of our clients by providing the best quality range of Circular Knitting Machine.

• Circular Saw Machine 7: Orange
• 3496: 1

Details 1200W, 4900 rpm Circular Saw Virgin Plastic Material

Pelican’s I.D. Clamped Flange Facing Machine is a portable large diameter flange facer with a capacity to currently machine 1.5 metres to 12 metres flange diameter. The capacity can be altered to machine flanges from 1 metre to 28 metres in diameter. As this machine was predominantly designed and made to machine slew bearing support flanges of large diameters, like the ones in Bucket Wheel Excavators and other large slewing structures, its primary objective is to produce a flat circular surface. It has been able to achieve flatness accuracies as much as 0.06 mm (60 microns) on the entire flange diameter of 5 meters. Being equipped with a state of the art automation system and a host of high accuracy sensors enables it to deliver unmatched machining capabilities. The real time display of data of the machine performance and onboard computers help maintain the desired level of accuracy. The same sensors and computers prevent any untoward incidents by sounding alarms and also an auto stop function. Despite the fact this machine is used to machine large and very large diameter flanges, in order to be portable and easy to use, it is designed to be transported in parts and then assembled on site. This lets us machine any job at any location. The machine can be set true to the level of earth or to the level of the job to be machined. With appreciably higher material removal rates and being very easy to setup, the average total time taken from setup to finish machining is generally 30 hours or lesser.

• Capacity: 50 ml - 700 ml
• Model: GSR 700
• Motor: 1/2 HP
• Output: 60 / 65 per minute
• Net Weight: 75 Kgs
• Shipment Case Dimensions: 36" x 36" x 48"

We are one among the prominent manufacturers and exporters of best quality Circular Body Rolling Machine. The offered machine helps in giving the perfect shape to the cans. Known for its hassle free functioning and perfect finish, the entire range of rolling machines offered by us is highly acclaimed among the client-base, we have accomplished to acquire so far. dimensions.Features: Fine finish Cost effective Low maintenance Cost effective High performance

• Power Source: 220V / 1phase
• Manufacturer: REX
• Model: MANTIS XB1800A
• Motor power: 50-60 Hz
• Spin speed: 70-84 r / m
• Weight machine: 83Kg
• Size machine: 990x510x600

• Warranty: 6 months
• Brand Name: Woodtech
• Cutting Blade Size (inch): 8 inch
• Power Consumption (Watt): 1400
• No Load Speed (rpm): 1440
• Model: WT-117