Civil Engineering Test Equipment Dealers in Midc, Mumbai

To determine compliance with safety requirement of mechanical strength of test samples   Features   Repeated falls from a height of 500 mm Revolution speed of the barrel: 5 RPM Self-contained compact unit that can be floor mounted Laminated wooden barrel mounted on a sturdy support frame Motorized operation enables ease of use Rotation Speed of five RPM, providing a fall rate of ten falls per minutes Steel base plate fixed at both ends of the barrel as specified in the standards Digital pre-set four digits counter with bright LED dual display, membrane keypad selection and battery back-up to memorize count value in case of power cut-off Audible / Visible ‘Test’ indication Transparent acrylic sliding cover allows easy loading and unloading of the test sample, and allows inspection during the test. Cover can be locked during the test Two castor wheels and one adjustable foot provide mobility as well as levelling facility Non-contact proximity sensor ensures reliable operation Barrel JOG Switch to bring the barrel to upright position after end of Test Compact Size, can be floor mounted   Specification     It consists of a wooden barrel, with a shape and dimensions as specified in the relevant standard. The barrel is rotated about its central axis by a motor such that its speed is five revolutions per minute.

Soil testing is the analysis of a soil sample to determine nutrient and contaminated content, composition, and other major nutrient characteristics. A soil test can determine fertility, or the expected growth potential of the soil which indicates nutrient deficiencies, potential toxicities from excessive fertility and inhibitions from the presence of non-essential trace minerals. Soil testing is often performed targeting groups of compounds and minerals which need to be in adequate quantities for the soil to be productive and subsequently give a healthy crop. The advantages of testing are that excessive use of fertilizer can be avoided which results in reduction of Waste of plant & potential damage to environment can be controlled. Therefore it makes good sense to test the soil for these nutrients and add the required amount of fertilizer. Soil has to contain some major nutrient for the crops to be healthy. The major nutrients which need to be in adequate quantities for the soil to be productive and subsequently give a healthy crop are: NITROGEN Nitrogen encourages above ground vegetative growth & it serves as the source for the dark green color in the leaves of various crops. PHOSPHOROUS Phosphorus is a component of the complex nucleic acid structure of plants, which regulates protein synthesis. It is therefore, important in cell division and development of new tissue in roots. POTASSIUM Potassium takes care of multiple functions like Photosynthesis, Protein Synthesis, and Starch formation and for the translocation of Sugars. It also imparts resistance to the plant against Microbial attack and if deficient results in poor flowering and fruit formation. pH pH is important because it influences how easily plants can take up nutrients from the soil. Also is useful in prevention of soil borne disease. ORGANIC CARBON Carbon content of soil is a major factor in its overall health. Soil carbon improves the physical properties of soil and water-holding capacity of sandy soil. Also it contributes to the structural stability of clay soils by helping to bind particles into aggregates of which carbon is a major part, holds a great proportion of nutrients that are of importance to plant growth. It prevents nutrient leaching, and is integral to the organic acids that make minerals available to plants.

Features :  Complies with USP, IP specifications Single drive dual station unit Snap-Click™ loading and a swivel free basket movement Programmable Timer with alarm and Temperature controller External probe for beaker temperature validation Illuminated bath for better visibility

• Color: Chrome Finish
• Weight: 20N
• Usage: Laboratory

Diameter: 5 mmMaterial: Stainless SteelForce exerted on the ball: 20 N

Function Bearing internal diameter measuring and rotation torque test equipment Installed in manufacture line to execute special test   • Test Item External Diameter, Rotation Torque, External Diameter   • Accuracy Repeatability within 3 micron   • Cycle Time 5 sec

• Temperature: 32.0 °C to 40.0 °C (Default setting 37.0 °C).

Automatic rotation through 180 Degrees. Selectable cycling time for 1 minute or as desired.Programmable testing time for 1 min. to 10 hours.Digital display of elapsed testing time.Built-in circulation pump, to maintain the Temperature at 37.0 °C.Temperature settable between 32.0 °C to 40.0 °C (Default setting 37.0 °C).Simultaneous test of 3 samples possible.

All four models are fully portable instruments for assessing the quality of concrete either as in situ or precast. These are designed with field conditions in mind and are very simple to operate. Accuracy and stability is unmatched. Equipment generates low frequency pulses and measures the time of flight in the material.

Constant revolution per minute of roller bar. Ensures uniform mixing of sample prior to aspiration. Eliminates platelets aggregation. Avoids variation in counts. capable of holding both, bulbs and vacutainers.

• Temperature: 20°C to 39.9°C
• Accuracy: ± 0.3°C
• Resolution: 0.1°C

Microprocessor based ED-2L is used for testing the disintegration time of tablets, capsules and other solid dosage forms. ED-2L is designed to meet the specifications of USP, IP, DAB and EUR pharmacopoeia. This latest version offers validation and wide programming parameters with its new micro-controller. The ED-2L design allows easy installation of the unit. A special cam-drive ensures jerk-free movement. ED-2L offers easy loading of the baskets with swivel free movement through a simple yet unique Snap-Click loading mechanism for attaching and removal of baskets. The programmable timer can be set from seconds to minutes and from minutes to hours. This ensures that short and long duration tests can be conducted on the same unit. At the end of the test the baskets are automatically parked at the top position and the timer gives an alarm. Illumination is provided at the base of the tester for better viewing of the disintegration process of the test samples. An acrylic water bath is provided to give uniform temperature in the beaker. The temperature can be set from 20°C to 39.9°C If and is controlled with an accuracy of ± 0.3°C. The built-in RTD sensor monitors the bath D temperature and the external probe monitors beaker temperature. Features Programmable temperature and timer Snap-Click loading and a swivel free basket movement Autoparking of baskets at top position Illuminated bath for better visibility

• Brand Name: TAGLab

We are offering kaplan turbine test rig. Latest model kaplan turbine transparent outlet pedestal with stainless steel draft tube cast iron external bearing pedestal for longer bearing life base frame arrangement & chrome plated, slotted weights with spring balance rigid m.s. Frame work compactly fitted self sufficient package unit suitable for operation without any foundation.

All four models are fully portable instruments for assessing the quality of concrete either as in situ or precast. These are designed with field conditions in mind and are very simple to operate. Accuracy and stability is unmatched. Equipment generates low frequency pulses and measures the time of flight in the material. The time is displayed on screen. The time of flight and the velocity of sound in the material are correlated to estimate the mechanical strength of concrete.Applications• Non destructive strength measurement of in situ or precast concrete.• Crack & Void detection.• Determination of Homogeneity of concrete.• Elastic property measurement of concrete.• Infrastructure Checking.• Construction Testing.• For Research Purpose.• For Students Practical(Civil/Mechanical Engineering Colleges).• To Test Wood,Rocks and similar materials using suitable probes.• To Check Railway Path.• Old Building Strength Check.Features• Compliant with International Standard BS-4408 (Part V – 1974) and ASTM C-597.• Light weight, easy to operate.• Range up to 5 meters using suitable probe.• Fast, Reliable results.• Computer compatible.Additional features for 4600M • LCD display.• Direct velocity measurement.• RS-232 output.• Memory for calibration & measurement data.• Curve fitting for mechanical parameters Vs Velocity Correlation. Additional features for 4600G • Large Graphic LCD display.• Bidirectional data transfer with PC.• Elastic Mode for elastic constant measurement with special probes.• All other features of 4600 M.

The machine comprises of a hollow cylinder, which is horizontally mounted on a strong frame on ball bearings.Abrasion testing machine is used to test crushed rock, crushed slag and uncrushed gravel for resistance to abrasion. The machine determines the resistance to wear of small size coarse aggregates and crushed rocks.

Avail from us, the wide range of Ultrasonic Concrete Tester, which is fully portable. We are known as the chief Manufacturer and Supplier of the cutting edge Ultrasonic Concrete Tester. Our Ultrasonic Concrete Tester generates pulses in low frequency and measures the time, which is displayed on screen of the flight in the material. Applications Determination of Homogeneity of concreteCrack & Void detectionElastic property measurement of concreteInfrastructure CheckingTo Test Cracks in WoodTo Check Railway PathFor Checking Concrete StrengthFor Practical & Research PurposeFor Students PracticalOld Building Strength CheckConstruction Testing Features Compliant with BS-4408 (Part V – 1974) and ASTM C-597 standardsRange up to 5 meters using suitable probeFast, Reliable resultsComputer compatible

• Country of Origin: Made in India
• Power: 1 kW
• Brand Name: PCM
• Display: Digital
• Body Material: SS
• Weight: 45 kg
• Speed: 650 RPM
• Stirrer Depth Adjustment: 25 mm
• Frequency: 50 Hz
• Glass Beakers: 6
• Usage: Laboratory

• Material: SS
• Brand Name: VPMR, Sladjana
• Power (W): 24 kW
• Phase: 3 Phase
• Frequency (Hz): 50 Hz
• Surface Finish: Galvanized
• Power Source: Electric

Blood Roller Mixer, bone densitometer, glucometer strips

All four models are fully portable instruments for assessing the quality of concrete either as in situ or precast. These are designed with field conditions in mind and are very simple to operate. Accuracy and stability is unmatched. Equipment generates low frequency pulses and measures the time of flight in the material. The time is displayed on screen. The time of flight and the velocity of sound in the material are correlated to estimate the mechanical strength of concrete.

Fume Hood, Ultra Low Temperature Freezer

Carbon Content Dispersion Test Apparatus, Sequential Marker

Soil Testing Instruments, Laboratory Instruments, Surveying Instruments