Clamp Meters Dealers in Mumbai

Analog Clamp Meter M7110     We are engaged in trading of a comprehensive range of analogue clamp meters. These are manufactured in compliance with leading industry standards at the facility of the vendors to ensure these finds application various segments. Our range of meters can be availed at market leading prices by the clients based in various parts of India.     Key Specifications/Special Features:   DC voltage: 60V +/- 3% full scale AC voltage: 150/300/600V +/- 4% full scale AC current: 6/15/60/150/300A +/- 3% full scale Resistance: 2K/200 K ohm +/-4% full arc Temperature: -20 to 150 degx C / 0 to 300 deg x F (5% full arc) Operating temperature: 0 deg. C up to 40 deg. C at RH < 80% Power supply: 1 x 1.5V, IEC LR6/AA IEC 61010, CAT II 600V

��meco-g� has introduced a new series of handheld digital clamp meters 3 ⽠digit with backlight lcd display incorporating latest technology. These digital clampmeters can measure ac voltage, dc voltage, ac current, resistance, capacitance, and temperature & frequency. Additional features like diode test, transistor check, continuity check, low battery display, data hold and auto power off is also available. Full range of overload protection circuit, unique design makes these meters superior performing instruments. These meters are useful for various industries, manufacturing units and domestic purposes.

  Easy power checker Single-phase, 3-phase (balanced load only) Phase angle, power factor, harmonic levels True RMS

This is a 3¾ Digit 600A AC Clamp Meter with AC/Dc Voltage, Resistance, Frequency, Capacitance etc.  FEATURES Display : 3¾ Digits with 3999 Count With Backlight & Torch. Non Contact AC Voltage Detector. Low Battery Indication Overload Protection Over Range Indication, Auto/Manual Ranges. Operating Temperature & Humidity : 5°C To 35°C,

• Power: 230 VAC + 20%, 50 Hz.
• Usage: Industrial
• Brand: Prestige Electronics
• Display: 3.5 Digits Red LED
• Range: 0o-360o or + 180o
• Resolution: 0.1o
• Accuracy: Better than 0.1 % + 1 digit
• Dimensions: 1. 96 x 96 x 110 2. 48 x 96 x 110 (mm)

• Application: Laboratory, Industrial
• Operating Temperature: 0 Degree C to 40 Degree C
• Weight: 245g
• DC Voltage: 400mV, 4, 40, 400, 600V (auto ranging)
• AC Voltage: 4, 40, 400, 600V (auto ranging)
• DC Current: 400, 1200A
• AC Current: 400, 1000A (TRMS)

Our compact, low cost Model CM-2 Digital Clamp Meter with True RMS is ideal for general electrical testing and troubleshooting. A few applications include HVAC, automotive, electricalpower, and environmental monitoring uses. The Model CM-2 measures DC and AC voltage to 600 V, DC and AC current to 400 A, and resistance to 40 M ohms. The digital clamp meter features datarange hold and auto range buttons to prevent the screen from updating when gathering values, as well as a zero function. The 3-34 digit LCD features automatic polarity, overload and low battery indication. The Model CM-2 is furnished with red and black test leads, batteries and a carrying case with belt loop

We are offering ac digital clamp meter. Features * jaw opening dia - cable of 40mm * 3¾ digit (4000 counts) lcd for accurate reading. * overload protection on all ranges. * data-hold facility * dca zero button for accurate reading * low battery indication * auto power off * accessories : test leads, carrying case, manual, battery installed

• Voltage: 30.00 V to 600 V,
• Brand Name: Hioki
• Frequency: 1.00 Hz to 1000 Hz
• Usage: Industrial
• Dimensions: 62 mm (2.44 in) W × 260 mm (10.24 in) H × 39 mm (1.54 in) D, 540 g (19.0 oz)

Measuring up to 1500 A ac or dc the DCM1500 also offers 750 Vac and 1000 Vdc ranges making the instrument ideal for use in the installation, maintenance, monitoring or checking of large a.c. or d.c. electrical systems and equipment. The large clear digits of the numeric display are complemented by the high-resolution digital bar graph, useful for indicating trending and fluctuation of measurement. The backlight assists use in poorly lit areas such as distribution cupboards and corners of switchrooms; and the data-hold feature enables use on difficult access cables where otherwise the display may be impossible to see. Min/Max hold provides the ability to store the maximum and minimum d.c. or rms values over a period of time. While storage is taking place, either the present, maximum or minimum value can be displayed. Peak hold stores the maximum and minimum peak value of an a.c. signal at a 10 ms sample rate. The auto-off feature automatically places the meter in power-save mode after 30 minutes from power-on, but this can be disabled if required for min/max measurements. Using the Relative mode (REL), a stable value can be stored, the instrument zeroed at that point, and then any variation from that value is displayed as a direct measurement relative to it. The DCM1500 is safety rated to IEC 61010-1 CAT IV 600 V, and is drop-tested to 1.2 m onto a hard floor. It is supplied with test leads and a carry case, and a full 1-year manufacturer’s warranty.

• FEATURES: 3 ¾ digit LCD, 4000 counts, Multi function 1 000A AC/DC. Large Jaw Size: 60mm. Function Rich: AC/DC Current, AC/DC Voltage, Resistance, Diode, Continuity,

This is a general purpose 3 ¾ digit AC DC Clamp meter with backlit LCD display. The jaw opening is 60mm approx. & can measure AC DC current through the clamp upto 1000A.It also measures DC Voltage-1000V, AC Voltage-700V, Resistance upto 40 M?, Frequency-20MHz with duty cycle, continuity & diode measurements. This meter also has Capacitance range upto 100 ?F & is powered by one 9V battery.

• Size: 120 x 70 x 35mm
• Product Type: Clamp Meter Tong Tester

• Jaw Open (mm): 16 mm
• AC Voltage (Volt): 400 mV - 750 V
• Usage/Application: Industrial
• Frequency Hz: 50 HZ
• Size Mm: 30mm

• Weight: 240g
• Dimension: 230 x 68 x 37mm (LxWxH)
• Model Name/Number: M 266 F
• DC Voltage: 9V
• Brand: Beetech
• Usage/Application: General Electrical
• Jaw Open: 53mm
• Static Electricity: 4mA
• Operating Environment: 0 To 40 Degree Celsius At <80% RH

• Power: 230V.AC +- 15%, 50Hz
• Frequency: 45 To 65Hz
• Application: Industrial
• Range: 0 to 360.0 Degrees
• Input Voltage Range: 50 to 500V.AC
• Brand Name: Prestige Electronics

International warranty Small body and jaws fit perfectly in your hand and into tight places Handy 'Display Hold' button keeps measurements on the display Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch) Large, backlit display (on most models) is easy-to-see In-rush current function (on most models) for measuring starting current for motors, lighting, etc. Auto shut-off maximizes battery life so the meter works when you need it Improved low current measurement accuracy from new microprocessor technology Five different models to meet your exact needs

ACCESS 62 A measures AC currents, DC and AC voltages and resistances. Provided with data hold and continuity check facility with audio buzzer & full range protection

• Display: 3¾ digits (4000 Counts)
• Display size: 13 mm
• Conductor size: 26mm
• Basic Accuracy: ±(0.3%rdg+4dgts)

• Usage/Application: Laboratory
• Brand: Meco
• Digit Display: Digital
• Jaw Opening: Cable Dia. 25mm (max.)
• Model Name/ Number: 72 Auto
• DC Voltage: 600 V
• Resistance: 40M Ohm
• Frequency Hz: 1 MHz

• Relative Humidity: 55%
• Brand: Meco
• Input Frequency: 50 or 60 Hz
• DC Current - Sensing Range: 1000 A
• Battery Voltage: 8 V +- 0.1 V
• Jaw Open: 24 mm
• Input Impedance: >10 G < 40pF
• Resolution: 10 uV

• Type: Electronic Level
• Model No.: DT 369
• Brand: Mextech
• length: 18 cm
• level accuracy: +-2.5 Percent
• Storage Temperature: -10 To 50 Degree Celsius
• Humidity: Less Than 80 Percent RH
• Packaging Type: Box

• Power: 1.5'AAA' Size Batteries
• Weight: 170gms
• Brand: Meco
• Dimension: 185 x 65 x 28mm
• Jaw Cable Diameter: 25mm(max.)
• Battery Life: 200 Hours
• Diode Test: 1.0+-0.6mA Approx
• Display: 3 1/2 Digit 2000 Counts,Data Hold,Max, NCV, APO

• Brand Name: U-NIT
• Application: Industrial
• Battery: AAA Battery
• DC Current - Sensing Range: 100 Amp
• AC Current - Sensing Range: 100 amp
• Model: UT 210E

• Weight: 570 G
• Model Number: CMP-2000
• Dimensions: 281 mm x 108 mm x 53 mm
• Battery: 6LR61 9 V Battery
• Operating Temperature: 0-50 D C
• Storage Temperature: +60 D C

"MECO-G" has introduced a new series of Digital Clamp Meter in 3½ digit LCD display incorporating latest technology These Digital Clamp meters are stable, secure and reliable. These Digital Clamp meters can measure AC Current, AC Voltage, DC Voltage, Resistance, Capacitance, Diode Test, Continuity check, Temperature, Frequency. Additional Features include Data Hold and Back light. Full range overload protection circuit, unique design makes it a superior performing instrument. These Clamp Meters are used in various industries across various sectors for maintenance and manufacturing

• Weight: 160g
• Temperature: -20 to 150 deg. C / 0 to 300 deg.
• Power supply: 1 x 1.5V, IEC LR03/AAA, IEC 61010, CAT II 300V

We offer our clients Analogue Clamp Meter M7150,which are in compliance with the industry standards. These clamps are majorly used in furniture making as these are efficient in holding two wooden parts strongly together. Further, our screws can be availed in bulk quantities as we maintain huge stocks. For our clients, we can deliver quality products within the shortest span of time.

• Feature: DC Voltage, AC Voltage, Currently Buzzer.
• Warranty: 2 Year
• Model Name/Number: DT266
• Battery: 9 V
• Brand: Haoyue
• Usage/Application: General Electrical
• Jaw Open: 16 mm
• AC Voltage: 750 V
• Material: ABS (Body)
• AC Current: 1000 Amp