Coated Fasteners Dealers in Mumbai

• Material: Brass
• Size: M3 TO M56
• Application: Industrial
• Quantity Per Pack: 12
• Standard: ISO, JIS, GB, ANSI
• Finishing Type: FINE
• Material Grade: CS

Introduction PTFE coated Fasteners reduces the friction during use and reuse, it has brilliant anti- corrosive properties and increases the usage life of Fasteners. PTFE coated fastener’s provides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal.Extensive testing and field use have proven that the future of coated fastener’s lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fastener’s were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studs with 2H nuts. Dramatic improvements in efficiency, life expectancy and corrosion resistance are claimed to be imparted to Nut and Bolt connectors by the application of a low friction PTFE coating. PTFE coated connectors have out-performed all others in aggressive any noticeable effect. All the material used for Manufacturing is tested for chemical & mechanical properties. The Results are confirmed to meet original material requirement before processing.   Application PTFE Coated Fasteners have a well established reputation of doing brilliantly in the corrosive atmospheres prevalent in offshore oil and gas, offshore rigs & platforms, shipping, chemical, pharmaceutical, deep sea drilling, shipping, and marine, and power, and nuclear, electronic petrochemical, fluid. Why use PTFE Coating PTFE is non-stick, non-toxic self-lubricating and non-wetting,. It has brilliant anti-corrosive properties, superior heat resistant and has cryogenic constancy. All these properties of PTFE Coating creates a long term advantage for a PTFE user. Technical Specifications: Use Temperatures Working temp. range up to + 260°C Corrosion Resistance Salt Spray (ASTM B117) up to 3,000 hrs (Nuts not frozen) Pencil Hardness 5H – 6H (ASTM D3363-92A) Kinetic Friction Coefficient 0.06 – 0.08 Thickness Nominal 0.001” (1 mil) Impact 160 in lb (ASTM D2794-93) Adhesion 5B (ASTM D3359-95) Elongation 35%-50% Tensile Strength 4,000 psi Operating Pressure Up to 100,000 psi

DACROMET 320 is a an aluminium-grey, non-electrolytic, thin coating for anti-rust protection of steel, cast iron and other ferrous metal parts. It is composed of thin zinc and aluminium plates in a chrome oxide mould. Dacromet 500 also has an integrated lubricant, DACROTIZING is the process whereby the aqueous dispersion is applied by cold immersion or spray and is therefore free of any risk of hydrogen embrittlement. The coating thus produced is passivated throughout the film and provides high performance corrosion protection.

• Stud & Bolts: ASTM A 193 : GR B7 , B7M , B 16 , L7 , B8 , B8M , SS 306 , SS 316

Corrosion Protection and Resistant Products and Services for the Oil, Gas, Petrochemical, Power , Marine Industries and Offshore IndustriesWe are proud to introduce ourselves as the Pioneers in Fluoropolymer PTFE Fluorocarbon Coated Fasteners, Studs, Bolts, Nuts, Washers, Screws

The offered rubber products are appreciated for being made in tune with the industry standards. Our product range is inclusive of Industrial Bellows, Expansion Joints, etc. These products find wide usage in electrical automobiles, paper, plastic and cement industries. The offered products are known for their durability, resistance towards wear & tear and seamless finish.

coated fasteners This coating combat the severe corrosion that affect the massive studs & nuts on oil drilling rigs & petrochemicals processing equipments, as well as other items associated with the chemical processing industry. These coatings also permit the use of less expensive & stronger metal in place of stainless steel & other more exotic and costly materials.

We are offering ptfe coated fasteners. Please find pictures of xylan coated fasteners we have recently exported.

PTFE coated Fasteners reduces the friction during use and reuse, it has brilliant anti- corrosive properties and increases the usage life of Fasteners. PTFE coated fastener’s provides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal. Extensive testing and field use have proven that the future of coated fastener’s lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fastener’s were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studs with 2H nuts. Dramatic improvements in efficiency, life expectancy and corrosion resistance are claimed to be imparted to Nut and Bolt connectors by the application of a low friction PTFE coating. PTFE coated connectors have out-performed all others in aggressive any noticeable effect. All the material used for Manufacturing is tested for chemical & mechanical properties. The Results are confirmed to meet original material requirement before processing. Application PTFE Coated Fasteners have a well established reputation of doing brilliantly in the corrosive atmospheres prevalent in offshore oil and gas, offshore rigs & platforms, shipping, chemical, pharmaceutical, deep sea drilling, shipping, and marine, and power, and nuclear, electronic petrochemical, fluid.

coated fasteners which are high on demand list in the market that contain PTFE or other types of lubricants. The coating of xylan provides effectve solution to the problems in engineering construction regarding wrong surface properties arises. Moreover, the xylan is used as a coating material on alloy steel fasteners, aluminum and copper fasteners owing to various features including

• Thickness: Nominal 0.001” (1 mil)
• Pencil Hardness: 5H – 6H (ASTM D3363-92A)
• Tensile Strength: 4,000 psi

PTFE coated fastener’s provides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal.Extensive testing and field use have proven that the future of coated fastener’s lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fastener’s were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studs with 2H nuts.

Ptfe Coated Fasteners, PTFE Coating, xylan coating

Ptfe Coated Fasteners, polytetrafluoroethylene coating

coated fasteners, Stainless Steel Threaded Elbow, Bimettalic Strip

Xylan Coated Fasteners, Zinc Nickel Plating Service

Coated Galvanized Fasteners, Plain Washers, Industrial Angles

coated fasteners, Stainless Steel Sheet 316L, API 5L Gr. X42 L Saw Pipe

ASTM A193 B7 PTFE Coated Fasteners, Galvanized Hex Bolt, allen key bolt