Cold Storage System Dealers in Andheri, Mumbai

• Material: Metal
• Warranty: 1 Years
• Condition: New

We Sgct Manufacturing All Types Of Distribution System Like Hot Dip Galvinse, Pvc,Frp ,PVC Lateral Pipe & And We Design As Per Water Capacity With Lateral Pipe With This We Offer To Our Client Flow Control Valve.

When lubrication is required as well as cooling, lubricating mist can be reduced and cooling enhanced.Heavy coolant can be messy, costly and must be carefully maintained. Dry machining is not always possible due to the need for lubrication or additional cooling that cold air alone cannot provide. The unique patent pending low cost Frigid-X Sub-Zero Vortex Tool Cooling Mist System is ideal for these applications. The unit is comprised of a coolant/lubrication suction system which draws any water based liquid into a specially designed delivery system. This cools the liquid to deliver a very cold fluid "mist" at around 40 degrees F (5 degrees C). This cooling allows for as much as 20% less coolant needed, faster production rates and improved quality. An Adjusting screw controls the amount of mist required. Simple operation, no moving parts except for the adjusting screw means long life, low cost operation and zero maintenance. APPLICATIONS Solid Carbide End Mills Wherever lubrication is required in machining When cooling is required beyond the capability of cold air alone ADVANTAGES No electricity required - simplicity in design Low Cost Reduces coolant / lubricant cost by using less fluid Improves safety with less mist No moving parts except for an adjusting screw for the fluid Small and lightweight - portable Maintenance free operation

• Storage Capacity (in Ton): 1-100 Ton
• Phase Type: Three Phase
• Body Material: Stainless Steel
• Number of Door: Single Door
• Deals in: New
• Application: Food Industry
• Size: 6x6 feet onwards
• Insulation thickness: 60 mm
• Temperature Range: 2-20 degree Celsius

Osworld Cooling Incubators are designed to serve a wide array of requirements, more specifically to conduct life cycle testing, shelf life studies, general incubation and refrigerated storage. These Cooling Incubators guarantee extremely accurate temperature regulation and uniform temperature distribution. Features Cooling Incubator • Temp. Control: Microprocessor-based PID Control with Auto-tune, CE Marked • Temp. Sensor: PT 100 RTD, Class "A" • Temp. Display: Digital LED, 3½ digit • Heating: U-shaped Nichrome wire heater in SS Sheathing • Cooling: CFC Free compressor utilizing R134A eco friendly refrigerant, with condenser, motor and relay. Complete Unit – Copeland Make. • Air Circulation: Flange motor with Impeller Blower • Chamber Illumination: Fluorescent light with door switch • Feet: Castor Wheels • Trays: SS Wire Mesh, Heavy Duty • Construction: Double-walled with Poly Urethene (PUF) insulation provided with outer stainless steel metal door and inner glass viewing door

Modular Cold Rooms are standard preservation chambers built at site to desired dimensions and cooling specifications. Blue Star’s Modular Cold Rooms use world-class PUF Insulated Panels manufactured by Blue Star at state-of-the-art facilities, and Refrigeration Units from Blue Star’s facilities and from partners from across the globe, to offer you totally reliable cooling and preservation chambers specifically built for your needs. Modular Cold Rooms are built best by experts who understand all aspects of preservation. And Blue Star's Cold Room experts possess both extensive and intensive domain knowledge of your industry - knowledge that helps us design and deliver efficient, reliable and precise Cold Room solutions for your exact need. Some of the industries we serve: Hospitality Dairy Horticulture Medicare Pharmaceutical industry Seafood Speciality applications

• Range: 100 Amps to 800 Amps

All busbar come with fabricated body, rust protected and Phosphated in 7 tank process. All the sides of our busbar are detachable to facilitate easy wiring and allow expansionextension by coupling to another busbar. We use electrolytic Copper rectangular dual rods designed to be used with our clamps and sockets to facilitate all 3 types of cable sockets namely soldering type, lugs or flat copper strips. Our Busbar design ensured the correct rating all through out its use and will not allow any over load as the conventional model widely used in our country. No drilling required in our design, just add as many clamps to connect additional cable up to the limit of the length of the dual copper bars.

• Feature: Low maintenance, Accurate dimension, Robust in design, High durability
• Automatic Grade: Fully Automatic
• Material: Stainless Steel
• Phase: 3
• Product / Goods Details: Vegetables

• Usage:: Process Testing Machine
• Power:: Electronic
• Brand Name: FIBROTECHNIKS

We design and manufacture laboratory chamber used for testing and research applications. these laboratory chamber are made in polypropylene / pvc / frp / as per clients requirement. we also supply blower required for these laboratory chamber.

Ice Plant Equipments, Plate Freezer, shell condenser, shell condenser

• Temperature Range: -180° C To 100° C

Turnkey Cool and Cold Room Solutions, right from Conceptualization, Heat-Load Calculations, Design of Structural Panels as well as Thermal Control Systems and CA systems, Manufacturing to Commissioning and Installation.Complete sealing of air gaps in the Cold Room panel joining system by use of tongue and groove interlocking system, doubly ensured air tightness by cam locking system.Imported PUF forming chemicals from BASF and Dow, implying uniform PU density. This helps in maintaining uniform temperature throughout the Cold Room zones minimizing the possibilities of temperature leaks.

We are offering heat cooling systems. Backed by a team of highly experienced professionals, we are involved in providing a wide range of heat and cooling systems.

We are leading manufacturer and supplier of product cooling systems like air cooling system or direct contact cooling and indirect contact cooling.

The solid state cooling system is based on peltier effect & can be used for applications such as viscosity bath & other small cooling application  These are basically miniature Thermoelectric Solid State Systems, designed on peltier effect. In many situations, need of analysis at subambient temperature arises. The lab chemist has to use either an elaborate and bulky compressor based cooling system or use ice. Both have their own disadvantages. These Systems are simple, sturdy & occupy very small bench space. No compressor no noise, no vibrations. No Ice, no mess. All SolidState design, no moving parts, virtually maintenance free. These are suitable to carry out Titration at subambient or at elevated  temperatures, to maintain Cell Holder Temperature, viscosity measurement, to cool vials & test tubes etc. Model MCS - 150 For  titrations at sub ambient or at elevated temperatures : In this case the titration beaker ( 55mm Dia) is inserted in the block which is kept at desired temp. Application : Titrations for diazotisation , SAP value and pH Stat

Chilled Shower Bath System, Steam Bath Equipment

• Type: chilled beams
• Condition: New
• Operating Voltage: 380/400 VAC
• Capacity: 3HP-50HP
• Certification: ISO-9001:2008
• Mounting: Floor Standing

We are the main supplier of this product.

We are providing a various types of products such as chilled beams.

Air Cooling Systems, Horizontal Milling Machine, seamless tube

package chiller, Ice Plant, wooden cooling towers, brine chillers

cold chamber

Magnetic Pump, Canned Motor Pump, Sealless Pump, package chillers

cooling systems, Cooling System, Ice Machines, Refrigeration Systems

marine cooling systems, Screw Water Chillers, Packaged Chillers

Spiral Fin Tube, Fin Tube, Sealing Machine

Oil-Air Cooling Systems, Lube Oil Filtration Systems