Cold Storage System Dealers in Mira Road, Mumbai

• Power: AC
• Dimensions: 6X6X6 ft
• Voltage: 220 V
• Frequency: 50 Hz
• Country of Origin: Made in India
• Usage/Application: Food Refrigeration, Storage for Edible Foods, Fruits, Meat, etc.

• Automatic Grade: Fully Automatic
• Power: 2.50 kWh
• Voltage: 380-480 V
• Frequency: 50-60 Hz
• Usage: Commercial
• Temperature Range: 2 to 8 Degree C
• Body Material: PUF Insulated Panel
• Insulation Thickness: 60 to 200 mm

Pre-fabricated, insulated, metal laminated panels best suited for freezing and chilling Rigid polyurethene Foam (RPUF) insulation Pre-painted Galvanised Steel (PPGS) or Stainless Steel (SS) metal laminate Insulation thickness from 60mm up to 200mm Panel width of 1200mm Panel length up to 12500mm Joinery through camlock and finished with a silicone sealant.   Pre-fabricated, insulated doors with great features Swing, sliding, roll-up types Non-corrosive, non-metallic hinges, door handles, and locks Self-closing hinges Heaters in door leaf and frame Audio alarm for 'door-open' condition View port with anti-condensate glass Lock defeat mechanism Positive seal mechanism for all door types to avoid cold air loss.

Also known as Environmental Test Chambers /Humidity Control Ovens – Double Walled – Inner SS – Outer MS – 3" Gap Puff insulation; Full length inner glass door for clear inner vies  Outer metal door with magnetic gaskets & lock. Forced air circulation for uniform temperature throughout the chamber. Dual display preset electronic digital Temperature controller Cum Indicator with cooling system by means of Hermetically sealed Compressor Unit coupled with evaporation Coil and Condenser. Temp. Range 10ºC to 60ºC 1ºC; Humidity Range 40% Rh to 90% Rh 3% Rh.  

Instec was founded over two decades ago by a group of pioneering liquid crystal researchers, therefore our microscope heating and cooling stage systems are designed specifically with liquid crystal applications in mind. Over the years, Instec has continued its effort to respond to the needs of the experimental community and has developed a series of thermal stages to suit different application needs. Our heating and cooling stages offer many features which are unique in the marketplace, such as dual heating with variable sample chamber height, large viewing aperture, and easy electrical access to the sample. Instec hot and cold stages have been used in a variety of research fields, including:

Traditional Heating & Cooling Systems Active Pharmaceutical Ingredient (API) manufacturing involves batch reaction, work-up, distillation, crystallization, hydrogenation, layer separation, filtration and drying as unit processes. Again, batch reaction involves heating and cooling stages ranging from -50°C to +250°C. Traditionally, this was being done with multiple utilities such as chilled brine, chilled water, cooling water, hot water, low pressure steam, high pressure steam, thermic fluid etc. Limitations Different heat transfer fluids (HTFs) may require separate coils, heating and cooling jacket zones or external heat exchangers. Time consuming changeover of HTFs and associated risks of human error. Cross contamination of HTFs. Multiple utilities can corrode the reactor jacket. Condensate recovery is not feasible. Inefficient management of HTFs leading to inaccurate temperature control. Process parameter deviations adversely affect product quality. Complicated mechanical design, and Increases capital/maintenance costs.

Cold Storage, Ocean Freight Services, reverse logistics

cold storage system, air conditioner plant, Air Cooling System

Air Evaporative Cooling System, Air Washer Cooling Pad