Color Sensors Dealers in Mumbai

• Type: I MARK
• Frequency: 50-60 Hz
• Sensing Method: For colour sensor
• Brand: Datalogic
• Supply Voltage: 10 to 30 V DC
• Housing Material: Stainless Steel
• Packaging Type: Box
• Response time: 50 Sec

Color sensors detect subtle color contrasts to inspect registration marks, using one, two or three color LEDs.Senses a variety of color marks without changing sensors, Offers configurable light- or dark-operate outputs and optional 30 milliseconds ONOFF-delay, Easy-to-set TEACH options: Dynamic or Static using push buttons, or remote switch,Easy-to-read, 8-segment bar graph display for TEACH and signal strength.

Key Features   True 1-Bit RGB color sensing 2 beam white LED spot focusing Ambient light cancellation Programmable spot LED Intensity PC based RS232 Configuration Programmable Red, Green, blue contrast sensing   User Interface LED Mode Indicator Color selection keys (col1 & col2) Actuation /adjustment keys (Left & Right) Command Set: Refer Product Manual Application   Standalone Color Sensor Compatible with Web guide Controller WGS-03 Line/Edge Guide System Output     RS232 Serial Communication Baud rate: 115200 bps1 stop bit, no parity bit

• Sensing Method: Diffuse Reflective
• Light Source: Red LED (635 nm), Green LED (525 nm), Blue LED (465 nm)
• Switching Output: PNP
• Degree of Protection: IP67
• Sensing Distance: 18 to 28 mm
• Supply Voltage: 10 to 30 V DC
• Spot Size: 1 x 4 mm

  Description: 1.Case Material: ABS 2. LED Emitting Color: Green/Red/Blue 3.Internal Diameter:1.5CM, External Thread Diameter:2.2CM 4.Item Size:3.5x2.4x2.4CM 5.Color: Silver Features: 1.This little device fits on most taps and lights up a set of LEDs when you turn on the tap. Transforming the stream of water into a beautiful waterfall of light. 2.The sensitive faucet light will change colors according to the temperature of water. 3.The color's change remind you the water's temperature. Water flash red when temperature above 50°C Water glows Red when water is Hot (temperature above 42°C). Water glows Green when water is Warm (temperature is 33°C - 41°C). Water glows Blue when water is Cold (temperature below 32°C). 4. No batteries and external power supply, it will illuminate after water flows down.

• Brand: Panasonic
• Light Source: Red LED (635 nm), Green LED (525 nm), Blue LED (465 nm)
• Output mode: Push-pull
• Housing Material: Plastic
• Model Number: LX111
• Sensing Method: Diffuse Reflective
• Connection Type: Cable
• Response time: Below 200ps
• Supply Voltage: 10 to 30 V DC
• Sensing Distance: 10 mm
• Spot Size: 1 x 4 mm

color sensors

color sensors, Color Reader Cr 10 - from Konica Minolta Japan

color mark sensor, Current Transformer, Baumer Proximity Sensor

13” Color CCD Image sensor, 420 TVL, 0.02 LUXF1.2, AGC, BLC (Auto), 160 (150) to 100,000 sec (Electronic Shutter), 24 LED, Bullet Camera, Built in Auto Electronic Shutter, IP 66 approved outdoor housing, IR effective range upto 20 Meters

colour mark sensor, photo cell unit

Sugar Color Detecting Sensor, Liquid Detection Sensor, Photoelectric Sensor

Tcs 230 Colour Sensor, sensor modules, micro gear motor

color mark sensor, Socket & Relay