Commercial Air Conditioner Dealers in Kanjurmarg East, Mumbai

Air handling is the major area where highly reliable and efficient motors are required. CG has got a variety of motors in different electrical starting arrangements and constructions to suit customer requirements. These are basically in rolled steel powder coated body with Permanent Split Capacitor (PSC) or 3 Phase types. Thermal protection is optional and provided against requirement.

• Voltage: 220V

Positioning in the Plant : The chilling Tank along with chilling unit is installed after the cascade cooler.   Primary Function : It is one of the important stages of the process where moisture & CO2 is separated partly from the air before entering the Molecular Sieve Battery. The air from the cascade cooler passes through the chilling tank, which contains chilled water at a temperature of 60C to 100C. This water is chilled by a Chilling unit. In the chilling tank the moisture entrapped in the air further gets condensed and is separated out as moisture. This moisture is collected in the Moisture Separator and is drained out.   Spares Requirement : For the efficient functioning of the Chilling Unit, some of the important spares are listed below : Freon Compressor Copeland make Piston Rings Piston Connecting Rods Big End Bearing Small End Bush Mechanical Seal Expansion Valve Thermostat High & Low Temperature Tripping Device Suction & Discharge Valve Reeds  

• Feature: Adjustable, Auto Reverse
• Application: Volume Control
• Material: Galvanized Steel
• Blades Size: 150mm to 500mm
• Automation Grade: Manual
• Maximum Velocity: 10 M/Sec

With excellent storage facility, we can effortlessly fulfill urgent and massive requirements of the customers. Also, we maintain complete records of the delivered products. With us, clients can stay rest assured for the security of the payment. For the convenience of the clients, we accept cash payments along with bank transfers.

The Cosmos range of air distribution products are presented in this Website. It is manufactured and marketed by Spectrum Industries Mumbai, Bangalore and Chennai office pioneered advance products for HVAC industries and continues to be an industries leader with modern manufacturing equipment, design capabilities and testing laboratory for research and development. The entire range is designed and manufactured to satisfy the aesthetic requirements of architects and interior designers and at the same time taking care.

As we take complete care of the products that we offer, we make excellent arrangements for their storage as well. Thus, there are minimal chances of damage at buyer's end. Our experts keep a stern check on the payment procedures that are a crucial part of the buying the products. We make sure that you don't face any issues related to transaction.   Features : Exceptional standards Affordable Prices Good quality

• Brand Name: Daikin
• Material: Stainless Steel
• Color: White
• Power: 3-6kw
• Operating Type: Automatic
• Chiller Shape: Rectangular
• Voltage: 220V
• Finishing: Polished
• Driven Type: Hydraulic
• Usage: Air Cooling

• Size: 5inch, 6inch, 7inch, 8inch
• Material: Ceramic
• Shape: Round, Square
• Thickness: 5mm
• Application: Exterior Decor, Interior Decor
• Color: Available in many different colors
• Feature: Light Weight, Shiny Look

• Air Curtains: Rs. 15000
• Dust Collector: Rs. 85,000/-
• De-Blister: Rs. 65,000/-

S s 304 air curtains used in pharmaceutical companies, fish & meat cold storage. It is fixed on the top of the entrance as invisible barrier for maintaining the room temperature.

• Size: Multisize
• Type: Ceramic Diffuser
• Material: Ceramic
• Shape: Rectangular, Round
• Application: Exterior Decor, Home, Hotel, Interior Decor
• Color: Multicolor
• Feature: Heat Resistance, Humidity Control, Long Life
• Appearance: Antique
• Country of Origin: India

We manufacture and supply a wide range of Wine Chillers to keep the wine cool even in sweltering hot to quench the thirst of wine buffs. Our Wine Chiller is designed with the latest technology and quality stainless steel ensuring its superior quality. It is easy to use and long lasting in nature. Features : Excellent designs Smooth functionality Low maintenance

• Brand Name: Carrier
• Cooling Capacity: 1 - 5 TR

  The given cooling power is at 40°C ambient temperature. Increase in ambient temperature will affect performance of machine The temperature range mentioned above is at outlet of the chiller machine hence temperature inside the process / load may vary due to various factors like process design, distance, head, insulation etc.

• Type: Box, Flange
• Efficiency: Eu9 to Eu13
• Frame: Aluminium / SS
• Media: Borosilicate Fiber Glass

Packaged AC is available in air-cooling and water cooled version. The Packaged AC is known for its high efficiency and power saving features. The Packaged AC is used widely for hoe robust make using steel. The Packaged ACs is compressed with just 3 moving parts making it less noisy. Features  Air-cooled : Available in 5.5, 8.75, 11, 16.5 and 22 TRWater-cooled : Available in 5.5, 11 and 16.5 TRHigh efficiency saving up to 10% electricityUser-friendly,Feature-packed Micro Controller Download

Water Chiller innovatively customized for Industrial, Engineering Purpose. Also used in SPA, Leather Industry, Plastic industry & so on.

• Features: High capacity in a robust-yet-compact design, Chilling-specific, intelligent controller provides fault condition warnings, Easy to use and maintain
• Type: Air-Cooled Portable Industrial Chillers

• Usage/Application: Industrial
• Phase: Three Phase
• Frequency: 50-60 Hz
• Voltage: 280-320 V
• Finishing: Polished

• Port: Shanghai, Ningbo
• Packaging Details: customized packing
• Supply Ability: 1500 Unit/Units per Month

Air Lock Doors (main and for fuel) Material: SA516GR 70 Size: max 4500 x 5270 (ht) mm Weight : 16 Ton / 11 ton Heavy Fabrication, Machining & Assembly with door opening closing mechanisms Shop testing and demonstration

A number of design variables can come into play when selecting and designing a process cooling system. The following formula commonly is applied. Q (BTUs) = W x Specific Heat x gT Where W is the weight of material to be cooled. Specific Heat is a heat constant taken from tables. gT is the initial temperature minus final desired temperature. Note that 1 ton of refrigeration is 12,000 BTU/hr.

• Capacity: 30TR to 750TR
• Temperature: (+) 17°C to (-) 75°C

Screw chillers with Open type compressors With High efficiency, high heat flux tubes of WIELAND, Germany make in Copper (for refrigerant other than Ammonia),Evaporator (Chiller) shell & tube - Flooded, DX type with seamless tubes, Plate type heat exchangers (PHE) with SS 316 plates of reputed internationally known makes,Customized design and development e.g. Two stage, Dual temperature operation, Hazardous area classification.PLC based user friendly control panel, necessary safety interlocks and auto manual operation of the chiller. Provision for communication with DCSSCADA, Data logger, Instruments & controls of reputed makes as per Industry standards.

We are offering Sun Louver System. ss aerofoil louver fixing system ss aerofoil louver fixing system dwg1uss aerofoil blade and accessories dwg 2 have the blade is installed at the fixing place one end is fixing, the other is flexible , meet the demand of thermal contracting invested by winsom (hongkong) construction technology co., limited, winsom (xiamen) construction technology co., ltd is a high-tech building materials comprehensive enterprise, which combines research &development, design, manufacturing and trade with brand of winsom. the development and production of winsom are all based on advanced european technology and manufacturing technique. with the business philosophy of “the value of company development should be equal to create value for customers", winsom regards products and services as the foundation and guarantee of survival

• Inner Chamber: SS Duly Polished
• Outer Chamber: M.S. Powder Coated / SS
• Insulation: Duly insulate by P.U.F.
• Flow capacity: 20 ltrs. / min at height of 1 meter
• Outlet connection: 3/8” OD

The recirculating chillers are designed to handle high cooling capacities. These chillers operate in the temperature range from +5ºC to atmosphere and have built in high pressure pump. These chillers are useful to cool other instruments which generate heat. Viz. Lasers, Furnaces, XRD, etc., Graphite Furnace, Fermenters, Thermal Instruments, Rotary Evaporator. Water Chiller Unit: It consists of chilled water storage tank of about8-15 liters capacity along with Compressor, Condensing Coils,Cooling Fan, Temperature Controller Programable type, Water Inlet & Outlet connection and chilled water circulation pump to circulate chilled water through S.S. cooling coils and bring back to chiller tank.• Control Panel consists of temperature & ready status of Chiller ON/OFF Switch, with Red Coloured Indicator Green coloured indicator which indicates      Initial Power ON• This has an Inbuilt delay of about 1-2 minutes for the Compressor  to be ON.• Switch for Chilled Water circulation pump. This has no time delay.• This is fitted in a Floor Mounting type with Castor Wheels (optional).

nter the high, mighty and giant Komatsu’s 830E-AC Electric Rear Dump Trucks…decked up in strings of marigold flowers, and gleaming in the mines of Hindustan Zinc Limited (HZL) in Rajasthan. This handing over event of the newly-commissioned 240-ton trucks on 26th February 2010 at HZL’s Rampura-Agucha Site has well become a defining moment in the history of L&T’s Mining Equipment Business. At the appointed hour, the guests arrived at the speciallyerected pandal overlooking the fleet of trucks. A traditional puja was conducted at the project site

• Material: Aluminium
• Color: White
• Feature: Durable Coating, Tamper Proof, Water Proof, Corrosion Resistant
• Available sizes: 300x300 mm to 1200x1200 mm
• Usage: Used for Shading
• Working Temperature: 1 to 60 deg C
• Thickness: 6mm - 8 mm

Our skilled team holds utmost specialization in fabricating a broad assortment of aluminium Fix Louvers that are particularly designed and fabricated for modern industries, commercial offices and civil constructions. These fix louvers are used for maintaining a healthy work atmosphere in the offices. Our range of fix louvers is in complete harmony with the customer requirements and is offered at cost effective prices.

We are listed at the apex in the list of the forefront Plastic FRP Ducting Exporters from India. The use of optimum quality materials in the manufacturing of the FRP Ducting ensures high durability, tensile strength and resistivity to adverse conditions. Additionally, customers are eased with the availability of the Fiberglass Reinforced Plastic Ducting in varied sizes and dimensions confirming to international standards.

• Weight: 500 KG
• Material: SS
• Country of Origin: Made in India
• Color: Grey

• Features: compact in designs, highly efficient, cost-effectiveness, reliable performance.

• Colour: Multicolour
• Depth (mm): 18
• Width (mm): 11
• Height (mm): 40