Compressed Air Dryer Dealers in Mumbai

Ingersoll Rand’s refrigerated dryers offer design features that reduce energy consumption and improve reliability.Corrosion-resistant heat exchangers reduce airflow restrictions, providing more efficient throughput with less wasted energy. A built-in stainless steel demister efficiently removes all moisture.Reliable, fully hermetic compressors use environment friendly R134A refrigerant.

The theory behind operation of Heatless Dryers, is very simple. Chemicais which have the capacity to adsorb moisture on its surface. These adsorbents are used to dry the air. The adsorber are packed into two columns. The Cornpressed air is passed through this Column of packed adsorbent dessjcant. It is obvious that after a certain period or drying (i.e. few hours few minutes) the dessicant looses its capacjty to adsorb more moisture and hence is not capable of drying any more air, in its present Condition. The drying Capacity of the dessicant is restored by the process of regeneration.

How does it workRegenerative desiccant dryers normally are of twin tower construction. One tower dries theairtrom the compressor while the desiccant in the othertower is being regenerated afterthepressure in the tower has been reduced to atmospheric pressure. Regeneration can beaccomplished using a time cycle or on demand by measuring the temperature or humidity inthe desiccant towers or by measuring the dew point ofthe air leaving the on-line tower.In the heatless regenerative desiccanttype, no internal or external heaters are used. Purgeair requirement can range up to 18% otthe total air-flow. The typical regenerative desiccantdryer at 1000 psig has a pressure dew point rating of-40°F but dew points down to -100F can be obtained. Advantages of Regenerative Desiccant Type Dryers include : Very tow dew points can be achieved without potentiai freeze-up. Moderate cost of operation forthe dew points achieved. Low maintenance costs. Heatless type can be designed to operate pneumaticallv for remote, mobile or hazardous locations.

• Condition: New
• Automatic: Automatic

Silver Line Series Gold line Heatless dryer

Suitable for extensive industrial usage, our Heatless Dryers are of unmatched standards. We fabricate them using the latest CAD/ CAM technologies. Therefore, our entire range is structurally reliable, dimensionally accurate, excellently finished and durable. We provide Heatless Dryer in various designs and sizes to meet varied requirements of buyers. In addition, we offer customized solutions. Buyers can get Heatless Dryer from us anytime and expect on time delivery of consignments.

Compact, light weight and durable are some of the attributes of our Heatless Air Dryers. We are an established Manufacturer of Heatless Air Dryers from Maharashtra. The Heatless Air Dryers have a capacity of 5 CFM to 100 CFM and trouble free valve design. Simple and easy to install, our Heatless Air Dryers can be wall mounted. Low power consumption, automatic and maintenance free operation make our Air Dryers the preferred choice among buyers.

  Refrigerated Dryers, Desiccant Dryers and Filters; Air quality can have a significant impact on compressed air systems. Properly treated compressed air, and the right air dryer, will improve productivity, system efficiency, and product or process quality. Choosing the appropriate air dryer and compressed air filter is very important. By choosing an BOSS air dryer or compressed air filter, you are buying high quality treatment products that will enhance your entire air compressor system. BOSS air compressor has the widest selection of air treatment products and application knowledge to protect your investment and compressed air system.

Product range : 10 to 1000 cfm Due point -20°C Low Maintenance Cost

• Type: Air Compressor
• Color: Blue
• Feature: Durable, High Performance, Low Maintenance, Stable Performance
• Voltage: 230V/1/50Hz
• Condition: New
• Power Source: Electric
• Pressure: High Pressure
• Motor Power: 0.5 - 10.6 HP
• Warranty: 1Year
• Configuration: Air Compressor
• Flow Rating: 25 CFM to 2825 CFM
• Country of Origin: India

We are regarded as Refrigerated Air Dryer Manufacturer, Exporter and Supplier in Maharashtra. Refrigerated Air Dryer, provided by us, has shell and copper tube heat exchanger. Refrigerated Air Dryer that we provide are efficient in power saving. Our Refrigerated Air Dryer has a non-cyclic system with provision of hot gas bye-pass valve. With compact design, our Refrigerated Air Dryer is highly in demand. Moreover, Refrigerated Air Dryer that we offer can easily bear HP, LP, WP overload safety trips. Range : 20 CFM to 5000 CFM

• Warranty: 12 months
• Usage/Application: Air Dryer
• Drying Capacity: 20 cfm
• Dryer Technology: Refrigerated
• Dryer Horse Power: 5 HP
• Brand: Ingersoll Rand
• Minimum Output Dew Point: 0-3 Degree Celsius
• Maximum Pressure: 10 bar

This high efficiently cooling module has a direct effect on reducing energy consumption & pressure drop. The main Features are Tube in tube type evaporator. CFC free , Eco friendly refrigerant used in system. The precise & accurate Hot gas By Pass Valve , which prevents the formation of ice inside the evaporator. The high efficiency condensate separator is located within the heat exchanger module. No maintenance is required and gives a high degree of moisture separation. Compact design , requires less floor space. Range from 15 CFM , capable to work up to inlet air temperature of 60˚C.

• Voltage: 220 V
• Frequency: 50 Hz
• Maximum Pressure (in bar): 14 bar
• Dryer Brand: Samarth Air
• Drying Capacity (in cfm): 20cfm
• Inlet Temperature: 50 Degree C

• Automation Grade: Semi-Automatic
• Voltage: 420 V
• Dryer Type: Refrigeration Dryer
• Brand Name: Risheng
• Usage: Industrial
• Power Source: Electric

• Weight: 820 kg
• Working pressure: 0.27 bar
• Length: 1200 mm
• Height: 1829 mm
• Width: 1075 mm
• Model: AD480

We are offering compressed air dryer.compressed air dryer is one of the major products of the company. Our compressed air dryer is equipped with the new compressor. This compressed air dryer is also equipped with inbuilt compressor protection facility to have durability in the long run. We offer it at the market leading rates. Compressed air dryer employs the advanced coil-in-coil technology, where in you have one tube inside another tube. This arrangement enables transfer of heat between the refrigerant and the compressed air. For refrigerated air dryers, the temperature differential between the air and the refrigerant causes absorption of heat energy from the air; hence, reducing the temperature of the compressed air. This causes the moisture to condense. featuresnew compressorinbuilt compressor protectionoverload protectionpolished enclosureadvantageeconomicalhigh performancebalances temperature balances moistureproduct detailsemerson-copeland / hitachi (optional) compressornew compressor (most of the competitors use r type (repaired) cheaper ones for cost reduction)reciprocating / rotary (optional) technologyall metal (crca powder coated / ss 304) enclosureinbuilt compressor protection for long lifeinbuilt mcb overload protectionbi-color powder coated / ss 304 buffed and polished (optional) enclosureapproved by cipla, dr reddy’s, aurobindo, dabur, godrej, raymond, iitspecialtyduex refrigerated dryers provide a constant pressure dew point +2 – 5 °c.employs the developed coil-in-coil technology (one tube inside another tube)moisture separator in order to remove the condensed moisturefor every 20°f drop in temperature of the compressed air the moisture holding capacity of the air reduces by 50%.

PNEUM SYSTEMS INC, has developed Heatless Air Dryer which is a chemical desiccant using dryer, working on adsorption principle. The system consists of twin towers filled with desiccant of appropriate quality and quantity. Wet compressed air after being filtered by the prefilter and coalescing oil filter enters the distribution valve. An electrically operated valve with built in passages, which directs the air to one tower. The air is then passed through the tower and comes out in dry condition. The air is then passed through after filter to remove any carry over dust, via non-return valve. There is a by-pass arrangement with an orifice, to allow a fraction of dry compressed air to expand and pass through the other tower, here by regenerating it and making it ready for adsorption Cycle. The Regenerating air is passed out to the Atmosphere via muffler. At a preset time, the sequence control timer actuates the Distributor valve to reverse the tower function . For lower capacities, the distribution valve and control valve are integral units, however for higher capacity these control elements comprise of discrete control valves and orifices. Our Heatless air dryers are compact, economical, pre assembled, fully automatic, “Fit and Forget” type of units with very little power consumption of around 100 watts. For detailed offer, please indicate capacity, pressure, and source of compressed air.

• Brand Name: Sai Pneumatic
• Material: Stainless Steel
• Automation Grade: Automatic
• Dryer Horse Power: 1 HP
• Minimum Output Dew Point: -30 C
• Dryer Type: Refrigeration Dryer
• Power: Electricity

 Compressed air contamination problems can be simply avoided by installing a Parker domnick hunter PNEUDRI MIDIplus High Efficiency Compressed Air Dryer package fitted with OIL-X EVOLUTION filtration. The packages are suitable for use with any compressor type and are suited to point of use applications. Compressed air purification equipment must deliver uncompromising performance and reliability whilst providing the right balance of air quality with the lowest cost of operation. Many manufacturers offer products for the filtration and purification of contaminated compressed air, which are often selected only upon their initial purchase cost, with little or no regard for the air quality they provide, the cost of operation throughout their life or indeed their environmental impact. When purchasing purification equipment, delivered air quality, the overall cost of ownership and the equipment’s environmental impact must always be considered.

• Drying Capacity: 450-1130 cfm
• Dryer Technology: Dessicant
• Maximum Pressure: 12.5 kg/cm2(g)
• Material: Stainless Stell
• Weight: 850-1575 Kgs
• Country of Origin: Made in India
• Flow Volume: 480 cfm
• Purge Loss: 12 %
• Cycle Time: 10 Minutes
• Brand: Trident
• Air Inlet Temperature: 45 Degree Centigrade
• End Connection: 2" - 3" NB
• Length X Width X Height Mm In: 850 x 1320 x 1750 (Min)
• Model Name/Number: DP V2 Series
• I Deal In: New Only
• Installation/After Sales Service Available: Yes
• Operating Pressure: 7 kg/cm2(g)
• Pre-Filter Rating: 5 Micron
• After -Filter Rating: 1 Micron

ANNAIR has developed another most efficient range of Refrigerated Air Dryer series called Gold Star. This high efficient Dryer module can deliver constant dew point at varying load conditions. Main features are: 1. Tube in Tube & Tubeshell type Exchangers 2. Hot gas by pass valve with precise mechanical adjustment for constant dew point. 3. Built with system protectors for electrical & refrigeration systems 4. CFC free, eco friendly refrigerant used. 5. Automatic operation, user friendly & compact size Low power consumption 6. Compact design, requires less floor space, Micro processor as option 7. Range from 300 CFM to 2000 CFM capable to work up to air temperature of 55˚C

Available in:- Silver Line Series Gold line Heatless dryer

High efficiency integrated heat exchanger with low pressure loss. High level of efficiency for maximum power saving. Environment friendly refrigerant. Low pressure dew point. Optimum condensate separation. Minimum space requirement. Easy installation and maintenance.

• Dryer Horse Power: 10 HP
• Weight: 3035 Kg
• Country of Origin: Made in India
• Brand: Atlas Copco
• Model Name/Number: BD 1260
• Dimension: 97x46x106 Inch
• Air Circuit: Inlet Air Flange
• Connections: DIN-Flanges
• Inlet Flow FAD 7 bar(e)/ 100 psig: 2671 cfm
• Average Power Consumption: 27.7 kW
• Pressure Drop (Excluding Filters): 0.16 bar
• Filter Size: PD1260 (0.01 ppm)

Refrigeration dryers A microprocessor based control device is an advanced solution for drying compressed air. Compressed air is fed into the dryer and precooled in the air-to-air heat exchanger by the cold compressed air. The pre-cooled air passes through the refrigerant-to-air heat exchanger where it is further cooled to the required pressure dew point. The moisture in the compressed air condenses and is collected and discharged automatically. Finally, the cold discharged air is re-warmed by the incoming compressed air. This saves energy and prevents any moisture from forming downstream of the dryer in the compressed air system. Advantages at a glance : Multi-functional display Load controlled energy consumption; reduction down to 10% of nominal energy consumption Load controlled drain Low voltage monitoring Optional dry contact for alarm signal and analog signal 0-10 V for dew point temperature Maximum operation parameters: inlet temperature 60° C, ambient temperature 50° C for the whole series One component refrigerant R 134a, ozone factor zero Compact and easy to install cabinets   Adsorption Dryers Purifying compressed air on demand, free of particles and condensate, helps decrease running costs. Equipment consisting of integrated pre- and after-filters and an electronically level-controlled drain ensure pure, dry and oil-free compressed air with no loss of compressed air from condensate drainage. Economical drying is guaranteed by an integrated microprocessor, which controls the adsorption and regeneration cycles. Heat regenerative driers can be offered with the following options: Explosion proof version Pressure dew points of -70° C Steam regeneration systems and dryers for higher pressures and higher flow rates All functions, sequences, operating states and faults are displayed by LEDs on flow charts and they are monitored continuously Control of the air recovery temperature

The brand new KAESER compressed Air Dryer is authentic and competent for an entire drying level. The KAESER Dryer provides ideal drying of the compressed air for better application and operation of all the flow rates. As they are created like the high-end industrial machines, where you’ll get authentic safeguarding against dew destruction for your systems and its working and operations even under the critical conditions. Some of the specific features of KAESER Compressed Air Dryer are- The Compressed air dryer is composed of several types of dryers including Secotec refrigerated dryers, kryosec refrigerated dryers, TX series refrigerated dryers, High- pressure refrigerated dryers, high-temperature refrigerated dryers, etc. The dryer is equipped with solid energy-saving refrigeration dryer along with extraordinary latent heat storage. The dryer stands out in the market in terms of its high-end energy efficiency, compact design and user-friendliness. Long lasting durability- As the compressed air dryer is composed of corrosion defiant air piping and aluminium heat transfer because of which it ensures lifelong durability and strength to its built up. The dry compressed air produced by the compressor ranges from 37.5 to 90m3/min. It has an air and water cooling effect along with an operating pressure up to 16 bars. The optional FE micro filter provides the high level of air purity and also the heatless refrigeration absorption dryers. There’s plenty of potential savings during partial load operation and work pause. It provides the highest level of durability along with little maintenance system manufacturing. Enhanced Compact Built Up- The chamber of the dryer is entirely filled with the phase change material because of which it minimizes the need for storage material to gain the same capacity as of the conventional storage media. Enormous Savings in Limited Load Operation-Built up on the temperature at which the compressed air is cooled by a cycled chamber differs the size of the compressor and hence promote minimal power consumption in the partial load operation. During the limited load operation, the surplus cooling can be stored for a time in the thermal mass for cooling later on without any need for power usage.